Tecmax Cap 6 Ingles

8/9/2019 Tecmax Cap 6 Ingles

http://slidepdf.com/reader/full/tecmax-cap-6-ingles 1/37

STANDARD WIRING

MEMBERS

LAURA CRISTINA CASTAÑOLAURA CRISTINA CASTAÑONATALIA MORALESNATALIA MORALES

DIANA CRISTINA PERAFAN ARIASDIANA CRISTINA PERAFAN ARIAS

Services & MANAGEMENT CENTER EMRESARIAL

Chapter 6



Introduction



Introduction to wiring standards and codes

The codes are created to protect the person using it

Capitulo 6Capitulo 6



Structured Cable System (SCS)



Some of the organizations on global

standards are:



Evolution of cabling standards

Initially the standards were dominated by

manufacturers



The ISO did research and created a network

model called seven layer OSI model, designed toprovide a set of standards to

ensure compatibility

and interoperability

between different

technologies.



National Standards, International

Standards and Local Standards



THE ISOThe ISO is the International Organization for

Standardization.

It is a nongovernmental organization that

promotes the development of standards andeverything to do with this.

ISO has a number of important

computer standards, the most

important of these is the OSI model



IECInternational Electrotechnical Committee.

Is the global organization that prepares and

publishes international standards for alltechnologies of electricity, electronics and

those related



The ANSI

The American National Standardization Institute,

is a private non-profit organization that

administers and coordinates the evaluation

system of voluntary standardization and

conformity of the United States.



EL IEEE

The IEEE is a technical professional association,

non-profit, organization includes engineers,scientists and students.

His most widely recognized standard is 802.



IEEE 802.1

Bridging and

management

standards for LAN

/ MAN bridging

and media access

control.



IEEE 802.2 Standards for

Logical Link

Control (LLC) for

connectivitystandards



The IEEE 802.3 Standard (Ethernet)

This standard describes the series of digital bits

that travel through the cable. IEEE 802.3 and

its variants obtained using the cable to

compete for it. This system is called multiple

access with carrier sense and collision

detection



CSMA/CD



IEEE 802.4Standard access method for transmitting bus

signals



IEEE 802.5

Standards

method

Network

Access

ring

LAN / MAN



IEEE 802.6Standards for information exchange between

systems



IEEE 802.7

Standards for

Broadband LAN

wiring



IEEE 802.8

Standards for fiber

optic technology



IEEE 802.9

Standards for

integrated

services such as

voice and data



IEEE 802.10

Standards for

security

implementatio

ns in LAN /

MAN



IEEE 802.11 (WiFi)

IEEE 802.11 or Wi-Fi is a standard

communication protocol of the IEEE that

defines the use of the two lowest levels of the

OSI architecture (physical layer and data link),

specifying its rules of operation in a WLAN.



IEEE 802.11 (WiFi)



IEEE 802.12

Standards for access method Priority demands



IEEE 802.14

Standards for local area

networks and

metropolitan areas, as

the method of access

to cable broadband



IEEE 802.15

Standards for personal area networks (WPAN)



IEEE 802.16

Standards for broadband fixed wireless.



EIA TIA

The Electronic Industries Association and the

Association of Telecommunications Industry

are trade associations that develop and

publish a set of standards boards covering the

structured cabling for voice and data LAN.



Other Organizations

There are many other organizations havedeveloped international standards that arethen adopted by others.



Do should consider installers

telecommunications cables on electricity?

Because it is so dangerous, electricity is a major

concern for government agencies in charge of

codes and safety measures.



thanks

Tecmax Cap 6 Ingles

Documents

Transcript of Tecmax Cap 6 Ingles