Modelo 4030hcu

download Modelo 4030hcu

of 5

Transcript of Modelo 4030hcu

  • 8/12/2019 Modelo 4030hcu

    1/5

    www.cranepumps.com

    SECTION

    PAGE

    DATEUSA: (937) 778-8947 Canada: (905) 457-6223 International: (937) 615-3598A Crane Co. Company

    End Suction Centrifugal Pum

    5

    5B

    Model 4030HCUniversal D

    Model: 4030HCU

    DESCRIPTION:

    THESE PUMPS ARE SUITABLE FOR

    GENERAL INDUSTRIAL USE SUCH AS LIQU

    TRANSFER OR AS BOOSTER PUMPS.

    Specifications:

    SUCTION/DISCHARGE ...............4" (102mm) Suction,

    3" (76mm) 125 lb Flange Discharge. Discharge can be placed in 8 different

    locations depending on piping requirements.

    LIQUID TEMPERATURE .............180F (82C) Continuous

    BODY ..........................................Cast Iron ASTM, Class 30, with Air Vent,

    Vacuum Pressure and Drain Plugs

    PEDESTAL ...................................Cast Iron ASTM, Class 30

    IMPELLER: Design ....................Enclosed Type, Dynamically Balanced,

    ISO G6.3

    Material ..................Cast Iron ASTM, Class 30

    WEAR RING................................. Bronze

    SHAFT.......................................... Steel

    SHAFT SLEEVE ..........................Bronze

    HARDWARE ................................Steel

    PAINT ..........................................Air Dry EnamelSEAL: Design....................Single Mechanical

    Lubrication..............Self Lubrication

    Material...................Rotating Faces - Carbon

    Stationary Faces - Ni-Resist

    Elastomer - Buna-N

    Hardware -300 Series Stainless

    BEARING-PUMP END:

    Design....................Single Row, Ball

    Lubrication..............Grease, Factory

    Load ....................... Radial & Thrust

    BEARING-DRIVE END:

    Design....................Double Row, Ball,

    Lubrication..............Grease, Factory

    Load........................Radial & Thrust

    OPTIONAL EQUIPMENT .............Discharge Check Valve, Hand Primer,

    Base & OSHA Coupling Guard,

    Flex Coupling, Strainer, Bronze Impeller,

    Companion Flange, Flange Gasket

    4/09

    I&O Manual

  • 8/12/2019 Modelo 4030hcu

    2/5

    www.cranepumps.com

    SECTION

    PAGE

    DATE

    End Suction Centrifugal Pumps

    USA: (937) 778-8947 Canada: (905) 457-6223 International: (937) 615-3598A Crane Co. Company

    6

    5B

    MODEL NO PART NO WEIGHT

    LBS. (kg)

    4030HCU 059459 254 (115.2)

    inches

    (mm)

    Model 4030HCUUniversal Drive

    IMPORTANT !1.) DO NOT USE FOR PUMPING FLUIDS WITH A FLASH POINT OF LESS THAN 100F.2.) MAKE CERTAIN THAT PUMP AND/OR MOTOR ASSEMBLY AND CONTROLS HAVE THE APPROPRIATE RATINGS FOR THE GIVEN APPLICATION

    AREA CLASSIFICATION. (ie DIVISION I, AGENCY LISTING ETC.)

    1/06

    I&O Manual

  • 8/12/2019 Modelo 4030hcu

    3/5

    SECTION

    PAGE

    DATEUSA: (937) 778-8947 Canada: (905) 457-6223 International: (937) 615-3598A Crane Co. Company

    7

    5B

    www.cranepumps.com

    End Suction Centrifugal Pum

    inc

    (m

    Testing is performed with water, specific gravity 1.0 @ 68F @ (20C), other fluids may vary performan

    Model 4030HCPerformance Cu

    Universal Drive, Various R

    4/05

    I&O Manual

  • 8/12/2019 Modelo 4030hcu

    4/5

    SECTION

    PAGE

    DATE

    8

    5B

    USA: (937) 778-8947 Canada: (905) 457-6223 International: (937) 615-3598A Crane Co. Company

    www.cranepumps.com

    End Suction Centrifugal Pumps

    Model 4030HCUPerformance Curve

    Universal Drive, Various Impeller Diameters, 3500 RPM

    inches

    (mm)

    Testing is performed with water, specific gravity 1.0 @ 68F @ (20C), other fluids may vary performance

    4/05

    I&O Manual

  • 8/12/2019 Modelo 4030hcu

    5/5

    SECTION

    PAGE

    DATEUSA: (937) 778-8947 Canada: (905) 457-6223 International: (937) 615-3598A Crane Co. Company

    9

    5B

    www.cranepumps.com

    End Suction Centrifugal Pum

    inc

    (m

    Testing is performed with water, specific gravity 1.0 @ 68F @ (20C), other fluids may vary performan

    Model 4030HCPerformance Cu

    Universal Drive, Various Impeller Diameters, 1750 R

    4/05

    I&O Manual