Trabajo Encargado de Programas de Mecanica de Rocas
-
Upload
bam-bam-d-montalvan-diaz -
Category
Documents
-
view
221 -
download
1
description
Transcript of Trabajo Encargado de Programas de Mecanica de Rocas
PSICOSEXUALIDAD
UNJBG-FIAG-ESGEPROGRAMAS USADOS EN MECNICA DE ROCAS
UNIVERSIDAD NACIONAL JORGE BASADRE GROHMANNFACULTAD DE INGENIERA CIVIL, ARQUITECTURA Y GEOTECNIAESCUELA ACADMICO PROFESIONAL DE INGENIERA GEOLGICA-GEOTECNIA
USO DE PROGRAMAS PARA MECNICA DE ROCAS
TACNA PER2014
MECNICA DE ROCAS
PROGRAMAS USADOS EN MECNICA DE ROCAS
I. PROGRAMA ROCKLABPROBLEMA:En una Mina Tajo Abierto se tiene problemas con la estabilidad de taludes por lo que se enva a laboratorio de Mecnica de Rocas Muestras para el ensayo Triaxial. El ensayo arroj los siguientes resultados: ( GRUPO 01) 3 17.1623 23.42701.1235 85.255010.3142 244.96317.6510 270.51250.2230 360.763110.5630 501.022 Roca : Granito Densidad 3,2 kg/cc Aplicar el Programa Rock Lab. Para su desarrollo
SOLUCIN:
PASO 1: Le damos nombre al proyecto que se va a trabajar
PASO 2: ingresamos los datos del problema, es decir, esfuerzo1 y esfuerzo3
PASO 3: Se especifica el tipo de roca
PASO 4: De acuerdo a la roca especificamos el valor de MRM
PASO 5: Una vez ingresado los datos el programa ejecutamos para ver los resultados, las cuales son el Angulo de friccin y la cohesin de la roca.
RESULTADOS:La cohesin resulta 5MPa y el Angulo de friccin resulta 37.
II. PROGRAMA PHASE
externa
III. PROGRAMA ROCKPLANE
DATOS DEL PROBLEMADATOS DEL PROBLEMA
altura30M
Angulo del talud65
Angulo de plano de falla25
coeficiente de sismicidad 0.08
peso especfico unitario2.5t/m3
peso especfico de agua1t/m3
cohesin de la roca3t/m3
Angulo de friccin35
cresta4M
PASO 1: le damos el nombre al trabajo
PASO 2: Cambiamos el color del bloque de deslizamiento y para su plano de falla.
PASO 3: Ingresamos los datos de la geometra del talud
PASO 4: especificamos la ecuacin con el que se va a trabajar, en el caso se us la ecuacin de MORH COULOMB
PASO 5: Introducimos los datos de los efectos que provoca el agua y el coeficiente de sismicidad.
PASO 6: Ejecutamos el programa.
RESULTADOSEl factor de seguridad resulto 0.99, este valor nos indica que es inestable.
PASO 7: Reducimos el ngulo del talud y tambin disminuimos el porcentaje de agua presente.
RESULTADOS:Reduciendo el ngulo y efectos de agua, se observa que el factor de seguridad aumento a 1.57ROCPLANE ANALYSIS INFORMATION Document Name: rocplan(REGGIE) Job Title: REGGIE KATLEEN FLORES TITO Analysis Results: Analysis type = Deterministic Normal Force = 629.589 t/m Resisting Force = 715.393 t/m Driving Force = 453.257 t/m Factor of Safety = 1.57834 Geometry: Slope Height= 45 m Wedge Weight= 936.844 t/m Wedge Volume= 374.738 m^3/m Rock Unit Weight = 2.5 t/m^3 Slope Angle = 30 Failure Plane Angle = 25 Upper Face Angle = 0 Bench Width : Not Present Waviness = 0 Intersection Point (B) of slope and upper face = ( 77.9423 , 45 ) Intersection point (C) of tension crack and upper face = ( 82.9423 , 45 ) Intersection point (D) of failure plane and tension crack = ( 82.9423 , 38.6766 ) Slope length ( Origin --> B ) = 89.8876 m Tension Crack Length ( C --> D ) = 6.32338 m Failure Plane length ( Origin --> D ) = 91.5167 m Tension Crack : present Tension Crack Angle = 90 Distance From Crest = 5 m Tension Crack Length = 6.32338 m Strength: Shear Strength Model : Mohr-Coulomb Friction Angle = 35 Cohesion = 3 t/m^2 Shear Strength: 715.393 t/m^2 Water Pressure: Water Unit Weight = 1 t/m^3 Pressure Distribution Model : Peak Pressure - Mid Height Percent Filled : 40 % Water Force on Failure Plane = 191.662 t/m Water Force on Tension Crack Plane = 0 t/m Seismic Force: Direction : Horizontal Seismic Coefficient : 0.08 Seismic Force : 74.9475 t/m External Forces : Not Present Bolt Force Resultant Active Bolt Force = 11.276 t/m Active Bolt Angle = -5 Resultant Passive Bolt Force = 0 t/m #1 Bolt Capacity = 11.276 tonnes, Angle = -5 , length = 10 m, Anchored Length = 2.31979 m, Active type
IV. PROGRAMA DIPS
PASO 1: Le damos nombre al proyecto e ingresamos los 303 datos.
PASO 2: Ploteo de polos
PASO 3: Diagrama de contornos
PASO 4: Adherimos los planos mayores
PASO 5: Diagrama de rosetas
Dips Document Information Document Name: mecanica de rocas-REGGIE Document Title: REGGIE KATHLEEN FLORES TITO Document Setup: Traverses: 0 Data is DIP/DIPDIRECTION format Magnetic Declination (W pos): 0 degrees Multiple Data Flag (Quantity) is OFF 0 Extra Data Columns 303 Poles from 303 Entries Global Mean Vector: Unweighted TREND/PLUNGE = 220/75 Weighted TREND/PLUNGE = 220/75 Unweighted DIP/DIPDIRECTION = 15/40 Weighted DIP/DIPDIRECTION = 15/40 Added Planes (via Add Plane Option): ID TREND/PLUNGE DIP/DIPDIRECTION LABEL 1 142/19 71/322 poloM1 2 263/17 73/83 poloM2 3 226/52 38/46 talud
5.- PROGRAMA SWEDGEPASO 1: Asi como en los programas anteriores le damos el nombre al proyecto y especificamos el sistema de unidades con el que se va a trabajar.
PASO 2: cambiamos los colores para cada bloque.
6.- PROGRAMA SLIDE
DATOS DEL PROBLEMA
MATERIALCOHESION (KN/m3)FRICCION ()DENSIDAD (kN/m3)
ROCA GRANODIORITA03819.5
CALIZA5.32319.5
DIORITA7.22019.5
COORDENADAS
XY
2020
7020
7035
5035
3025
2025
SEPARACION DE CAPAS
XY
3025
4027
5224
7024
7031
5431
5029
4027
PASO 1: Le damos el nombre al proyecto
PASO 2: Activamos la regilla con la opcion GRID con separacion cada 2 metros.
PASO 3: Ingreamos las coordenadas para la geometria del talud
PASO 4: Ingresamos las coordenadas que separa cada estrato.
PASO 5: Definimos los limites de de la zona de analisis.
PASO 6: Insertamos los datos del primer estrato.
PASO 7: Datos del segundo estrato.
PASO 8: Datos del tercer estrato.
RESULTADO: Resultado por el metodo de bishoop Fs=1.304
Resultado por el mtodo de SPENCER Fs= 1.3
Resultado por el mtodo de GL FS=1.3
Resultado por el mtodo de JAMBU.
Slide Analysis Information Document Name File Name: slideresult Project Settings Project Title: REGGIE KATHLEEN FLORES Failure Direction: Right to Left Units of Measurement: SI Units Pore Fluid Unit Weight: 9.81 kN/m3 Groundwater Method: Water Surfaces Data Output: Standard Calculate Excess Pore Pressure: Off Allow Ru with Water Surfaces or Grids: Off Random Numbers: Pseudo-random Seed Random Number Seed: 10116 Random Number Generation Method: Park and Miller v.3 Analysis Methods Analysis Methods used: Bishop simplified GLE/Morgenstern-Price with interslice force function: Half Sine Janbu corrected Spencer Number of slices: 25 Tolerance: 0.005 Maximum number of iterations: 50 Surface Options Surface Type: Circular Radius increment: 10 Minimum Elevation: Not Defined Composite Surfaces: Disabled Reverse Curvature: Create Tension Crack Material Properties Material: ROCA GRANODIORITA Strength Type: Mohr-Coulomb Unit Weight: 19.5 kN/m3 Cohesion: 0 kPa Friction Angle: 38 degrees Water Surface: None Material: ROCA CALIZA Strength Type: Mohr-Coulomb Unit Weight: 19.5 kN/m3 Cohesion: 5.3 kPa Friction Angle: 23 degrees Water Surface: None Material: ROCA DIORITA Strength Type: Mohr-Coulomb Unit Weight: 19.5 kN/m3 Cohesion: 7.2 kPa Friction Angle: 20 degrees Water Surface: None Global Minimums Method: bishop simplified FS: 1.304400 Center: 32.273, 51.285 Radius: 25.313 Left Slip Surface Endpoint: 31.948, 25.974 Right Slip Surface Endpoint: 51.653, 35.000 Resisting Moment=11295 kN-m Driving Moment=8659.13 kN-m Method: janbu corrected FS: 1.307080 Center: 34.234, 48.344 Radius: 22.045 Left Slip Surface Endpoint: 32.704, 26.352 Right Slip Surface Endpoint: 51.782, 35.000 Resisting Horizontal Force=425.314 kN Driving Horizontal Force=325.392 kN Method: spencer FS: 1.299920 Center: 32.273, 51.285 Radius: 25.313 Left Slip Surface Endpoint: 31.948, 25.974 Right Slip Surface Endpoint: 51.653, 35.000 Resisting Moment=11256.2 kN-m Driving Moment=8659.13 kN-m Resisting Horizontal Force=397.501 kN Driving Horizontal Force=305.79 kN Method: gle/morgenstern-price FS: 1.300260 Center: 32.273, 51.285 Radius: 25.313 Left Slip Surface Endpoint: 31.948, 25.974 Right Slip Surface Endpoint: 51.653, 35.000 Resisting Moment=11259.2 kN-m Driving Moment=8659.13 kN-m Resisting Horizontal Force=397.541 kN Driving Horizontal Force=305.739 kN Valid / Invalid Surfaces Method: bishop simplified Number of Valid Surfaces: 15163 Number of Invalid Surfaces: 3328 Error Codes: Error Code -103 reported for 81 surfaces Error Code -108 reported for 387 surfaces Error Code -1000 reported for 2860 surfaces Method: janbu corrected Number of Valid Surfaces: 15035 Number of Invalid Surfaces: 3456 Error Codes: Error Code -103 reported for 81 surfaces Error Code -108 reported for 515 surfaces Error Code -1000 reported for 2860 surfaces Method: spencer Number of Valid Surfaces: 14995 Number of Invalid Surfaces: 3496 Error Codes: Error Code -103 reported for 81 surfaces Error Code -108 reported for 515 surfaces Error Code -111 reported for 40 surfaces Error Code -1000 reported for 2860 surfaces Method: gle/morgenstern-price Number of Valid Surfaces: 15035 Number of Invalid Surfaces: 3456 Error Codes: Error Code -103 reported for 81 surfaces Error Code -108 reported for 515 surfaces Error Code -1000 reported for 2860 surfaces Error Codes The following errors were encountered during the computation: -103 = Two surface / slope intersections, but one or more surface / nonslope external polygon intersections lie between them. This usually occurs when the slip surface extends past the bottom of the soil region, but may also occur on a benched slope model with two sets of Slope Limits. -108 = Total driving moment or total driving force < 0.1. This is to limit the calculation of extremely high safety factors if the driving force is very small (0.1 is an arbitrary number). -111 = safety factor equation did not converge -1000 = No valid slip surfaces are generated at a grid center. Unable to draw a surface.
MECNICA DE ROCAS41