I. lkçN³nigEsVgyl;BI...

Click here to load reader

  • date post

    24-Jan-2021
  • Category

    Documents

  • view

    0
  • download

    0

Embed Size (px)

Transcript of I. lkçN³nigEsVgyl;BI...

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 1

    I. lkçN³nigEsVgyl;BI AutoCAD 1> niymn½y

    AutoCAD KWCakmμviFImYyEdleRbIsMrab;KUrbøg;GKar sßabtükmμ GKÁisnI FarasaRsþ sMNg;sIuvil nig sMNg;ma:sIunenAelI Computer .rebobénkareRbI AutoCAD manEtmYyKt;. b:uEnþvaGacxusKña bnþicbnþÜceTAelIvis½ynimYy².

    2>lkçN³Biessrbs;km μviFI - GacKUrrUbPaB)anl¥nigc,as;las; - gayRsYlkñúgkarEkERbb¤lubrUbPaB - cgcaM)anyUrnigrh½ykñúgeBlEtmYy - GacbgVilnigeFVIclnarUbPaB)anl¥ - GactMeLIgrUbPaBBitkñúglMhnigBRgIkbRgÜm - GaceGaysac; B_N nig Rsemal)any:agc,as; - Gacdak; Material eGayrUbPaBtamkarBit

    3> karvivtþn_énkm μviFI - Version 1.0 (Release 1) - December 1982 - Version 1.2 (Release 2) - April 1983 - Version 1.3 (Release 3) - August 1983 - Version 1.4 (Release 4) - October 1983 - Version 2.0 (Release 5) - October 1984 - Version 2.1 (Release 6) - May 1985 - Version 2.5 (Release 7) - June 1986 - Version 2.6 (Release 8) - April 1987 - Release 9 - September 1987 - Release 10 - October 1988 - Release 11 - October 1990 - Release 12 - June 1992 (last release for Apple Macintosh ) - Release 13 - November 1994 (last release for Unix, MS-DOS and Windows 3.11) - Release 14 - February 1997 - AutoCAD 2000 (R15.0) - March 1999 - AutoCAD 2000i (R15.1) - July 2000 - AutoCAD 2002 (R15.6) - June 2001 - AutoCAD 2004 (R16.0) - March 2003 - AutoCAD 2005 (R16.1) - March 2004 - AutoCAD 2006 (R16.2) - March 2005 - AutoCAD 2007 (R17.0) - March 2006 - AutoCAD 2008 (R17.1) - March 2007 - AutoCAD 2009 (R17.2) - oct, 30, 2008 - AutoCAD 2010 (R8.0) - August, 19, 2009

    4> RbePT Computers EdlGacdMeNIrkarkm μviFI)an *. AutoCAD 2010 Ca 2D

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 2

    • Microsoft® Windows® XP Professional or Home edition (SP2 or later)

    • Intel® Pentium® 4 or AMD Athlon® dual-core processor, 1.6 GHz or higher with SSE2 technology

    • 2 GB RAM

    • 1 GB free disk space for installation

    • 1,024 x 768 VGA display with true color

    • Microsoft® Internet Explorer® 7.0 or later

    • Install from download, DVD, or CD

    *. AutoCAD 2010 Ca 3D • Intel Pentium 4 processor or AMD Athlon, 3 GHz or higher; Intel or AMD

    dual-core processor, 2 GHz or higher

    • 2 GB RAM or greater

    • 2 GB hard disk space available in addition to free space required for installation

    • 1,280 x 1,024 32-bit color video display adapter (true color) 128 MB or greater, Microsoft® Direct3D® capable workstation class

    5> rebobtMeLIgkmμviFI 1. ebIk File AutoCAD BI Drive or CD-ROM

    2. Click Files Setup (Setup.exe)

    3. Double Click on setup.exe

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 3

    4. Install

    5. Installation Product

    6. Next

    7. Accept

    8. Next

    9. Next

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 4

    10. Configure

    11. Tick Stand alone License -> Next

    12. Tick Custom -> Next

    13. Configuration Complete

    14. Install and Waiting

    15. Finish

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 5

    6> karebIk AutoCAD 2010 rebobTI 1

    bnÞab;BI)anbBa©Úlkm μ)anrYcral;enaH Icon rbs; AutoCAD )anelcecjelIpÞaMgrbs; Windows Gac Click BIrdgelI AutoCAD2010 rgcaMbnþic. rebobTI 2

    Start -> Programs -> Autodesk -> AutoCAD 2010 -> AutoCAD 2010

    7> Command and Coordinate System

    7.1. Command:KWCabBa¢amYyeRbIsMrab;sresrGkSrkat;niggayRsYlkñúgkareRbIR)as;)an rh½ssßitenAEpñkxageRkaménépÞKUr.

    cMNaM³CYnkaleKeRbIbBa¢anig Toolbars RsbeBlCamYyKñaedIm,IbegáInel,ÓnénkarKUrbøg;nig gaycgcaM)anyUr. ]TahrN¾³ Rectangle mYyGacvayCa Command: Rec nig Rectangle Toolbars

    7.2. Coordinate System:KWCaRbBn½§Kl; 0 EdlbegáItedayviucT½r x nig y k¾CacMnucsMxan; mYykñúgkareRbIR)as;bøg;kñúglMhr .

    Gab;sIus nig Gredaen Coordinate system EckecjCaBIrRbePTKW³

    • Absolute Coordinate: RKb;cMnucrUbKWeFobeTAnwgKl; O (x=0 , y=0) • Relative Coordinate: RKb;cMnucrUbKWeFobeTAnwgcMnuccugeRkayénKl; 0

    mann½yfa³ (x=0, y=0) CacMnucfμImYyeTot.

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 6

    7.3. karKUreRbIRbEvgnigmMu

    eRkABIeRbI Coordinate system manviFImYyeTotKWeRbIRbEvgGgát;eFobCamYymMu . 8. erobcMeBlKUr

    Units: KWCaxñatmYyénbNþaRbeTsEdleKniymeRbIR)aserog²xøÜn nig gayRsYlkñúgkar emIlelIpÞaMgénkarKUr.

    cuc Format menu bars -> Units Command: ddunits

    Select Scroll elI Decimal • Decimal : CaRbPaK (15.5000) • Precision: karkMNt;cMnYnxÞg;xageRkayTsPaK (0.00) • Millimeters: xñatRbEvg • Engineering: Feet and decimal inches (1’- 3.5000’’) • Architectural: Feet, inches, fractional inches (1’- 31/2’’) • Fractional: Fractional Unit (15 1/2) • Scientific: Notation (1.5500E+01)

    Select Scroll elI Decimal Degrees • Decimal Degrees Display Partial degrees as decimals (90.00)

    0,0 0,0 50

    100,0150,5050,50

    150 50

    50,50

    150 50

    Absolute Coordinate Relative Coordinate

    50

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 7

    • Deg/Min/Sec Display Partial degree as minutes and seconds of an arc (90d0’0’’)

    • Grads Display Partial degrees as grads (100.0000) • Radians Display Partial degrees as radians (1.5708) • Surveyor Display angles in surveyor units (N)

    eRCIserIs Direction Tick elI East

    - Counter Clock wise: pÞúynwigRTnicnaLikar - Clock wise: RsbnwgRTnicnaLikar

    9. kMNt;pÞaMgénkarKUr 1³1 • Limits ( Format ->Drawing Limits) • ON / OFF /< Lower Left Conner > < 0.000, 0.000>0,0 • Uper Right Conner < 420, 297 >:420,297

    cMNaM³TMhMRkdaseRbIsBVéf¶ • A0 = 841 x 1189 • A1 = 841 x 594 • A2 = 420 x 594 • A3 = 420 x 297 • A4 = 210 x 297 • A5= 210 x 148 • A6= 105 x 148

    10> TItaMg Mouse Snap eRbIsMrab;cab;bnþén Object BImYyeTAmYyEdlmanlkçN³c,as;las;nigsuRkit.

    0: East180: West

    90: North

    270: South

    0,0 x

    y

    A3

    420,297

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 8

    Command: Snap Aspect / Snap Spacing or ON/ OFF/ Rotate / Style / < 1000> 100

    • On = F9 eRbICMh‘anrbs; Mouse • Off = F9 mineRbICMh‘anrbs; Mouse • Rotate : CMh‘anrbs; Mouse edIreRTttammMukMNt;NamYy • Aspect : rMkiltamTis x nig y xusKña • Horizontal = x • Vertical = y

    • Style -> Standard /Isometric I KUrtammMu 450 11. Grid Command: grid

    Specify grid spacing(X) or [ON/OFF/Snap/Major/aDaptive/Limits/Follow /Aspect]: l00

    Display grid beyond Limits [Yes/No] : Y

    • On =F7 bgðajRklacRkRtg; • Off = F7 minbgðajRklacRkRtg;

    cMNaM³ Snap pøas;bþÚr Grid k¾pøas;bþÚrEdr Aspect: RbsinebItMél x nig y xusKñaeyIg)anragCactuekaNEkg 12> kMNt; Snap nig Grid

    • Command: Dsettings rW ( Tools menu bars / Drafting Settings)

    • Snap on (F9): TItaMg Mouse edIrtam Limits kMNt; - Snap x spacing: RbEvgG½kS x - Snap y spacing: RbEvgG½kS y

    • Grid on (F7): RbEvg Limits - Grid x spacing: RbEvgG½kS x - Grid y spacing: RbEvgG½kS y - Isometric snap :KUrCalMhb¤mMu 450 - F5 pøas;bþÚrTisedA Mouse

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 9

    • Dynamic input: sMrab;bgðajRbEvgeBleRbI Command

    13> begáItkargarfμI eRbIsMrab;begáItpÞaMgkargarf μ IEdlBMuTak;TgCamYykargarcas;

    Click File menu bars -> New ->start from scratch -> metric -> ok Ctrl+N -> start from scratch -> metric -> ok

    14> rkSakargar rkSakargarTukedIm,IbnþnaeBleRkayeTotb¤rkSaCaÉksarTuksMrab;éf¶eRkaynigPsþútag

    Click File menu bars -> save -> name files ->save Ctrl+s -> name files.dwg ->save

    15> ebIkkargarcas; ehAkargarcas;mkbnþeTotb¤EkERbcMnucxøH²EdlRtUvpøas;bþÚr.

    Click File menu bars -> open ->Directories -> name files -> open

    16> ebIk Template karebIképÞkargarEdlmanTMrg;Rsab;

    Click File menu bars -> New ->Acad.dwt -> Open

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 10

    Ctrl+N -> Acad.dwt-> Open

    Click File menu bars -> New ->use template -> ok Ctrl+N -> use Template -> ok

    17> ebIk Wizard karebIképÞkargarEdl)ankarkMNt;c,as;las;nigRtwmRtUv

    Click File menu bars -> New ->use wizard -> advanced setup

    -> ok -> Tick Decimal ->Next -> Tick Decimal Degrees ->Next

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 11

    -> Tick East ->Next -> Tick Counter Close wise ->next -> Tick size paper ->Finish

    18> karcakecj bnÞab;BI)aneFIVkarb¤cg;bBa©b;kic©karenaHeKRtUvcakecjBIkmμviFI nig biTma:sIunedIm,IrkSarkar

    )at;bg;b¤ Error files. Click File menu bars -> exit &Close Ctrl+Q

    19> EsVgyl;BI Interface TaMgenHCaKnøiHmYykñúgkardwgnigyl;énkareRbIR)as;bBa¢arbs;va. -

    OObbjjeecctt PPrrooppeerrttiieess TToooollbbaarr

    SSttaannddaarrdd TToooollbbaarr

    PPuullll--ddoowwnn MMeennuuss

    DDrraaww TToooollbbaarr

    SSoolliidd eeddiittiinngg TToooollbbaarr

    GGrraapphhiiccss CCuurrssoorr

    GGrraapphhiiccss WWiinnddooww

    CCoommmmaanndd LLiinnee

    CCuurrssoorr CCoooorrddiinnaattee DDiissppllaayy

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 12

    II. rebobeRbI 2D Command 1. Command: Mvsetup

    eRbIsMrab;kMNt;RbePTRkdasEdlman Scale nigTMhMc,as;las;eTAtambøg;. Command: Mvsetup

    Initializing... Enable paper space? [No/Yes] : n Enter units type[Scientific/Decimal/Engineering/Architectural/Metric]:m Metric Scales ================= (5000) 1:5000 (2000) 1:2000

    (1000) 1:1000 (500) 1:500

    (200) 1:200 (100) 1:100 (75) 1:75 (50) 1:50 (20) 1:20 (10) 1:10 (5) 1:5 (1) FULL

    Enter the scale factor: 100 Enter the paper width: 210 Enter the paper height: 297

    mann½yfaeyIgeRbIR)as;RbePTRkdas A4 elImaRtdæan 1/100 . 2. Command: Line (Draw menu bars -> Line)

    eRbIsMrab;;KUrbnÞat;EdlGgát;nimYy²BMu)anCab;KñaeT . k> KUrctuekagEkgmYy Command: L

    LINE Specify first point: 50, 60 Specify next point or [Undo]: @100, 0 Specify next point or [Undo]: @0, 50 Specify next point or [Close/Undo]: @-100, 0 Specify next point or [Close/Undo]: C C mann½yfaeGaybnÞat;cugeRkayrt;eTArkedIménbnÞat;vijb¤biT Object.

    x> KUrbnÞat;edayeFobnigmMu

    Command: L LINE Specify first point: 200,100 Specify next point or [Undo]: @200

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 13

    3. Command: Trace

    eRbIsMrab;KUrbnÞat;EdlmankMras;. Command: trace

    Specify trace width :10 Specify start point: click Specify next point: 100 Specify next point:

    4. Command: Poly line (Draw menu bars -> Poly line)

    eRbIsMrab;KUr bnÞat; FñÚr EdlmankMras;nigGacKUrpøas;bþÚrBIbnÞat;eTAExSekagedayGgát;TaMg Gs;Cab;Kña.

    k> KUrctuekaNEkg Command: PL Specify start point: 500,300 Current line-width is 0.0000 Specify next point or [Arc/Half width/Length/Undo/Width]: @100, 0 Specify next point or [Arc/Close/Half width/Length/ Undo/Width]: @0, 50 Specify next point or [Arc/Close/Half width/Length/ Undo/Width]: @-100, 0 Specify next point or [Arc/Close/Half width/Length/ Undo/Width]: @0,-50

    x> KUrctuekaNEkgmankMras;

    Command: PL PLINE Specify start point: 200,300 Current line-width is 0.0000

    Specify next point or [Arc/Half width/Length/Undo/Width]: W Specify starting width : 10 Specify ending width : 10 Specify next point or [Arc/Half width/Length/Undo/Width]: @100, 0 Specify next point or [Arc/Close/Half width/Length/ Undo/Width]: @0, 50 Specify next point or [Arc/Close/Half width/Length/ Undo/Width]: @-100, 0 Specify next point or [Arc/Close/Half width/Length/ Undo/Width]: @0,-50

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 14

    K> KUrG½kS Command: Pl Specify start point: 200,300 Current line-width is : 0.00 Specify next point or [Arc/Half width/Length/Undo/Width]: A Specify endpoint of arc or [Angle/CEnter/Direction/Half width/Line/Radius/Second pt/Undo/ Width]: 200 Specify endpoint of arc or [Angle/CEnter/Close/Direction/Half width/Line/Radius/Second pt/Undo /Width]: 200 Specify endpoint of arc or [Angle/CEnter/Close/Direction/Half width/Line/Radius/Second pt/Undo/ Width]: 200

    5. Command: Line type (Format menu bars -> line type) eRbIsMrab;ehAykRbePTbnÞat;mkeRbItamtMrUvkar .

    Command: lt

    -> Load…

    -> Right click -> select all -> ok -> ok

    viFImYyeToteyIgRKan;EtcucelI Tools property -> by layer TI2 -> other…

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 15

    -> Other…

    -> Load -> Right click -> select all

    -> Ok -> ok

    6. Command: Line type scale

    eRbIsMrab;dak;emKuNeGayKMlaténbnÞat; . Command: lts

    LTSCALE Enter new linetype scale factor : 20 emKuN Regenerating model.

    7. Command: Color (Format menu bars -> color)

    eRbIsMrab;dak;BN’eGaybnÞat;nig Object epSg²eTot . Command: color

    viFImYyeToteyIgRKan;EtcucelI Tools property -> by layer TI1 -> Color

    8. Command: Line weight (Format menu bars ->line weight)

    eRbIsMrab;dak;kMras;eGaybnÞat;nig Object epSg²eTot . Command: lw

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 16

    viFImYyeToteyIgRKan;EtcucelI Tools property -> by layer TI3 -> line weight…

    9. Command: Copy clip (Edit menu bars -> copy) (Ctrl+c) eRbIsMrab;ftcMlgrUbBI Files mYyeTA Files mYyeTot . Command: copy clip

    Select objects: click object Select objects: Right click

    10. Command: Paste (Edit menu bars -> paste) (Ctrl+v)

    eRbIsMrab;yk Object Edl)anftcMlgehIy . Command: pasteclip

    Specify insertion point: Click TItaMgEdlTuk 11. Command: Cut (Edit menu bars -> Cut) (Ctrl+x) eRbIsMrab;ftcMlg Object eday Object cas;KW)anlubecal. Command: cutclip

    Select objects: click object Select objects: Right click

    12. Command: Close (Files menu bars -> Close) (Ctrl+F4)

    eRbIsMrab;biT object. Command: Close

    13. Command: Exit (Files menu bars -> exit) (Alt+F4)

    eRbIsMrab;cakecjBIkmμviFI. Command: exit

    14. Command: BlipMode eRbIsMrab;biTebIksBaØabUkeBlkMBugKUr Command: blipmode

    Enter mode [ON/OFF] : ON

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 17

    15. Command: Redraw (View menu bars -> Redraw) eRbIsMrab;sMGatépÞ Screen Command: redraw

    16. Command: Regen, Regen all (View menu bars -> Regen, Regen all) eRbIsMrab;karBRgIkbRgÜmrUb nig eFVIeGayExSekagmanragmUlvij Command: Regenall 17. Command: Erase (Modify menu bars -> Erase)

    eRbIsMrab;lub Object ecal . Command: E

    Select objects: Click object Select objects: Right Click

    kar Select object manBIrrebobKW³ - TI1 kar Select BIeqVgeTAsþaM

    Select enHKW Select edaykat;TaMgGs;eTIbGaclub)anTaMgGs; - TI2 kar Select BIsþaM eTAeqVg Select enHKW Select RKan;Etkat;EpñkmYyén Object KWlub)anTaMgGs;

    18. Command: Lengthen (Modify menu bars -> lengthen) eRbIsMrab;bEnßm bnßy srub nigkat;; bnÞat; rW ExSekag CaPaKry. karbEnßmbnÞat; Command: Len

    LENGTHEN Select an object or [DElta/Percent/Total/DYnamic]: DE Enter delta length or [Angle] : 100 Select an object to change or [Undo]: Click Object (Add Line) Select an object to change or [Undo]: Right Click (Continue or Finish)

    karbEnßmExSekag Command: Len

    LENGTHEN Select an object or [DElta/Percent/Total/DYnamic]: De Enter delta length or [Angle] : A Enter delta angle : 30 Select an object to change or [Undo]: Click Object Select an object to change or [Undo]: Right Click

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 18

    kat;bnßyCaPaKry Command: len

    LENGTHEN Select an object or [DElta/Percent/Total/DYnamic]: P Enter percentage length : 50 Select an object to change or [Undo]: Click Object Select an object to change or [Undo]: Right Click

    srub Command: len

    LENGTHEN Select an object or [DElta/Percent/Total/DYnamic]: T Specify total length or [Angle] : 1000 Select an object to change or [Undo]: Click Object Select an object to change or [Undo]: Right Click

    karbEnßmnigbnßytamcitþ Command: len

    LENGTHEN Select an object or [DElta/Percent/Total/DYnamic]: DY Select an object to change or [Undo]: Click Object

    Specify new end point: 100 RbEvgbEnßm 19. Command: Donut (Draw menu bars -> donut)

    eRbIsMrab;KUrrgVg;EdlmanépÞnigkg;Lan. Command: do

    DONUT Specify inside diameter of donut : 0 Specify outside diameter of donut : 20 Specify center of donut or : Click Point Specify center of donut or : Right Click

    20. Command: Fill (Tools menu bars-> option -> Apply solid fill) eRbIsMrab;dak;nigbiTépÞrbs; Donut b¤ Hatch.

    Command: fill Enter mode [ON/OFF] : OFF

    Automatic save to enHCakEnøgTuk On: ebIk Off: biT

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 19

    Not: used Command: Re 21. Command: Offset (Modify menu bars -> Offset)

    eRbIsMrab;ftcMlg object edaykMNt;RbEvgc,as;las;. Command: o

    OFFSET Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0 Specify offset distance or [Through/Erase/Layer] : 100 Select object to offset or [Exit/Undo] : Click Object Specify point on side to offset or [Exit/Multiple/Undo] : Click Select object to offset or [Exit/Undo] :

    -Exit: ecjBI Command

    -Multiple: ftcMlgcMnYneRcIn 22. Command: MOVE (Modify menu bars -> Move)

    eRbIsMrab;pøas;bþÚrTItaMgrbs; Object . Command: M

    MOVE Select objects: Specify opposite corner: Click object Select objects: Right Click Specify base point or [Displacement] : Click Specify second point or: Click

    23. Command: Zoom (View menu -> Zoom) eRbIsMrab;BRgIkbRgYm Object.

    k> Zoom enAkñúg Screen EtmYy Command: Z

    ZOOM Specify corner of window, enter a scale factor (nX or nXP), or [All/Center/Dynamic/Extents/Previous/Scale/Window]: A

    x> Zoom cMnuckNþalén Screen Command: Z

    ZOOM Specify corner of window, enter a scale factor (nX or nXP), or [All/Center/Dynamic/Extents/Previous/Scale/Window]: C

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 20

    Specify center point: Click Enter magnification or height : Click

    Specify second point: Click

    K> BRgIkrUbPaBeGayeBj Screen Command: Z

    ZOOM Specify corner of window, enter a scale factor (nX or nXP), or [All/Center/ Dynamic/ Extents/ Previous/ Scale/ Window] : E

    X> Rtlb;mkeRkayvij Command: Z

    ZOOM Specify corner of window, enter a scale factor (nX or nXP), or [All/Center/Dynamic/Extents/Previous/Scale/Window] : P

    g> kareRbIemKuN Command: Z

    ZOOM Specify corner of window, enter a scale factor (nX or nXP), or [All/Center/Dynamic/Extents/Previous/Scale/Window]: S Enter a scale factor (nX or nXP): 2 xp

    c> bgðajCalkçN³ Window Command: Z

    ZOOM Specify corner of window, enter a scale factor (nX or nXP), or [All/Center/Dynamic/Extents/Previous/Scale/Window]: W Specify first corner: 20 Specify opposite corner: 50

    q> karBRgIkbRgYm (+) sMrab;BRgIk Object (-) sMrab;BRgYm Object C> Exit

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 21

    23. Command: Object Snap (Tools menu bars -> Drafting Settings) eRbIsMrab;kMNt;cMnuccab;rbs; Object Command: Os

    - Temporary Tracking point: eRbIsMrab;cab;cMnucbnþrbs; Object

    - Snap From: eRbIsMrab;cab;cMnuceFobnigG½kS x, y

    - End Point: eRbIsMrab;cab;cMnuccugrbs; Object

    - Midpoint: eRbIsMrab;cab;cMnuckNþalrbs;; Object

    - Intersection: eRbIsMrab;cab;cMnucRbsBVrbs;; Object

    - Apparent Intersection: eRbIsMrab;cab;cMnuckat;Kñarbs;; Object

    - Extension: eRbIsMrab;cab;cMnucmYyedaykMNt;RbEvgc,as;las;

    - Center: eRbIsMrab;cab;cMnucp©itrgVg;

    - Quadrant: eRbIsMrab;cab;cMnucrgVg;EckCabYn

    - Tangent: eRbIsMrab;cab;cMnucb:HrgVg;

    - Perpendicular: eRbIsMrab;cab;cMnucEkg

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 22

    -Nod: eRbIsMrab;cab;cMnucrbs; Point

    -Insert: eRbIsMrab;cab;cMnuc Block

    -Nearest: eRbIsMrab;cab;cMnucCitbMput

    -Parallel: eRbIsMrab;;cMnucRsb

    24. Command: Rectangle (Draw menu bars -> Rectangle)

    eRbIsMrab;KUrctuekaNEkg. k> KUrctuekaNEkgFm μta

    Command: REC RECTANGLE Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: Click Point Specify other corner point or [Dimensions]: Click Point

    x> KUrctuekaNEkgEdlRcitRCug

    Command: REC RECTANGLE Current rectangle modes: Chamfer=10.0000 x 30.0000 Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/ Width]: C Specify first chamfer distance for rectangles :10 Specify second chamfer distance for rectangles : 20 Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/ Width]: Click Pont Specify other corner point or [Dimensions]: Click Pont

    K> KUrctuekaNEkgEdlmanRCugmUl

    Command: REC RECTANGLE Current rectangle modes: Chamfer=10.0000 x 10.0000 Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/ Width]: F

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 23

    Specify fillet radius for rectangles : 20 ; Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/ Width]: Click Point Specify other corner point or [Dimensions]: Click Point

    X> KUrctuekaNEkgEdlmankMras;

    Command: REC RECTANGLE Current rectangle modes: Width=2.0000 Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/ Width]: W Specify line width for rectangles : 10 Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/ Width]: Click Point Specify other corner point or [Dimensions]: Click Point

    25. Command: Circle (Draw Menu bars -> Circle) eRbIsMrab;KUrrgVg;. k> KUrrgVg;cab;epþImBIp©wt Command: C

    CIRCLE Specify center point for circle or [3P/2P/Ttr (tan tan

    radius)]: Click cMnucTI1 Specify radius of circle or [Diameter]: Click cMnucTI2

    x> karKUredayeRbIBIrcMnuc eKGacykcMnucBIr CaCMnYyedIm,IKYrrgVg;ehIycMnucenaHGacCa cugbnÞat; rW CacMnucd¾éTeTotk_ )an.

    Command: C CIRCLE Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: 2 Specify first end point of circle's diameter: Click point Specify second end point of circle's diameter: Click point

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 24

    K> KUrrgVg;edayeRbIbIcMnuc Command: C

    CIRCLE Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: 3p Specify first point on circle: Click point Specify second point on circle: Click point Specify third point on circle: Click point

    X> KUrrgVg;edayb:HBIrcMnucnigkaMrgVg; Command: C

    CIRCLE Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: Ttr

    Specify point on object for first tangent of circle: Click b:HTI1 Specify point on object for second tangent of circle: Click b:HTI2 Specify radius of circle : 50

    g> KUrrgVg;edayb:HbIcMnuc

    Draw Menu->Circle->Tan Tan Tan Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: _3p Specify first point on circle: Click Object

    b:HcMnucTI1 Specify second point on circle: Click object b:HcMnucTI2 Specify third point on circle: Click Object b:HcMnucTI3

    26. Command: Arc (Draw Menu bar - > Arc)

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 25

    eRbIsMrab;KUrExSekag . k> KUrGgát;FñÚredayeRbIbIcMnuc

    Command: arc

    Specify start point of arc or [Center]: Click cMnucTI1 Specify second point of arc or [Center/End]: Click cMnucTI2 Specify end point of arc: Click cMnucTI3

    x> KUrGgát;FñÚredayeRbIcMnuckNþalnigmMubgVil Command: arc

    Specify start point of arc or [Center]: c Specify center point of arc: click point Specify start point of arc: click point Specify end point of arc or [Angle/chord Length]: A Specify included angle: 180

    X> KUrGgát;FñÚredayeRbIBIrcMnucnigkaM Command: _arc Specify start point of arc or [Center]: Click Point Specify second point of arc or [Center/End]: _e Specify end point of arc: Click Point Specify center point of arc or [Angle/Direction/Radius]: _r Specify radius of arc: 60

    - 3 Point KWCakarKUrFñÚredaydwg3cMnuc - Start, Center, End KWCakarKUrFñÚredaydwgcMnuccab;epþIm kNþalnigbBa©b; - Start, Center, Angle KWCakarKUrFñÚredaydwgcMnuccab;epþIm kNþalnigmMu - Start, Center, Length KWCakarKUrFñÚredaydwgcMnuccab;epþIm kNþalnigRbEvg - Start, End, Angle KWCakarKUrFñÚredaydwgcMnuccab;epþIm bBa©b;nigmMu

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 26

    - Start, End, Direction KWCakarKUrFñÚredaydwgcMnuccab;epþIm bBa©b;nigmMueFob - Start, End, Radius KWCakarKUrFñÚredaydwgcMnuccab;epþIm bBa©b;nigkaMrgVg; - Center, Start, End KWCakarKUrFñÚredaydwgcMnuckNþal cMnuccab;epþIm nigbBa©b; - Center, Start, Angle KWCakarKUrFñÚredaydwgcMnuckNþal cMnuccab;epþIm nigmMu - Center, Start, Length KWCakarKUrFñÚredaydwgcMnuckNþal cMnuccab;epþImnigRbEvg - Continue bnþ 27. Command: Point (Draw Menu bars -> Point) eRbIsMrab;KUrcMnucBugehIyTMhMxusKñatamkarkMNt;TukCamun. Command: point

    Current point modes: PDMODE=0 PDSIZE=0.0000 Specify a point: Click Point

    28. Point style (Format Menu bars -> Point) eRbIsMrab;kMNt;RbePTrbs; Point EdleyIgcg;)an. Command: ddptype

    RbsinebIeyIgcg;)an Style NamYyRtUveRbI Left Mouse cuceGaycM Point EdleyIgcg; )an .

    29. Command: Polygon (Draw Menu bars -> Polygon) eRbI;sMrab;KUrBhuekaN. cMnYnRCugeRcInbMputKW 1024.

    k> KUrBhuekaNcarikkñúgrgVg;

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 27

    Command: pol POLYGON Enter number of sides : 6 Specify center of polygon or [Edge]: Click Point Enter an option [Inscribed in circle/Circumscribed about circle] : I Specify radius of circle: 60

    x> KUrBhuekaNcarikeRkArgVg; Command: Pol

    POLYGON Enter number of sides : 6 Specify center of polygon or [Edge]: Click Point Enter an option [Inscribed in circle/Circumscribed about circle] : c Specify radius of circle: 70

    K> KUrBhuekaNedayeRbIRbEvgRCug Command: pol

    Enter number of sides : 8 Specify center of polygon or [Edge]: e Specify first endpoint of edge: Click Point Specify second endpoint of edge: 100

    30. Command: Construction Line (Draw Menu bars -> Construction Line) eRbIsMrab;KUrbnÞat;KμanEdnkMNt;. k> KUrbnÞat;edayeRbIBIrcMnuc

    Command: xline Specify a point or [Hor/Ver/Ang/Bisect/Offset]: Click Point Specify through point: Click Point

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 28

    x> KUrbnÞat;CaGab;sIus Command: xline

    Specify a point or [Hor/Ver/Ang/Bisect/Offset]: V Specify through point:

    K> KUrbnÞat;CaGredaen

    Command: xline Specify a point or [Hor/Ver/Ang/Bisect/Offset]: V Specify through point: Click Point

    X> KUrbnÞat;CamMu Command: xline

    Specify a point or [Hor/Ver/Ang/Bisect/Offset]: a Enter angle of xline (0) or [Reference]: 45 Specify through point: Click point

    g> KUrbnÞat;eFobmMu

    Command: xl XLINE Specify a point or [Hor/Ver/Ang/Bisect/Offset]: b Specify angle vertex point: 45 Specify angle start point: 45 Specify angle end point: 45 Specify angle end point: Click Point Specify angle end point:

    31. Command: Ray (Draw Menu bars -> Ray)

    eRbIsMrab;KUrbnÞat;EdlmanEdnkMNt;Bak;kNþal. Command: ray

    Specify start point: Click Point Specify through point: Click Point

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 29

    32. Command: Multi line (Draw Menu bars ->Multiline) eRbIsMrab;KUrbnÞat;eRcIn.

    k> KUrbnÞat;eRcInedaykMNt;TMhM Command: ml

    MLINE Current settings: Justification = Top, Scale = 200.00, Style = STANDARD Specify start point or [Justification/Scale/STyle]: s Enter mline scale : 200 Current settings: Justification = Top, Scale = 200.00, Style = STANDARD Specify start point or [Justification/Scale/STyle]: Click Point Specify next point: Click Point Specify next point or [Undo]:

    x> KUrbnÞat;eRcInedayeRbIxagelI Command: ML

    Current settings: Justification= Top, Scale = 20.00, Style = STANDARD Specify start point or [Justification/Scale/STyle]: s Enter mline scale : 200 Current settings: Justification = Top, Scale = 200.00, Style = STANDARD Specify start point or [Justification/Scale/STyle]: j Enter justification type [Top/Zero/Bottom] : T Current settings: Justification = Top, Scale = 200.00, Style = STANDARD Specify start point or [Justification/Scale/STyle]: Click Point Specify next point: Click Point Specify next point or [Undo]: Enter

    K> KUrbnÞat;eRcInedayeRbIxageRkam Command: ml

    MLINE Current settings: Justification = Top, Scale = 200.00, Style = STANDARD Specify start point or [Justification/Scale/STyle]: j Enter justification type [Top/Zero/Bottom] : b Current settings: Justification = Bottom, Scale = 200.00, Style = STANDARD

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 30

    Specify start point or [Justification/Scale/STyle]: Click Point Specify next point: Click Point

    X> KUrbnÞat;eRcInedayeRbIkNþal Command: ml

    MLINE Current settings: Justification = Bottom, Scale = 200.00, Style = STANDARD Specify start point or [Justification/Scale/STyle]: j Enter justification type [Top/Zero/Bottom] : z Current settings: Justification = Zero, Scale = 200.00, Style = STANDARD Specify start point or [Justification/Scale/STyle]: Click Point Specify next point: Click Point Specify next point or [Undo]: Enter

    g> karkMNt;kñúg Menu bars

    - Set Current: sMrab;kMNt;eQ μaHcugeRkay - Name: sMrab;dak;eQ μaHfμI - Modify: sMrab;EkERb - Rename: bþÚreQ μaH - Delete: sMrab;lub - Description: sMrab;erobrab; - Save: rkSaTuk - Add: sMrab;bEnßmbnÞat; - OK, Cancel

    - Delete sMrab;lub

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 31

    - Offset sMrab;kMNt;KMlat - Color dak;B’NbnÞat; - Line type sMrab;kMNt;RbePTbnÞat; .

    33. Command: Sketch eRbIsMrab;KUrxVasb¤KUrKμaneRBognigxñatRtwmRtUveLIy. Command: Sketch

    Record increment : 0.5 Sketch. Pen eXit Quit Record Erase Connect. *Cancel*

    34. Command: Copy (Modify Menu bars -> Copy)

    eRbIsMrab;ftcMlg Object. k> Single Copy

    Command: Co COPY Select objects: Click Object Select objects: Right Click Specify base point or displacement, or [Multiple]: Click Object Specify second point Of displacement or : Click Object;

    x> Multi Copy

    Command: Co COPY Select objects: Click Object Select objects: Click Object Specify base point or displacement, or [Multiple]: M Specify base point: Click Object Specify second point of displacement or : Click Object Specify second point of displacement or : Click Object Specify second point of displacement or first point as displacement>: Click Object Specify second point of displacement or : Click Object

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 32

    35. Command: Array (Modify Menu bars -> array)

    eRbIIsMrab;ftcMlg Object EdlmanlkçN³CaCYr CargVg;nigmMutamkarkMNt;RbEvgCamun. k> ftcMlgCa Rectangular array

    ftcMlgCaCYrmanbIrKW CYredk (Rows) CYrQr (Columns) mMu (Angle)

    - Select Objects sMrab; Click rUb - Rows cMnYnCYredk - Columns cMnYnCYrQr - Rows Offset RbEvgKMlatBI Row mYyeTA Row mYy - Column Offset RbEvgKMlatBI Column mYyeTA Column mYy - Angle of array bgVil Object tammuMkMNt;

    x> ftcMlgCargVg;

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 33

    eRbIsMrab;ftcMlg Object tamlkçN³CargVg;nigcMnYnEdl)ankMNt;.

    - Center point: cMnucp©wtEdlRtUvbgVil - Select object: Click rUb - Total number of items: cMnYn Object EdlcMlg - Angle to fill: cMnYnmMubgVil - Ok: yl;RBm

    36. Command: Mirror (Modify Menu bars -> Mirror)

    eRbIsMrab;qøúH Object edaymancMnucG½kSeFobmYyCaeKal. Command: mi MIRROR Select objects: Click Object Select objects: Right Click Specify first point of mirror line: Click Point Specify second point of mirror line: Click Point Erase source objects? [Yes/No] : Enter

    37. Command: Rotate (Modify Menu bars ->Rotate)

    eRbIsMrab;bgVil Object . k> kareRbImMu

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 34

    Command: Ro ROTATE Select objects: Click Object Select objects: Right Click Specify base point: Click object Specify rotation angle or [Reference]: 45

    x> kareRbI Reference

    Command: Ro ROTATE Current positive angle in UCS: ANGDIR=counter clock wise ANGBASE=0 Select objects: Click Object Select objects: Right Click Specify base point: Click Point Specify rotation angle or [Copy/Reference] : r Specify the reference angle : 0 Specify the new angle or [Points] : 60

    38. Command: Extend (Modify Menu bars -> Extend)

    eRbIsMrab;BnøÚtbnÞat;eTAtamkarkMNt;.mandUcCa Command: Line, Poly line, Arc l. k> BnøÚtmþgmYy

    Command: Ex Select objects: Click Object Select objects: Right Click Select object to extend or shift-select to trim or [Project/Edge/ Undo]: Click Object

    x> BnøÚtmþgeRcIn

    Command: Ex Select objects: Click Object Select object to extend or shift-select to trim or [Project/Edge/ Undo]: F First fence point: Click Object Specify endpoint of line or [Undo]: Click Object Specify endpoint of line or [Undo]: Click Object Select object to extend or shift - select to trim or [Project/Edge/ Undo]: Enter

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 35

    39. Command: Trim (Modify Menu bars -> Trim)

    eRbIsMrab;kat; Object eGay)anesμ IredayeFobeTAnigbnÞat;eKalNamYy. k> Trim mþgmYy

    Command: Tr Select objects: Click Object Select objects: Right Click Select object to trim or shift - select to extend or [Project/ Edge/ Undo]: Click Object Select object to trim or shift - select to extend or [Project/Edge/ Undo]: Click Object Select object to trim or shift - select to extend or [Project/Edge/ Undo]: Enter

    x> Trim mþgeRcIn

    Command: Tr Select objects: Click Object Select object to trim or shift - select to extend or [Project/Edge/ Undo]: F Specify endpoint of line or [Undo]: Click Object Specify endpoint of line or [Undo]: Click Object Specify endpoint of line or [Undo]: Click Object Specify endpoint of line or [Undo]: Click Object Select object to trim or shift - select to extend or [Project/Edge/ Undo]: Enter

    40. Command: Fillet (Modify Menu bar -> Fillet)

    eRbIsMrab;eFVIeGayRCugmanragmUlehIyRCugrbs;vaGacCa Line, Poly Line l.

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 36

    k>karkMNt;kaM Command: F

    FILLET Current settings: Mode = TRIM, Radius = 0.0000 Select first object or [Poly line /Radius/Trim/mUltiple]: R Specify fillet radius : 6 Select first object or [Poly line/Radius/Trim/mUltiple]: Click Object Select second object: Click Object

    x> Ca Poly line Command: F

    FILLET Current settings: Mode = TRIM, Radius = 0.0000 Select first object or [Undo/Poly line/Radius/Trim/Multiple]: R Specify fillet radius : 5 Select first object or [Undo/Poly line/Radius/Trim/Multiple]: P Select 2D poly line: Click Object 4 lines were filleted

    K> CacMnYneRcIn Command: F

    FILLET Current settings: Mode = TRIM, Radius = 5.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: R Specify fillet radius : 20 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: m Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Click Select second object or shift-select to apply corner: Click Object Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Click Select second object or shift-select to apply corner: Click Object Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 37

    41. Command: Chamfer (Modify Menu bars -> Chamfer)

    eRbIsMrab;RcibRCugén Object Edl)ankMNt;c,as;las; . k> karkMNt;RbEvg

    Command: Cha CHAMFER (TRIM mode) Current chamfer Dist1 = 0.0000, Dist2 = 0.0000 Select first line or [Poly line /Distance/Angle/Trim/Method/ mUltiple]: D Specify first chamfer distance : 1000 Specify second chamfer distance : 1000 Select first line or [Poly line/Distance/Angle/Trim/Method/ mUltiple]: Click Object Select second line: Click Object

    x> karkMNt;mMu

    Command: Cha CHAMFER (TRIM mode) Current chamfer Dist1 = 4.0000, Dist2 = 3.0000 Select first line or [Poly line/Distance/Angle/Trim/Method/ mUltiple]: A Specify chamfer length on the first line : 1000 Specify chamfer angle from the first line : 45 Select first line or [Poly line/Distance/Angle/Trim/Method/ mUltiple]: Click Object Select second line: Click Object

    K> Ca Poly line Command: CHA

    CHAMFER (TRIM mode) Current chamfer Dist1 = 20.0000, Dist2 = 20.0000 Select first line or [Undo/Polyline/Distance/Angle/Trim/mEthod/ Multiple]: D Specify first chamfer distance : 1000 Specify second chamfer distance : 1000 Select first line or [Undo/Polyline/Distance/Angle/Trim/mEthod/ Multiple]: p Select 2D poly line: Click Object 4 lines were chamfered

    X> karRcitmþgcMnYneRcIn

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 38

    Command: Cha CHAMFER (TRIM mode) Current chamfer Dist1 = 20.0000, Dist2 = 20.0000 Select first line or [Undo/Polyline/Distance/Angle/Trim/mEthod/ Multiple]: A Specify chamfer length on the first line : 1000 Specify chamfer angle from the first line : 45 Select first line or [Undo/Polyline/Distance/Angle/Trim/mEthod/ Multiple]: m Select first line or [Undo/Polyline/Distance/Angle/Trim/mEthod/ Multiple]: Click Object Select second line or shift-select to apply corner: Click Object Select first line or [Undo/Polyline/Distance/Angle/Trim/mEthod/ Multiple]: Click Object Select second line or shift-select to apply corner: Click Object Select first line or [Undo/Polyline/Distance/Angle/Trim/mEthod/ Multiple]: enter

    42. Command: Explode (Modify Menu bars -> Explode)

    eRbIsMrab;bMEbk Object eGayeTACa Segments tUc². Object EdlGac bMEbk)andUcCa Block, Region, Poly line.

    Command: X EXPLODE Select objects: Click Point Select objects: Right Click

    43. Command: Scale (Modify Menu bars -> Scale) eRbIsMrab;BRgIknigbRgYm Object edayeRbIemKuNnigeRbITMhMeFob. k> karkMNt;emKuN

    Command: Sc SCALE Select objects: Click Object Select objects: Right Click Specify base point: Click Point Specify scale factor or [Reference]: 100

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 39

    x> karkMNt;emKuN Command: Sc

    SCALE Select objects: Click Object Select objects: Right Click Specify base point: Click Point Specify scale factor or [Reference]: R Specify reference length : 1000 Specify new length or [Points] : 5000

    44. Command: Divide (Draw Menu bars -> Point -> Divide)

    eRbIsMrab;edAcMnuc rW EckcMnucenAelI Object . k> EckCacMnuc

    dMbUgeyIgRtUveRCIserIs Point Style Camunsin . Command: Div

    DIVIDE Select object to divide: Click Object Enter the number of segments or [Block]: 4

    x> EckCacMnYnEdl)anbegáItTuk dMbUgeyIgRtUvbegáIt Block mYyEdleyIgcg;eRbICamYy Divide CamunsineTIbeK

    eRbI Divide Command )an. Command: Div

    DIVIDE Select object to divide: Click Object Enter the number of segments or [Block]: B Enter name of block to insert: khin Align block with object? [Yes/No] : Y Enter the number of segments: 4

    K> karEckedayminbgVi Command: Div

    DIVIDE Select object to divide: Click Object Enter the number of segments or [Block]: B Enter name of block to insert: khin

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 40

    Align block with object? [Yes/No] : N Enter the number of segments: 10

    45. Command: Measure (Draw Menu bars -> Point -> Measure)

    eRbIsMrab;EckRbEvgGgát;EdlenAelI Object . k> EckCacMnuc Command: Me

    Select object to measure: Click Object Specify length of segment or [Block]: 100

    x> EckCacMnYnEdl)anbegáItTuk Command: Me

    MEASURE Select object to measure: Click Object Specify length of segment or [Block]: B Enter name of block to insert: khin Align block with object? [Yes/No] : Y Specify length of segment: 100

    46. Command: Units (Format Menu bars -> Units) eRbIsMrab;kMNt;xñatkñúgeBlKUr. xñatkñugRsukEx μreKyk Decimal nigTisedAmMu eKyk

    Decimal Degrees. Command: units

    RsbRTnicnaLi

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 41

    47. Command: Boundary (Draw Menu bars -> Boundary)

    eRbIsMrab;begáIt Object eGaymanépÞnigsac;.

    Command: Bo BOUNDARY Select internal point: Selecting everything... Selecting everything visible... Analyzing the selected data... Analyzing internal islands... Select internal point: Click Center Point BOUNDARY created 1 poly line

    begáItehIyRtUveRbI Command: Move edIm,IykrUbecj

    48. Command: Area (Tools Menu bars -> Inquiry -> Area)

    eRbIsMrab;KitRkLaépÞnigbrimaNrbs; Object . k> KNnaRkLaépÞ

    Command: aa AREA Specify first corner point or [Object/Add/Subtract]: O Select objects: Click Object Area = 100, Perimeter = 40

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 42

    x> KNnaRkLaépÞbEnßm

    Command: aa AREA Specify first corner point or [Object/Add/Subtract]: a Specify first corner point or [Object/Subtract]: o (ADD mode)Select objects: Click Object Area = 2500.0000, Perimeter = 200.0000 Total area = 2500.0000 (ADD mode) Select objects: Click object Area = 1600.0000, Perimeter = 160.0000 Total area = 4100.0000 (ADD mode) Select objects: Specify first corner point or [Object/Subtract]:

    K> KNnaRkLaépÞbnßy Command: aa

    AREA Specify first corner point or [Object/Add/Subtract]: s Specify first corner point or [Object/Add]: a Specify first corner point or [Object/Subtract]: o (ADD mode) Select objects: Click Object Area = 2500.0000, Perimeter = 200.0000 Total area = 2500.0000 (ADD mode) Select objects: Right Click Specify first corner point or [Object/Subtract]: s Specify first corner point or [Object/Add]: o (SUBTRACT mode) Select objects: Click Object Area = 1600.0000, Perimeter = 160.0000 Total area = 900.0000 (SUBTRACT mode) Select objects: Specify first corner point or [Object/Add]: Enter

    TI1 TI2

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 43

    49. Command: ID Point (Tools Menu bars -> Inquiry -> ID Point)

    mantYnaTIsMrab;rk Coordinate rbs; Object mYyenAelI screen . Command: id

    Specify point: Click Object X = 100 Y = 200 Z = 0.00

    50. Command: List (Tool Menu bars -> Inquiry ->List)

    eRbIsMrab;bgðajlkçN³rbs; Object nImYy²GacCabnÞat; CaRkLaépÞmYynigepSg²eTot. k> sMrab;bnÞat;

    Command: li LIST Select objects: Click Object Select objects: Right Click

    LINE Layer: "0" Space: Model space Handle = 89 From point, X= 8.7301 Y= 20.7121 Z= 0.0000 To point, X= 32.2874 Y= 20.7121 Z= 0.0000 Length = 23.5574, Angle in XY Plane = 0 Delta X = 23.5574, Delta Y = 0.0000, Delta Z = 0.0000

    x>ctuekaNEkg Command: li

    LIST Select objects: Click Object Select objects: Right Click

    TI1 TI2

    Line

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 44

    LWPOLYLINE Layer: "0" Space: Model space Handle = 8A Closed Constant width 0.0000 Area 5000.0000 Perimeter 300.0000 At point X= 9.6621 Y= 12.5338 Z= 0.0000 At point X= 109.6621 Y= 12.5338 Z= 0.0000 At point X= 109.6621 Y= 62.5338 Z= 0.0000 At point X= 9.6621 Y= 62.5338 Z= 0.0000

    51. Command: Text Style (Format menu bars -> Text Style)

    eRbIsMrab;kMNt; RbePT TMhM GkSr.karkMNt;GkSrmansar³sMxan;kñúgkarsresr)aneRcIn RbePTenAkñúgrUbEtmYy. dUcCakarkMNt;GkSrsMrab; elx Code kMNt; RbePTGkSrsMrab;sresr cMNgeCIgepSg² l.kñúgrUbeKGacsresrCaGkSrExμrnigGkSr Englishk¾)an .

    Command: St

    Font Name: sMrab;eRCIserIsyk Style rbs; Font ehIybnÞab;mkeRCIserIsykkMBs; GkSrRtg; kEnøg Height . edIm,IkMNt;kMBs;GkSrRtUvKitGMBI Scale EdlRtUvKUr.

    - KUr Scale 1:1 dak;kMBs;GkSr 3 mann½yfa 3mm*1=3 - KUr Scale 1:10 dak;kMBs;GkSr 3 mann½yfa 3mm*10=30 - KUr Scale 1:20 dak;kMBs;GkSr 3 mann½yfa 3mm*20=60 - KUr Scale 1:50 dak;kMBs;GkSr 3 mann½yfa 3mm*50=150 - KUr Scale 1:100 dak;kMBs;GkSr 3 mann½yfa 3mm*100=300 - KUr Scale 1:200 dak;kMBs;GkSr 3 mann½yfa 3mm*200=600

    Select Object

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 45

    - KUr Scale 1:500 dak;kMBs;GkSr 3 mann½yfa 3mm*500=1500 eRkayBIeGaykMBs;GkSrrYcRtUveGayeQaμHmYyeday Click eTAelIGkSr New Edlsßit enAkñúg tMbn; Style Name .eRkayBI Click elI New eK)anrUbdUcxageRkam³

    52. Command: DTEXT (Draw Menu bars -> Text -> Single Line Text)

    DTEXT mkBIBakü Dynamic Text KWeRbIsMrab;sresr Text EdlmancMnYnGkSrtic dYcCasresrcMNgeCIgrbs;bøg;.eKGacbegáIt Text style eRcInRbsineKcg;eRbI Text style NamYyenaHeKRtUv Activate Text style enaHCamunsin. cUleTAtarag Text style ehIyykeQ μaH Text style dak;elxeGayecjmkenAkénøg Style Name rYceRbI Command: Dtext CaeRsc.

    Command: dt TEXT Current text style: "Standard" Text height: 5.2606 Specify start point of text or [Justify/Style]: Click Point Specify height : 3

    Specify rotation angle of text : 0 Enter text: I love you Enter text: Enter

    53. Command: MTEXT (Draw Menu bars -> Text ->Multiline Text) eRbIsMrab;sresrcMnYnGkSreRcInCYr.

    Command: Mt MTEXT Current text style: "Standard" Text height: 3 Specify first corner: Click Point Specify opposite corner or [Height/Justify/Line spacing/Rotation/Style/ Width]: Click Point bnÞab;mkeyIg)an Text Window or Multiline Text dUcxageRkam³

    54. Command: Regen (View Menu bars -> Regen) eRbIsMrab;eFVIeGayrgVg;manragmUlnigBRgIkbRgÜm)an. Command: regen

    Regenerating model. 55. Command: EDIT (Modify menu bar -> Object ->Text)

    eRbIsMrab;EkERbGkSrnigbEnßmGkSr . Command: ddedit

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 46

    Select an annotation object or [Undo]: Click Object Command: ed Select an annotation object or [Undo]: Click Object

    cMNaM³ Double click a text object. enaHGacEkERb)an 56. Command: Chang eRbIsMrab;dUrlkçN³rbs; Object . eKGacdUrTisedA bnÞat; dUrTMhM;rgVg; dUrTisedA text . k> dUrTisedAbnÞat;tammMu

    Command: - ch CHANGE Select objects: Click Object Select objects: Right Click Specify change point or [Properties]: -30

    x> karbþÚrTMhMrgVg;

    Command: -ch CHANGE Select objects: Click Object Select objects: Right Click Specify change point or [Properties]: -20

    K> karbþÚr Text

    Command: -ch Select objects: Click Object Select objects: Right Click Specify change point or [Properties]: Click Point Enter new text style : Civil Specify new height :20 Specify new rotation angle : 45

    Enter new text : Enter

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 47

    K> karbþÚrepSg² Command: -ch

    CHANGE Select objects: Click Object Select objects: Right Click Specify change point or [Properties]: p Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness/Material/Annotative]: c New color [Truecolor/COlorbook] : red Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness/Material/Annotative]:

    57. Dimension Style: (Format Menu bars ->Dimension Style) (Dimension menu bar->style)

    eRbIsMrab;kMNt;TMrg;énkarvas;Evgrbs;rUb. Command: d

    DIMSTYLE

    - Set Current: sMrab;kMNt;GVIEdlkMBugeFVI

    - Modify: sMrab;eRCIerIsb¤dUrRbePT Dimension - Override: sMrab;EkGVIEdlkMBugeFVI - Compare: sMrab;eRbobeFobb¤emIleQ μaHEdleyIg)anbegáItenaHmanGVIxH.

    - New: sMrab;begáIteQ μaHfμ IkMueGayCan;KñanigmanRbePTxusKña.

    New Style Name sMrab;dak;eQμaH Use for Tak;TgeTAnig dimension EdleyIgcg;eRbI Start with CaeQñaHEdleyIgkMBugEteRbI Continue sMrab;bnþedIm,IeRCIserIsEdlmanrUbxageRkam.

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 48

    Line mantYnaTIsMrab;kMNt; B’NbnÞat; KMlat nig kMras; Color: sMrab;dUrB’N Dimension Line weight: sMrab;kMNt;kMras; Line type: sMrab;RbePTbnÞat; Baseline Spacing: sMrab;KMlat Dim line1: sMrab;biTr)aedk Dim line2: sMrab;biTr)aedk Ext line1: sMrab;biTr)aQr Ext line2: sMrab;biTr)aQr Extend beyond dim lines: sMrab;bnøÚtbegÁalsñwg Offset from origin: cMgayBIbegÁalcab;

    Symbols and Arrows mantYnaTIsMrab;kMNt; B’N k,alRBYj nig kMras;

    First: sMrab;eRCIserIsk,alRBYjTI1 Second: sMrab;eRCIserIsk,alRBYjTI2 Leader: sMrab;k,alRBYj Arrow Size: TMhMk,alRBYj

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 49

    Text: mantYnaTIsMrab;sresrGkSr Text style: dUrRbePTGkSrb¤ Font Text Color: sMrab;B’NGkSr Text height: sMrab;kMNt;kMBs;GkSr Vertical: sMrab;dak;GkSrtamG½kS (Y) Horizontal: sMrab;dak;GkSrtamG½kS (X) Offset from dim lines: sMrab;dkXøaGkSrBIr)a dimension

    Fit: sMrab;kMNt;TMhMGkSredaysV½yRbvtþi.

    Use Over all scale of 300 Primary units: mantYnaTIsMrab;kMNt;RbB½n§ /cMnYnKt;nigkMNt;epSg²eTot.

    Unit format: kMNt;eRCIserIsRbB½n§

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 50

    Precision: kMNt;CacMnYnKt;nigTsSn¾PaK Prefix: dak;elxBImux Suffix: dak;xageRkay Scale factor: kMNt;CaTMhM FM b¤tUceTAtamkarkMnt;.

    58. Command: Dimension Linear (Dimension menu bars ->Linear) eRbIsMrab;vas;RbEvgGgát;Rtg;.

    Command: dli DIMLINEAR Specify first extension line origin or : Click Object Specify second extension line origin: Click Object Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Click Point Dimension text = 100

    Command: dli

    DIMLINEAR Specify first extension line origin or : Select object to dimension: Click Object Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Click point Dimension text = 1000

    Command: dli DIMLINEAR Specify first extension line origin or : Click Object Specify second extension line origin: Click Object Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: m Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Click Point Dimension text = 100

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 51

    Command: dli DIMLINEAR Specify first extension line origin or : Click Object Select object to dimension: Click Object Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: a Specify angle of dimension text: 45 Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Click Point Dimension text = 100

    59. Command: Dimension Aligned (Dimension menu bars -> Aligned)

    eRbIsMrab;vas;Ggát;eRTtnigRsbrbs; Object. Command: dal

    DIMALIGNED Specify first extension line origin or : Click Object Specify second extension line origin: Click Object Specify dimension line location or [Mtext/Text/Angle]: Click Point Dimension text = 200

    Command: dal DIMLINEAR Specify first extension line origin or : Select object to dimension: Click Object Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Click point Dimension text = 1000

    Command: dli DIMLINEAR Specify first extension line origin or : Click Object Specify second extension line origin: Click Object Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: m Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Click Point

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 52

    Dimension text = 100

    Command: dli DIMLINEAR Specify first extension line origin or : Click Object Select object to dimension: Click Object Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: a Specify angle of dimension text: 45 Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Click Point Dimension text = 100

    60. Command: Arc Length (Dimension menu bars ->Arc Length)

    eRbIsMrab;vas;ExSekagnig Arc. Command: dar

    DIMARC Select arc or polyline arc segment: Click Arc Specify arc length dimension location, or [Mtext/Text/Angle/ Partial/Leader]: Click Point Dimension text = 405

    61. Command: Ordinate (Dimension menu bars -> Ordinate)

    eRbIsMrab;rkcMgaycMenalEkgrvagG½kS (x) nig G½kS (y) . Command: dor

    DIMORDINATE Specify feature location: endp of Specify leader endpoint or [Xdatum/Ydatum/Mtext/Text/Angle]: Dimension text = 30.0000

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 53

    62. Command: Dimension Radius (Dimension menu bars ->Radius)

    eRbIsMrab;vas;kaMrgVg;nigGgát;FñÚr. Command: dra

    DIMRADIUS Select arc or circle: Click Object Dimension text = 25 Specify dimension line location or [Mtext/Text/Angle]:

    Command: dra DIMRADIUS Select arc or circle: Click Object Dimension text = 200 Specify dimension line location or [Mtext/Text/Angle]: a Specify angle of dimension text: 60 Specify dimension line location or [Mtext/Text/Angle]: Click Point

    Command: dra

    DIMRADIUS Select arc or circle: Click Object Dimension text = 200 Specify dimension line location or [Mtext/Text/Angle]: m Specify dimension line location or [Mtext/Text/Angle]: Click Point

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 54

    63. Command: Jogged (Dimension menu bars ->jogged) eRbIsMrab;vas;kaMrgVg;EdlmanlkçN³Cam:Ud. Command: djo

    DIMJOGGED Select arc or circle: Click Object Specify center location override: Click Point Dimension text = 20 Specify dimension line location or [Mtext/Text/Angle]: Click Point Specify jog location: Click Point

    64. Command: Dim diameter (Dimension menu bars ->Diameter)

    eRbIsMrab;vas;Ggát;p©wtrgVg;. Command: ddi

    DIMDIAMETER Select arc or circle: Click Object Dimension text = 50.0000 Specify dimension line location or [Mtext/Text/Angle]: Click Point

    Command: ddi DIMDIAMETER Select arc or circle: Click Object Dimension text = 200 Specify dimension line location or [Mtext/Text/Angle]: m Specify dimension line location or [Mtext/Text/Angle]: Click Point

    Command: ddi DIMDIAMETER Select arc or circle: Click Object Dimension text = 200 Specify dimension line location or [Mtext/Text/Angle]: a Specify angle of dimension text: 45 Specify dimension line location or [Mtext/Text/Angle]: Click Point

    65. Command: Angular (Dimension menu bars ->Angular)

    eRbIsMrab;vas;mMunigFñÚr. Command: dan

    DIMANGULAR

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 55

    Select arc, circle, line, or : Click Object Select second line: Click Object Specify dimension arc line location or [Mtext/Text/Angle]: Click Point Dimension text = 45

    66. Command: Quick Dimension (Dimension menu bars -> Quick Dimension)

    eRbIsMrab;bþÚrTItaMg Dimension eTAtamtMrUvkar. Command: qdim

    Associative dimension priority = Endpoint Select geometry to dimension: 1Found Select geometry to dimension: Click Object Specify dimension line position, or [Continuous/Staggered/Baseline/Ordinate/Radius/Diameter/datumPoint/Edit/seTtings] : Click Point

    67. Command: Baseline (Dimension menu bars -> Baseline)

    eRbIsMrab;vas;bnþb:uEnþvamancMnuccab;epþImrYm. Command: dba

    Specify a second extension line origin or [Undo/ Select] : Click Point Dimension text = 15 Specify a second extension line origin or [Undo/ Select] : Click Point Dimension text = 400 Select base dimension:

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 56

    68. Command: Continue (Dimension menu bars -> Continue)

    eRbIsMrab;vas; Object bnþbnÞab;rhUtdl; Object cugeRkay. Command: dco

    DIMCONTINUE Specify a second extension line origin or [Undo/ Select] : Click Point Dimension text = 60 Specify a second extension line origin or [Undo/ Select] : Click Point Dimension text = 50 Specify a second extension line origin or [Undo/ Select] : Click Point Dimension text = 80 Specify a second extension line origin or [Undo/ Select] : Click Point Select continued dimension:

    69. Command: Dimension space (Dimension menu bars -> dimension space)

    eRbIsMrab;eGayRbEvgenAcenøaHb¤cMgayBIKña.

    k>karkMNt;Cak;lak; Command: dimspace

    Select base dimension: Click Object Select dimensions to space: Click Object Select dimensions to space: Click object Enter value or [Auto] : 100

    x>karkMNt;sV½yRbvtþn¾ Command: dimspace

    Select base dimension: Select dimensions to space: Click Object Select dimensions to space: Click object Enter value or [Auto] :

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 57

    70. Command: Dimension Break (Dimension menu bars -> Dimension Break)

    eRbIsMrab;pþac;ecjBI Dimension mUyeTA Dimension mYyeTot. k>karpþac;CasV½yRbvtþn¾

    Command: dimbreak Select a dimension or [Multiple]: Click Object No object selected. Select a dimension or [Multiple]: Click Object Select object to break dimension or [Auto/Restore/ Manual] :

    x>karRtlb;eRkay Command: dimbreak

    Select dimension to add/remove break or [Multiple]: m Select dimensions: Specify opposite corner: 2 found Select dimensions: Click Object Select object to break dimensions or [Auto/Remove] : r 1 object modified

    K>karkat;tamkMNt; Command: dimbreak Select dimension to add/remove break or [Multiple]: Click Object Select object to break dimension or [Auto/Manual/ Remove] : m Specify first break point: Click Point Specify second break point: Click Point 1 object modified

    71. Command: Tolerance (Dimension menu bars ->Tolerance)

    eRbIsMrab;;cMNaMGVImYyenAelI Object . Command: tolerance

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 58

    72. Command: Center Mark (Dimension menu bars -> Mark)

    eRbIsMrab;rkcMnucp©wtrgVg;. Command: dce

    DIMCENTER Select arc or circle: Click Object

    73. Command: Inspection (Dimension menu bars -> Inspection)

    eRbIsMrab;dak;m:Udb¤cMNaMGVImYy. Command: diminspect

    Select dimensions: 1 found Select dimensions: Click Object

    74. Command: Jogged linear (Dimension menu bars -> jogged linear)

    eRbIsMrab;dak;m:Ud Dimension Command: dimjogline

    Select dimension to add jog or [Remove]: Click Object Specify jog location (or press ENTER):

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 59

    75. Command: Dimension Edit (Dimension menu bars ->Dimension Edit)

    eRbIsMrab;Ek Code Dimension rbs; Object . k> karbþÚrelx Code fμ I

    Command: dimedit Enter type of dimension editing [Home/New/Rotate/Oblique] : N Select objects: Click Object Select objects:

    x> karRtlb;mkedImvij

    Command: dimedit Enter type of dimension editing [Home/New/Rotate /Oblique] : h Select objects: Click Object Select objects:

    K> karbgVil Command: dimedit

    Enter type of dimension editing [Home/New/Rotate/ Oblique] : r Specify angle for dimension text: 60 Select objects: Click Object Select objects: Right Click

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 60

    X> karbgVilr)ar Command: dimedit

    Enter type of dimension editing [Home/New/Rotate/Oblique] : o Select objects: Click Object Select objects: Right Click Enter obliquing angle (press ENTER for none): 45

    76. Command: Dimension Text Edit (Dimension menu bars ->Dimension Text Edit)

    eRbIsMrab;EkERbGkSrrbs; Dimension . k> karbþÚrelx Code xageqVg

    Command: dimtedit Select dimension: Click Object Specify new location for dimension text or [Left/Right/ Center/ Home/Angle]: L

    x> karbþÚrelx Code xagsþaM

    Command: dimtedit Select dimension: Click Object Specify new location for dimension text or [Left/Right/Center/ Home/Angle]: R

    K> karbþÚrelx Code kNþal

    Command: dimtedit Select dimension: Click Object Specify new location for dimension text or [Left/Right/Center/ Home/Angle]: C

    X> karbþÚrelx Code CamMu

    Command: dimtedit Select dimension: Click Object Specify new location for dimension text or [Left/Right/Center/ Home/Angle]: a Specify angle for dimension text: 45

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 61

    g> karbþÚrelxRtlb;mkedImvij

    Command: dimtedit Select dimension: Click Object Specify new location for dimension text or [Left/Right/Center/ Home/Angle]: h

    77. Command: Xref (Insert Menu bars -> Xrf Manger)

    eRbIsMrab;naMrUbBI File epSg²cUleTAkñúg File EdleyIgkMBugKUr. Command: xref

    • Attach sMrab;Tajyk File mk • Detach dk File ecjvijBI Attach • Unload sMrab;dkrUbecjEteQ μaH File • Reload sMrab; Load ecjBI Unload Etb:ueNÑaH. • Bind sMrab;P¢ab;rUbEdleyIg)anbBa©ÚleTAkñúg File .

    78. Command: Image (Insert Menu bars -> Image Manger) eRbIsMrab;bB¢aÚlrUbfteTAkñúgKMnUrrbs;eyIg. Command: _image

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 62

    • Attach sMrab;Tajyk File mk • Detach dk File ecjvijBI Attach • Unload sMrab;dkrUbecjEteQ μaH File enAdEdl. • Reload sMrab; Load ecjBI Unload Etb:ueNÑaH. • Bind sMrab;P¢ab;rUbEdleyIg)asnbBa©ÚleTAkñúg File .

    79> Command: Draw order (Tools menu bars -> Draw order) eRbIsMrab;bBa¢ÚnnigRtlb; Object k>bBa©ÚneTAeRkay

    Command: draworder Select objects: Click Object Select objects: Right Click Enter object ordering option [Above objects/Under objects/ Front/ Back] : B

    80> Command: Edit hatch (Modify -> Object->Edit hatch) eRbIsMrab;Ekb¤pøas;bþÚr hatch . Command: hatchedit

    Select hatch object: Click Object

    81> Command: Edit Polyline (Modify -> Object->Poly line) eRbIsMrab;Ekb¤pøas;bþÚr Polyline nig line . Command: pedit

    PEDIT Select polyline or [Multiple]: Click Object

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 63

    Enter an option [Close/Join/Width/Edit vertex/Fit/Spline/Decurve/ Ltype gen/Undo]: s Enter an option [Close/Join/Width/Edit vertex/Fit/Spline/Decurve /Ltype gen/Undo]:

    ` Command: pedit

    Select polyline or [Multiple]: m Select objects: Click Object Specify opposite corner: 4 found Select objects: Right Click Convert Lines and Arcs to polylines [Yes/No]? Enter an option [Close/Open/Join/Width/Fit/Spline/Decurve/Ltype gen/Undo]: J Join Type = Extend Enter fuzz distance or [Jointype] : 3 segments added to polyline Enter an option [Close/Open/Join/Width/Fit/Spline/Decurve/Ltype gen/Undo]:

    82> Command: Edit Spline (Modify -> Object->Spline) eRbIsMrab;Ekb¤pøas;bþÚr Poly line . Command: Splinedit

    Select spline: Enter an option [Fit data/Close/Move vertex/Refine/rEverse/Undo]: F Enter a fit data option [Add/Close/Delete/Move/Purge/Tangents/toLerance/eXit] : X Enter an option [Fit data/Close/Move vertex/Refine/rEverse/Undo]:

    83> Command: pedit eRbIsMrab;Ekb¤pøas;bþÚr object. Command: pe PEDIT Select polyline or [Multiple]: m Select objects: Click Object Select objects: Right Click Enter an option [Close/Open/Join/Width/Fit/Spline/Decurve/ Ltype gen/Undo]: w Specify new width for all segments: 10 Enter an option [Close/Open/Join/Width/Fit/Spline/Decurve/Ltype gen/Undo]:

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 64

    84> Command: Layer (Format menu bars->Layer) eRbIsMrab;kMNt;RbePTbnÞat; BN’ kMras; cak;esarniglak; Object.

    Command: Layer

    - New Property Filter eRbIsMrab;bgðajeQ μaH Filter fμ I

    - New Group Filter eRbIsMrab;begáIteQ μaH Group fμ I - New Layer eRbIsMrab;begáIteQ μaH Layer fμ I

    - Delete eRbIsMrab;lubeQ μaH Layer ecal

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 65

    - Set Current: eRbIsMrab; Select Layer EdlkMBugeFVIkar

    - Name: eRbIsMrab;dak;eQ μaH - On: eRbIsMrab;biTnigebIk - Lock: eRbIsMrab;cak;esar - Color: eRbIsMrab;dak;B’N - Line Type: eRbIsMrab;dak;RbePTbnÞat; - Line Weight: eRbIsMrab;dak;kMras;bnÞat;

    85> Command: Layoff eRbIsMrab;lak;biT Object . Command: layoff

    Current settings: Viewports=Off, Block nesting level=Block Select an object on the layer to be turned off or [Settings/ Undo]: Click Object Layer "Wall" is current, do you want to turn it off? [Yes/No] : Y Layer "Wall" has been turned off. Select an object on the layer to be turned off or [Settings/Undo]:

    86> Command: Layon eRbIsMrab;ebIk Object .

    Command: layon Warning: layer "Layer1" is frozen. Will not display until thawed. All layers have been turned on.

    87> Command: Layout (Insert menu bars -> Layout) eRbIsMrab;begáItTMrg;RkdasnigerobcMkic©karbBa©ab;. k>karbegáIt Layout

    Command: layout Enter layout option [Copy/Delete/New/Template/Rename/ SAveas /Set/?] : n Enter new Layout name : khin

    x>karlub Layout Command: layout

    Enter layout option [Copy/Delete/New/Template/Rename/SAveas/ Set/?] : d Enter name of layout to delete : khin Layout "khin" deleted.

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 66

    K>karftcMlg Layout Command: LAYOUT

    Enter layout option [Copy/Delete/New/Template/Rename/SAveas / Set/?] : c Enter name of layout to copy : Enter layout name for copy : Norton Layout "khin" copied to "norton".

    X>karbþÚreQ μaH Layout Command: LAYOUT

    Enter layout option [Copy/Delete/New/Template/Rename/SAveas/ Set/?] : r Enter layout to rename : Enter new layout name: nu Layout "khin" renamed to "nu".

    g>karrkSaTuk Layout Command: LAYOUT

    Enter layout option [Copy/Delete/New/Template/Rename/SAveas/ Set/?] : sa Enter layout to save to template :

    88> Command: Print (Files menu bars -> Layout) eRbIsMrab;e)aHBum

  • EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 67

    Printer/Plotter

    Name: karbgðajma:kma:sIune)aHBum< Properties: sMrab;kMNt;TMhMRkdas

    Paper Size: eRbIsMrab;kMNt;TMhMRkdas

    What to Plot: eRbIsMrab;kMNt;cMnuccab;rbs;épÞ Print

    Center the Plot: eRbIsMrab;kMNt;cMnuckNþalénépÞ Print Preview…: eRbIsMrab;emIlTMrg; Print Plot Style Table: eRbIsMrab;eRCIserIs monochrome.ctb Ok :