Post on 09-Feb-2017
Standing out from the crowd
History
2
1973 – Founded in UK 1979 – Established first crystal factory 1998 – Acquired by CMAC 2007 – Acquired by Rakon Ltd 2008 – MBI by previous management team 2012 – Opened US Sales Office
40+ years as a manufacturer & supplier of frequency products
3
IQD Locations Worldwide
Sales Offices Distributors Representatives Customers
4
Strong constant improvement culture
About Us Manufacture frequency products with
the following capacities: Crystals - 30 Million per month Oscillators - 10 Million per month VCXOs - 3 Million per month TCXOs - 1.5 Million per month OCXOs – 6000 per month
Supporting customers worldwide Trusted partner of global companies Authorised Partner for Rakon & Statek
5
Worldwide Sales Over 3,500 active customers in
over 60 countries
Leading position in European market
64%
21%
14% 1%
Europe Asia Americas Other
6
Global Distribution Channels
Global Distribution Channels
7
Broad Market Engagement Aerospace Automotive Communications Computing Consumer Industrial Instrumentation Medical Military Test & Measurement
All markets other than space supported
Full circuit characterisation service
Engineering Support Services Application support for new designs &
problem resolution Sample development for prototypes Full electrical testing & screening Crystal test data for electrical modelling
by customer (i.e. motional parameters) Frequency/temperature testing with
customer specific ramp-profiles Product burn-in, heat-soak &
accelerated ageing Full circuit characterisation service MTIE/TDEV testing 8
9
ISO9001 approved since 1988
Quality Process Management ISO9001 approved since 1988 Automotive products to AEC-Q200 &
TS16949 release with full PPAP System controlled quality assurance:
Suppliers & purchase material Change & Failure Management Calibration & Measurement 8D Quality Reports
Moisture Sensitivity Level (MSL) compliance
Full traceability
10
Over 70,000 parts & millions of units ex-stock
Comprehensive Product Range >1000 Models Quartz Crystals including Automotive to
AEC-Q200/TS16949 Crystal Clock Oscillators including fast
make programmable & Automotive to AEC-Q200/TS16949
VCXOs TCXOs & VCTCXOs OCXOs Advanced Modules including GPS
disciplined models Rubidium Oscillators
11
Packages down to 1.55 x 0.95mm
Quartz Crystals SMD & thru hole packages 10kHz to 270MHz Frequency Tolerances from ±5ppm Frequency Stabilities from ±5ppm
(depending on temperature range) Operating Temperature Range
from –55 to 225°C Extreme high shock & vibration versions
available Automotive & Industrial models to
AEC-Q200/TS16949
12
Lowest cost SMD package
Standard Crystal: HC49/4HSMX SMD & thru hole packages 3.2MHz to 100MHz Frequency Tolerances from ±10ppm Frequency Stabilities from ±15ppm
(depending on temperature range) Operating Temperature Range
from –55 to 105°C Automotive version available Typical applications:
Home automation, process control, security systems, routers, telemetric systems
13
5 x 3.2mm ceramic package
Industry Standard Crystal CFPX-104 5 x 3.2mm ceramic package 8 to 52MHz (Fund),
40 to 133MHz (3rd OT) Ageing ±3ppm max in first year Tolerance & stability from ±10ppm;
-40 to 85°C Typical applications:
Industrial: Security systems, fire alarms, home automation, utility smart meters, POS systems
Communications: Bluetooth, Zigbee, RF modules, Wi-Fi & WiMAX, DAB radio
Green energy: Solar panels, smart meters
Industry Standard Crystal CFPX-180
14
3.2 x 2.5mm ceramic SMD package 10 to 200MHz (Fundamental) Tolerance & stability from ±10ppm, max
operating temperature -40 to 85°C Typical applications:
Industrial: Security systems, fire alarms, home automation, utility smart meters, POS systems
Communications: Bluetooth, Zigbee, RF modules, Wi-Fi & WiMAX, DAB radio
Green energy: Solar panels, smart metersLowest cost ceramic package
15
One of the world’s smallest quartz crystals
Ultra-Miniature Crystal IQXC-42 2.0 x 1.6 x 0.5mm high ceramic package Operating temp range -40 to 85°C Frequency range from 20 to 50MHz Frequency stabilities down to ±10ppm Typical applications:
Portable equipment such as hand held inventory control devices, battery powered telemetry equipment, notebook computers and surveillance devices
16
Frequency Stabilities from ±5ppm
Crystal Clock Oscillators (SPXOs) SMD & thru hole packages 10kHz to 1500MHz Frequency Stabilities from ±5ppm
(depending on required temperature range)
Operating temperature range from-55 to 200°C
Voltages: 1.8, 2.5, 2.8, 3, 3.3 & 5V Outputs: HCMOS, TTL, LVPECL, LVDS Automotive & Industrial models to
AEC-Q200/TS16949
17
Stability from ±20ppm over -40 to 85°C
Industry Standard SPXO CFPS-72/3 7 x 5mm ceramic package CFPS-73 (3.3V) 0.5 to 157MHz
CFPS-72 (5V) 0.5 to 100MHz Ageing max ±3ppm in first year 3.3 & 5V CMOS/TTL Stability from ±20ppm over -40 to 85°C Typical applications:
Industrial: Process control, security systems Communications: Data comms, Ethernet,
routers
18
Current consumption 20mA typical
Industry standard SPXO CFPS-9 5 x 3.2mm ceramic package Current consumption 20mA typical Frequencies 0.5 to 160MHz 3.3V CMOS; ageing max ±3ppm first year Stability from ±25ppm over -40 to 85°C Typical applications:
Industrial: Process control, security systems Communications: Data comms, Ethernet,
fibre channel, optical networking
19
Stability from ±25ppm over -40 to 85°C
Industry standard SPXO CFPS-39 3.2 x 2.5mm ceramic package Current consumption 7mA typical 2 to 50MHz Ageing max ±3ppm in first year 3.3V CMOS Stability from ±25ppm over -40 to 85°C Typical applications:
Industrial: process control, security systems Communications: data comms, Ethernet,
Wi-fi & WiMAX
Low Jitter/Noise SPXO: IQXO-931
20
2.5 x 2.0 x 1.0mm ceramic package 0.5ps integrated RMS phase jitter 8 to 1500MHz Stability from ±10ppm over -40 to +85°C Voltages; 2.5 & 3.3V Outputs; CMOS, LVPECL & LVDS Typical applications:
Base stations, Ethernet, Femtocells, SoNET/SDH, storage (SAN), video broadcasting, WiMAX/WLAN0.5ps integrated
RMS phase jitter
21
High Shock SMD SPXO HGXO High shock up to 100,000G; vibration
20g at 10-2000Hz swept sine perMIL-STD-202G
460kHz to 50MHz Voltages 3.3 & 5V Frequency stability ±40ppm over
-55 to 125°C HGXO typical applications:
Military applications such as smart munitions & projectile electronics
Demanding industrial applicationsHigh shock up to
100,000G
22
Frequencies to 1500MHz
VCXOs Voltage Controlled Crystal Oscillators SMD & thru hole packages 1 to 1500MHz Frequency Stabilities from ±10ppm
(Depending on temperature range) Operating Temperature Range from
-40 to 85°C Pullability from ±50ppm min Voltages: 1.8, 2.5, 2.8, 3.3 & 5V Outputs: HCMOS, TTL, LVPECL, LVDS &
Sinewave
23
Pullability ±100ppm min
Standard VCXO: IQXV-50/51/52 Industry standard 7 x 5mm package Pullability ±100ppm min 2.5, 3.3, 5V HCMOS Ageing max ±3ppm in first year 1 to 60MHz Frequency Stability ±20ppm -40 to 85°C Typical applications:
Communications: Ethernet, SDH/Sonet, satellite communications, video networking
T&M: Frequency synthesisers, network analysers
24
Pullability ±50ppm minimum
Standard VCXO: IQXV-60/61/63 Industry standard 5 x 3.2 mm package Pullability ±50ppm min 2.5, 3.3, 5V HCMOS Ageing max ±3ppm in first year 1 to 77.76MHz Frequency stability ±20ppm -40 to 85°C Typical applications:
Communications: Ethernet, SDH/Sonet, Satellite communications, video networking, fibre channel
Test & Measurement: Frequency synthesisers, network analysers
Standard VCXO: IQXV-41/42/43
25
Industry standard 3.2 x 2.5 mm package Current consumption down to 5mA (1.8V) Pullability ±50ppm min 1.8, 2.5, 3.3V HCMOS Ageing max ±3ppm first year 1.25 to 54MHz -40 to 85°C Typical applications:
Communications: Ethernet, SDH/Sonet, satellite communications, video networking
Test & Measurement: Frequency synthesisers, network analysers
Industry standard 3.2 x 2.5 mm package
LVPECL/LVDS VCXO: IQXV-80/81
26
Industry standard 3.2 x 2.5mm package 40 to 170MHz Pullability ±80ppm min 3.3V LVPECL (IQVX-80), LVDS (IQXV-81) Frequency Stability ±25ppm -40 to 85°C Ageing max ±2ppm first year Typical applications:
Ethernet, SDH/Sonet, Digital imaging, WiMax, WLAN, PLLs Frequencies up to
170MHz
Low Jitter VCXO: IQXV-89
27
Industry standard 7 x 5mm package 0.05 to 0.3ps RMS phase jitter Phase noise -148dBc/Hz @100kHz 1 to 800MHz Pullability ±50ppm min APR 2.5 & 3.3V HCMOS, LVPECL, LVDS Frequency Stability ±10ppm -40 to 85°C Typical applications:
DSL, Ethernet, Femto & pico cells, Remote radio heads, SONET/SDH, Video broadcasting
0.05 to 0.3ps RMS phase jitter
28
Frequency Stabilities from ±0.05ppm
TCXOs & VCTCXOs Temperature Compensated Crystal
Oscillators SMD & thru hole packages 1 to 800MHz Frequency Stabilities from ±0.05ppm Operating Temperature Range
from -40 to 85°C Pullability from ±5ppm (VCTCXOs) Voltages: 1.8, 2.5, 2.8, 3.0, 3.3, 5 & 12V Outputs: HCMOS, Sine, Clipped
Sinewave
29
Tight stability ± 0.5ppm over -40 to 85°C
Standard VCTCXO: CFPT-126 7 x 5mm 3.3V HCMOS VCTCXO Tight stability ± 0.5ppm -40 to 85°C ±5ppm pulling Typical current consumption 3mA 10 to 40MHz Typical applications:
Communications: Base stations, repeater stations, digital switching, SDH/Sonet
Test & Measurement
30
3.2 x 2.5mm HCMOS VCTCXO
Standard VCTCXO: IQXT-191 3.2 x 2.5mm HCMOS VCTCXO Voltages 2.5, 2.8, 3, 3.3V Frequency stability ±2.5ppm -30 to 85°C Typical current consumption 6mA 8.192 to 40MHz Typical applications:
Communications: Zigbee, Bluetooth, RF modules, RFID, Wi-Fi & WiMAX
Industrial: POS systems
31
±0.14ppm frequency stability
Tight Stability TCXO: IQXT-210 ±0.14ppm frequency stability 10 to 50MHz in 5.0 x 3.2mm package Industrial operating temperature range
-40 to 85°C 3.3V with typical current draw 10mA Voltage control option available Outputs: HCMOS & Clipped Sinewave Typical applications:
Femto & micro basestations, GPS/GNSS, IP networking, point to point comms, RF & WiFI modules, Sonet/SDH, SynchE, Test & measurement
Low power TCXO/VCTCXO: IQXT-260
32
2.5 x 2.0 x 0.8mm SMD package 2mA current consumption & 0.01µA
standby current when in power down mode
±0.5ppm frequency stability over -40 to +85°C
10 to 52MHz 1.8 to 3V Voltage control & enable/disable
options available Output: Clipped Sinewave Typical applications:
GPS, PNDs, Ethernet, Wi-Fi, Wi-Max, WLAN
0.01µA standby current
33
MCXO: IQMT-100 Microcomputer Compensated Crystal
Oscillator OCXO performance in a standard
clock oscillator 7 x 5mm package ±50ppb frequency stability –40 to 85°C Excellent typical short term stability of
2E-10/s Typical applications:
Femto, pico & micro base stations, digital switching, GPS/GNSS, microwave backhaul, digital video broadcast, satellite up converters, SynchE, environmental monitoring
OCXO performance in a standard clock oscillator package
OCXOs
34
Oven Controlled Crystal Oscillators SMD & thru hole packages 4.0 to130MHz Frequency Stabilities from ±0.2ppb Operating Temperature Range
from -40 to 85°C Voltages 3.3, 5.0, 12 & 15V Outputs HCMOS, ACMOS, Sinewave,
Clipped Sinewave Phase Noise -180dBc @100kHz Low Ageing < ±50ppb per year
Frequency Stabilities from ±0.2ppb
35
Stabilities down to ±3ppb
Low ageing OCXO: IQOV-70 36 x 27mm thru hole Stabilities from ±3ppb Operating temperature range
from -40 to 75°C Ageing in first year ±50ppb max Phase noise -150dBc/Hz @ 100kHz 4 to 80MHz; available with Voltage Control Typical applications:
Base stations, digital switching, remote radio heads, satellite comms, Test & Measurement equipment
36
Low ageing OCXO: IQOV-90 25.4 x 22mm SMD Stability from ±3ppb
Operating temperature rangefrom -40 to 75°C
Ageing in first year max ±50ppb Phase noise -150dBc/Hz @ 100kHz 10 to 40MHz; available with Voltage Control Typical applications:
Base stations, digital switching, remote radio heads, satellite comms, Test & Measurement equipment
Ageing in first year max ±50ppb
37
Only 6.5mm high in 14 x 9mm package
Ultra Miniature OCXO: IQOV-162 10ppb stability over -40 to 85°C Only 6.5mm high in 14 x 9mm package 10 to 100MHz Ageing <±500ppb per year Typical applications:
CDMA base stations, Femtocells, optical networking, SynchE
3G & 4G LTE, Ethernet, SoNET/SDH, ATM backplanes, SATA
Satellite communications
38
Sub-Miniature OCXO: IQOV-71 9.7 x 7.5mm plastic package Developed frequencies:
10MHz, 12.8MHz, 19.2MHz, 20MHz, 24.576MHz, 25MHz, 30.72MHz, 38.88MHz, 40MHz, 49.152MHz, 50MHz
Tight stability: ±10ppb -20 to +70⁰C or ±20ppb -40 to +85⁰C
Low power consumption ≤1 Watt Fast Warm up < 3 minutes Typical applications:
Base stations, Small Cells, Instrumentation, Time and Frequency Reference, Broadcasting, Satellite Communications
The smallest OCXO in the world
Ultra Tight Stability OCXO: IQOV-164
39
36 x 27mm ‘Europack’ Stability from ±0.2ppb, max operating
temperature range -40 to 85°C Ageing in first year max ±100ppb Phase noise -155dBc/Hz @ 100kHz 5 to 100MHz; available with Voltage Control Outputs: HCMOS, Sinewave Voltage: 3.3v Typical applications:
Base stations, GPS, Radar, Point to point comms, Sonet/SDH, PCI express, Wi-Max, Broadcast reference standards
Ultra tight stability of ±0.2ppb
40
Phase noise only-180dBc/Hz @ 100kHz
Ultra Low Phase Noise OCXO IQOV-200F Phase noise -180dBc/Hz @ 100kHz High frequency range from 80 to 130MHz Tight temperature stability to ±50ppb 12v supply with Sinewave output 36 x 27 x 16mm ‘Eurostyle’ package Typical applications:
Test & Measurement Systems Radar
41
Advanced Modules SMD & thru hole packages 1PPS Output (pulse per second) 10MHz back up oscillator Operating temperature range
from -40 to 85°C Voltage 5V Outputs: HCMOS, Sinewave
1PPS Output (pulse per second)
42
Frequency accuracy to within ±1E-12
GPS Advanced OCXO Clock Module IQCM-100 Holdover 1.5μs/24 hours when locked
to a 1PPS input from external GPS receiver, easily meeting industry standard requirements
Adaptive algorithm ‘learns’ from stable GPS signal over 2 days & can be adjusted to allow for errors
Frequency accuracy to within ±1E-12 when locked to a 1PPS GPS signal
Typical applications: LTE & 4G base stations
43
Clock Module Evaluation Board Allows testing and evaluation of IQD’s
IQCM-100 & IQCM-110 clock modules Available with or without on board GPS Functions:
Monitor output data word from the clock module via standard serial interface on a PC
Read clock module status via UART interface Monitor 1PPS and 10MHz output from the
clock module via BNC connections Monitor GPS 1PPS signal with respect to the
clock module 1PPS via BNC connections Switch between lock to GPS 1PPS, lock to
external 1PPS or No GPD lock
Testing & evaluation of IQCM-100 & IQCM-110
44
Clock Module Evaluation Board Functions (continued):
Optional on board GPS unit with GPS NMEA data accessible via USB
LED indication of GPS lock status LED indication of 1PPS clock module output Test point connections to allow for easy
monitoring of signals and status lines Removable clock module for testing of
multiple units
Kit Contents (excludes clock module) 1x Clock module evaluation PCB 1x Serial Cable 1x Power supply unit (5.0VDC @ 4A) 1x GPS antenna (optional)
Clock module must be ordered separately
45
1,000 times more accurate than typical OCXO
Rubidium Oscillator: IQRB-1 Accuracy of ±5E10-11 (±0.05ppb)
irrespective of temperature fluctuations Free run frequency source in applications
such as LTE (Long Term Evolution) systems 50.8 x 50.8mm Leaded package Short Term Stability 100s 0.008ppb Phase Noise -140dBc @1kHz Typical applications:
LTE systems that require exceptional timing accuracy
UTMS as well as extended holdover for CDMA and WiMax
46
Consistent on-time delivery >99%
In Summary Comprehensive product range Large stock for next day delivery Consistent on-time delivery >99% Engineering support from design to
production with dedicated applications support team
Multilingual sales team Custom product design to match your
requirements
Standing out from the crowd
47