Osaki Pro Maestro

Instruction Manual

……………………..……..........................................

………………………………………..……....................................................

……………………..…….......................................................................................

……………………..……..............................................................................

…………………..…….................................................

……………………..……........................................................................

……………………..……............................................................................

……………………..……...............................................

……………………..…….................................................................................................

……………………..……........................................................................

……………………..……................................................................................

4

9

11

16

20

22

28

29

30

31

33

110V, 60Hz

Do not put hands or feet between footrest and seat base.Do not put hands or feet between footrest and side panel.Do not put hands or feet between seat base and side panel.Do not put hands or feet between upper and lower part of the footrest.Do not put hands or feet in the gap of seat base.Do not put pets on the massage chair.Do not pull out the power plug or turn OFF the power switch suddenly during massage.otherwise injuries may happen.

Pillow Shoulder

Bluetooth Speaker

Armrest

LED

LED

Controller

Side Panel

Footrest

Back Cushion

Seat Pad

Side PanelController

2 Air bags

12 Air bags

6 Air bags

Assembly

Power Line x1

Seat base and backrest Footrest

Left side panel Right side panel

Allen key x1 Circlip x2Hex screws x10 Washer x10Back up Hex screws X2

Washer X2

Remove the packing, take out the parts.

Remove side panel cover by slightly pulling the cloth strip.

Connect the footrest data line and air hose.

then with the buckle.

Install the footrest.

Connect the data line and air hose.

Use four screws to the side panel.

A

B

Install the side panel.

Align A on the armrest with B on the

P the edge with your hand to the panel cover back to the

.

Pull the two zippers on the seat pad.

Fix the waist cushion on the backrest with the elastic belt.

Tidy the cushions.

4.7”79.5”

25”

63”x31.5”

Before use

Do not put hands or feet between footrest and seat base.Do not put hands or feet between footrest and side panel.Do not put hands or feet between seat base and side panel.Do not put hands or feet between upper and lower part of the footrest.Do not put hands or feet in the gap of seat base.otherwise injuries may happen.

1. Power switch on the top of controllerON /OFF buttonPress this button to start massage chair.Touch any massage function icon to startmassage.Press this button again to turn off the massage chair, massage chair will return toits original possition.

2. Touch screenThere are 6 functions in the middle of the screen for user to select.Setting is on the top right corner.

The controller instructions

Power switch on the top of controller

ON /OFF button

Touch screen

The touch keysAUTO

AUTO

3. The touch keys

Position:User can adjust backrest/footrest incline/recline by touching the icon . when the desire position reach , touch the icon again to stop the adjustment.TheZ-G: Touch this icon to active the Zero gravity position,press the button again to return toidle position.Touch LED icon can controll the logo lamp on the shoulder.

Note: Z-G icon is NOT controllable in the massage programs with angle adjustment.

Position: Once this key is touched the screen will changeto the Position ,

Main page: when star the chair, touch this key

Reset Once this key is touched,massage chair will return to itsoriginal possitionmassage function continue .

AUTO: Once this key is touched,the massage chair will star thedemo auto program and thescreen will change to massagepage.

1. Neck & ShoulderTouch this icon the screen will change to the page [Neck & Shoulder]There are 4 auto massage programs, if 1 of 4 auto program is activated chair willautomatically perform a shoulder hight scan. The screen will [Shoulder scanning]The roller will go to shoulder adjustment automatically user can manually adjust theshoulder hight position

.

Operation guide

2. Lower backTouch this icon the screen will change to the page [Lower back] There are 4 auto massage programs 1 of 4 auto program

3. AutoTouch this icon the screen will change to the [Auto] .There are 8 auto massage programs 1 of 8 auto program

NOTE:4D Intensity:

There are 8 different levels available for adjustment to suit variousmassage strength.In the auto mode

.Air Intensity

There are 5 different levels available for adjustment.Massage speed:

There are 5 different levels

4. ManualTouch this icon the screen will change to the [Manual] .There are 4 programs for different massage .User can select the program preferred then the auto program start.

NOTE:4D Intensity:There are 8 different levels In manual mode

Intensity / strength / speed:There are 5 different levels for adjustment.Upward / downward:

Roller width:The width for tapping, shiatsurolling.Spot:The spot massage allow user to select spot for any part on theback. Touch the icon once to activate pot massage at thelocation. Touch again to stop the function.Partial:The partial massage allow user to select .Touch the icon once to activate partial ouch again to stopthe function.

5. Advancethe screen will change to the [Advance]

. There are 4 advance programs .User can select the program preferred then the program start.

NOTE: Heating: will automatic activate in auto program. Touch this icon to turn off the roller heat. Touch again to activate it. Air: To airbag massage program on the arm and waist

Calf kneading: Foot kneading:

6. Air massageTouch ico the screen will change to the [Airmassage] . There are 4 programs

. There are 5 different levels airIntensity available for adjustment.

7. SettingTouch icon on the top right corner the screen will change to the[Setting] . User can select language / volume / screen sleep / screen brightnessin this page.

Control Buttons on the side panel

AUTO Z-G4D

4D

Power: ON /OFF button

USB mobile phone charger

Auto: A key to start demo auto program

Z-G: A key to start Zero gravity position

4D +/- : 4D Intensity adjustment

Pause: Massage function stop/start button

After massage

Turn off the power switch on the controller.

Pull the power switch to the position.

Pull out the power plug.

After us pu the power switch to the OFF position and pull out thepower plug;

Model

Rate Voltage

Power

Working time

Guide

Osaki Pro Maestro

110 -120V 60Hz

250W

15min

L Shape 52.8"

4DMassageRoller

Airbag

Angle Adjustment

size

Extension of Footrest Approx 7.1"

BOX1 56.5"*29.4"*39.0"

BOX2 41.8"*13.8"*29.2"

BOX3 22.9"*19.7"*20.9"

BOX1 163/190 lbs

BOX2 35.3/46.3 lbs

BOX3 46.3/52.9 lbs

Dimensions of PackingL*W*H

N.W./ G.W.

Weight of Chair Approx 244.6 lbs

264.6 lbsMaximum bodyweight of user

Forward distance

Strength

Speed

8 level Approx 3.9"

5 level

5 level

Intensity 5 level

Backrest

Footrest

Approx 128°- 155° (Ground Angle)

Approx 9°- 75° Wall Angle

Power OFF

Power ON

61.1"x31.9"x48.1"

79.5"x31.9"x46.9"