ANALIZADORES DE RED - sebatelec.com€¦ · DKM-409S CARACTERISTICAS: Mediciones RMS verdaderas...

PRODUCTO TURCO 2019

DKM-405

CARACTERISTICAS: Mediciones RMS verdaderas

Pantalla de distorsión armónica total

Salida de relé configurable

Capacidad de salida de impulsos de energía.

Contadores de potencia reactiva activa.

Contador de horas

Relación de transformador de tensión para aplicaciones MT

Entrada digital opcional acepta señales de CA y CC

Diseñado para red de 230 / 400V

Tasa de muestreo de 4096 s/s rango de precisión del 0,5%

MEDICIONES: Tensiones de fase a fase:: U12-U23-U31

Tensiones de fase a neutro:: V1-V2-V3

Corrientes de fase:: I1-I2-I3

Potencia activa P1-P2-P3

Potencia reactiva: Q1-Q2-Q3

Potencia aparente: S1-S2-S3

Factor de potencia: cos1-cos2-cos3

Contadores de potencia activa: ∑P

Contadores de potencia reactiva: ∑Q

Potencia aparente Total: ∑S

Factor de Potencia Total: ∑cos

Medidor de Potencia Activa: Pc1

Medidor de Potencia Reactiva: Qc1

Contador de horas de Trabajo: Hc1

Valor THD de entradas de Tensión y Corriente.

ESPECIFICACIONES Entrada de alimentación 170-275 VAC, 45-66 Hz

TÉCNICAS: Diferentes voltajes de alimentación de CA disponibles

Voltaje de entrada: 10 - 300 V AC (L-N) / 20 - 520 V AC (L-L)

Entradas actuales: 0.2 - 5.5 A AC

Frecuencia: 30 - 100 Hz

DIMENSIONES: 102 x 102 x 53 mm

DKM-409S


Puerto serie RS-485 completamente aislado

Comunicación MODBUS-RTU

2 salidas de relé configurables

Entradas digitales configurables y aisladas ópticamente.

Contadores duales conmutados de potencia activa-reactiva

Medición de energía de red / generador independiente


PANTALLA: Pantalla LCD gráfica de alta visibilidad, 128x64 píxeles












Medidor de Potencia Activa: Pc1-Pc2

Medidor de Potencia Reactiva: Qc1-Qc2

Contadores Generales: USR1-USR2-USR3-USR4

ESPECIFICACIONES Entrada de alimentación 170-275 VAC, 50-60 Hz nominal






Unidad base, sin puerto RS-485, sin E / S digital

ANALIZADORES DE RED

DATAKOM 1

PRODUCTO TURCO 2019

DKM-409S4

























2-31 armónicos de tensión y entrada de corriente.







Unidad base, puerto RS-485, sin E / S digital

DKM-409

























2-31 armónicos de tensión y entrada de corriente.


TÉCNICAS: Voltaje de entrada: 10 - 300 V AC (L-N) / 20 - 520 V AC (L-L)




Unidad base, puerto RS-485, 2 entradas digitales, 2 salidas digitales

DATAKOM 2

PRODUCTO TURCO 2019

DKM-411

CARACTERISTICAS: Mediciones RMS verdaderas, 0.2% de precisión

Visualización del diagrama de fasor

Batería interna respaldada en tiempo real.

2 entradas digitales opto-aisladas, configurables



Contadores duales de potencia activa-reactiva

Medición de energía tanto de la red como del generador.


PANTALLA: TFT LCD de 3.5 ", 320x240 píxeles

Pantalla de distorsión armónica (63 armónicos)

MEDICIONES: Tensiones de fase a fase: U12-U23-U31-Uavg

Tensiones de fase a neutro: V1-V2-V3-Vavg

Corrientes de fase: I1-I2-I3-In-Iavg-Itot

Potencia activa: P1-P2-P3-∑P

Potencia reactiva: Q1-Q2-Q3-∑Q

Potencia aparente: S1-S2-S3-∑S

Factor de potencia: cos1-cos2-cos3-∑cos

Contadores de potencia activa: Pc1-Pc2

Contadores de potencia reactiva: Qc1-Qc2

Contadores de usuarios: USR1-USR2-USR3-USR4

2 ... 63 armónicos de cualquier tensión o corriente.

Ángulos de vector de fase a neutros

Fases de fase a fase vector ángulos

Diagrama vectorial de fasor

ESPECIFICACIONES Entrada de alimentación 85 A 300V AC, 50-60 Hz nominal

TÉCNICAS: Voltaje de entrada: 5 - 300 V AC (L-N) / 10 - 520 V AC (L-L)



Rango CT: 5/5A a 10'000/5A


DATAKOM 3

DKM-405

NETWORK ANALYSER

WITH TOTAL HARMONIC

DISTORTION DISPLAY

The DKM-405 is a low cost precision instrument designed to display various AC parameters in a 3-phase distribution panel.

The standard unit is designed for 230/400V network. A different version is available for 120/208V systems.

The harmonic analysis is available for up to 31 harmonics. THD values of both voltage and current inputs are available.

The optional digital input accepts both AC and DC signals and has programmable functions.

The optional relay output is programmable. Relay function is selected through a list.

The unit fits into a standard 92x92mm panel opening.

Phase to phase voltages: U12-U23-U31

Phase to neutral voltages: V1-V2-V3

Phase currents: I1-I2-I3

Phase active power: P1-P2-P3

Phase reactive power: Q1-Q2-Q3

Phase apparent power: S1-S2-S3

Phase power factor: cos1-cos2-cos3

Total active power: ∑P

Total reactive power: ∑Q

Total apparent power: ∑S

Total power factor: ∑cos

Active power counter: Pc1

Reactive power counter: Qc1

Hour counter: Hc1

Total Harmonics of any voltage or current

True RMS measurements

Total harmonic distortion display

Max demand display

Configurable relay output

Energy pulse output capability

Optically isolated, configurable digital input

Active-reactive power counters

Hour counter

Voltage transformer ratio for MV applications

Front panel programming

Reduced panel depth

Wide operating temperature range

Sealed front panel (IP54)

Plug-in connection system

INTRODUCTION

MEASURED PARAMETERS

FEATURES

Power Supply Input: 170 - 275VAC, 50 - 60Hz nominal (± 10%) Different supply voltages available. Measurement Input Range:

Voltage: 10 - 300 V AC (L-N) 20 - 520 V AC (L-L) Current: 0.2 - 5.5 A AC Frequency: 30 - 100 Hz

Accuracy: Voltage: 0.5%+1digit Current: 0.5%+1 digit Frequency: 0.5%+1 digit Power(kW,kVAr): 1.0%+2digit Power factor: 2.0%+2digit Measurement Range: CT range: 5/5A to 5000/5A

VT range: 0.1/1 to 200.0/1 kW range: 0.1 kW to 6.5MW

Power Consumption: < 4 W Voltage burden: < 0.1VA per phase Current burden: < 1VA per phase Relay Output: 5A @ 250V AC Digital Input: Active level: 5 to 30V-DC or AC Min pulse: 250ms. Isolation: 1000V AC, 1 minute Operating Temperature:

-20°C to +80°C (-4 to +176 F). Maximum humidity: 95% non-condensing. Degree of Protection: IP 54 (Front Panel) IP 30 (Back panel) Enclosure: Non-flammable, ROHS compliant Installation: Flush mounting with rear brackets Dimensions: 102x102x53mm (WxHxD) Panel Cutout: 92x92mm Weight: 200 gr

EU Directives: 2006/95/EC (LVD) 2004/108/EC (EMC)

Norms of reference: EN 61010 (safety) EN 61326 (EMC)

Pieces per Package: 12 pieces Package Size: 280 x 170 x 215mm Package Weight: 2.6 kg

CONNECTION DIAGRAM

MOUNTING TOLERANCES

PANEL CUTOUT DIMENSIONS

TECHNICAL SPECIFICATIONS

PACKAGING INFORMATION

DKM-409

NETWORK ANALYSER

WITH HARMONIC

MEASUREMENT AND

SCOPEMETER

The DKM-409 is a precision instrument designed for displaying various AC parameters in 3-phase distribution panels.

Thanks to its isolated RS-485 Modbus RTU communication port, the device is free from ground potential difference issues and measured parameters are safely transferred to factory and building automation systems.

The power supply of the unit is isolated, thus the device can be used safely in 230/400V systems.

The graphic screen allows display of waveforms and harmonic analysis graphs.

Various display screens can be scrolled automatically. The user configurable screen where any measured parameter set can be displayed, transforms the unit to a custom designed measurement panel.

The unit fits into a standard 92x92mm panel opening.

Phase to phase voltages: U12-U23-U31

Phase to neutral voltages: V1-V2-V3

Phase currents: I1-I2-I3

Phase active power: P1-P2-P3

Phase reactive power: Q1-Q2-Q3

Phase apparent power: S1-S2-S3

Phase power factor: cos1-cos2-cos3

Total active power: ∑P

Total reactive power: ∑Q

Total apparent power: ∑S

Total power factor: ∑cos

Active power counters: Pc1-Pc2

Reactive power counters: Qc1-Qc2

User counters: USR1-USR2-USR3-USR4

2...31 Harmonics of any voltage or current

True RMS measurements

Harmonic distortion display (31 harmonics)

Oscilloscope, waveform display

Max demand display

User configurable display screen

Fully isolated RS-485 serial port

MODBUS-RTU communication

2 configurable relay outputs


Optically isolated, configurable digital inputs

Switched dual active-reactive power counters

Independent mains/generator energy metering

Configurable user counters


Password protected front panel programming

High visibility, 128x64 pixels graphic LCD

Reduced panel depth

Wide operating temperature range


Plug-in connection system

MEASUREMENTS

INTRODUCTION

FEATURES

Power Supply Input: 170 - 275VAC, 50 - 60Hz nominal (± 10%) Measurement Input Range:


Accuracy: Voltage: 0.5%+1digit Current: 0.5%+1 digit Frequency: 0.5%+1 digit Power(kW,kVAr): 1.0%+2digit Power factor: 2.0%+2digit Measurement Range: CT range: 5/5A to 5000/5A

VT range: 1.0/1 to 5000.0/1 kW range: 1.0 kW to 50.0 MW

Power Consumption: < 4 VA Voltage burden: < 0.1VA per phase Current burden: < 1VA per phase Relay Outputs: 5A @ 250V AC Digital Inputs: Active level: 5 to 30V-DC or AC Min pulse: 250ms. Isolation: 1000V AC, 1 minute Serial Port: Signal level: RS-485 Protocol: Modbus RTU Data Rate: 9600 bauds Isolation: 500V AC, 1 minute Operating Temperature:

-20°C to +70°C (-4 to +158 F). Maximum humidity: 95% non-condensing. Degree of Protection: IP 54 (Front Panel) IP 30 (Back panel) Enclosure: Non-flammable, ROHS compliant Installation: Flush mounting with rear brackets Dimensions: 102x102x53mm (WxHxD) Panel Cutout: 92x92mm Weight: 350 gr

EU Directives: 2006/95/EC (LVD) 2004/108/EC (EMC)

Norms of reference: EN 61010 (safety) EN 61326 (EMC)

Pieces per Package: 12 pieces Package Size: 280 x 170 x 215mm Package Weight: 4.4 kg

CONNECTION DIAGRAM

MOUNTING TOLERANCES

PANEL CUTOUT DIMENSIONS


PACKAGING INFORMATION

DKM-411 POWER ANALYSER

• COLOUR TFT SCREEN

• IP COMMUNICATIONS

• HARMONIC ANALYSIS

• SCOPEMETER

The DKM-411 is an advanced precision metering device offering an 3.5” size, 320x240 pixel color TFT, together with unrivalled remote monitoring capabilities over internet in a compact and low cost package.

The unit itself is a web page and can be opened through any browser for remote monitoring.

The central monitoring feature allows monitoring of thousands of meters from one central PC.

True RMS measurements, 0.2% accuracy

3.5” TFT LCD, 320x240 pixels

Harmonic distortion display (63 harmonics)

Oscilloscope, waveform display

Phasor diagram display

Internal battery backed-up real time clock

Max demand display

User configurable display screen

2 configurable relay outputs


2 opto-isolated, configurable digital inputs

Dual active-reactive power counters

Both mains/generator energy metering

Configurable user counters


Password protected front panel programming

Reduced panel depth


Phase to phase voltages: U12-U23-U31-Uavg

Phase to neutral voltages: V1-V2-V3-Vavg

Phase currents: I1-I2-I3-In-Iavg-Itot

Active power: P1-P2-P3-∑P

Reactive power: Q1-Q2-Q3-∑Q

Apparent power: S1-S2-S3-∑S

Power factor: cos1-cos2-cos3-∑cos

Active power counters: Pc1-Pc2

Reactive power counters: Qc1-Qc2

User counters: USR1-USR2-USR3-USR4

2...63 Harmonics of any voltage or current

Phase to neutral voltages vector angles

Phase to phase voltages vector angles

Phasor vector diagram

Modbus RTU RS-485 Modbus TCP/IP SNMP TCP/IP server TCP/IP client UDP SMTP Embedded web server Web monitoring Web programming GSM-SMSsending e-mailsending Central Monitoring through IP Free configuration & monitoring software

Ethernet 10/100Mb RS-485 isolated (Modbus RTU) RS-232 for external GPRS modem USB Host for data recording on flash memory USB Device for PC connection

3 phases 4 wires, star 3 phases 3 wires, 3 CTs 3 phases 3 wires, 2 CTs (L1-L2) 3 phases 3 wires, 2 CTs (L1-L3) 3 phases 4 wires, delta 2 phases 3 wires, L1-L2 2 phases 3 wires, L1-L3 1 phase 2 wires

FEATURES

MEASUREMENTS

COMMUNICATIONS

SUPPORTED TOPOLOGIES

COMMUNICATION PORTS

o

Power Supply Input: 100-240V AC nominal(± 20%), 50 - 60Hz nominal DC supply versions available. Power Consumption: < 5 VA Measurement Input Range:


Accuracy: Voltage: 0.2%+1digit Current: 0.2%+1 digit Frequency: 0.1%+1 digit Power(kW,kVAr): 0.4%+2digit Power factor: 0.2%+1digit Measurement Range: CT range: 5/5A to 10’000/5A

VT range: 0.1/1 to 200.0/1 kW range: 0.1 kW to 6.5MW

Voltage burden: < 0.1VA per phase Current burden: < 1VA per phase Relay Outputs: 5A @ 250V AC Digital Inputs: Active level: 5 to 30V-DC or AC Min pulse: 250ms. Isolation: 1000V AC, 1 minute Operating Temperature: -20°C to +50°C (-4 to +176 °F). Maximum humidity: 95% non-condensing. Degree of Protection: IP 65 (Front), IP 30 (Back) Enclosure: Non-flammable, ROHS compliant Installation: Flush mounting with rear brackets Dimensions: 102x102x53mm (WxHxD) Panel Cutout: 92x92mm Weight: 350 gr

UL-CSA Certification: UL 61010-1, 3rd Edition, 2012-05, CAN/CSA-C22.2 (File: E475547, Vol. D1) EU Directives:

2006/95/EC (LVD) 2004/108/EC (EMC)

Norms of reference:

EN 61010 (safety) EN 61326 (EMC)

CONNECTION DIAGRAM


COMMUNICATION DIAGRAM

o

RAINBOW PROGRAM

o

o

Web Monitoring Web Monitoring Event Log Display

CENTRAL MONITORING

EMBEDDED WEB SERVER

ANALIZADORES DE RED - sebatelec.com€¦ · DKM-409S CARACTERISTICAS: Mediciones RMS verdaderas...

Documents

Transcript of ANALIZADORES DE RED - sebatelec.com€¦ · DKM-409S CARACTERISTICAS: Mediciones RMS verdaderas...