TUTORIAL Varied Vases...-Bow: tie the Polka Dot Tulle Ribbon in a bow and attach it at the neck of...

Blythe Klipple, StampingWithBlythe.com, http://www.StampingWithBlythe.com Stampin’ Up! Online Store: www.BlytheStamps.StampinUp.net

I’m still trying to perfect my tutorials so if you have any questions or comments, please feel free to email me with them:

[email protected]

VARIED VASES STAMP SET and

2018-2020 IN COLOR DESIGNER SERIES

PAPER

Blythe Klipple http://www.StampingWithBlythe.com Page � of �1 9

http://StampingWithBlythe.com

http://www.StampingWithBlythe.com

http://www.BlytheStamps.StampinUp.net

BLUEBERRY BUSHEL CARD

TIPS:

- Score card front at 4-1/4”, fold away from the groove of the score line, and burning (rub firmly) with the Bone Folder.

- Solid color for the vase: Ink up stamp with Blueberry Bushel classic ink and stamp on grid or scratch paper two times. Then stamp it over the outline image of the vase.

- Bow: tie the Polka Dot Tulle Ribbon in a bow and attach it at the neck of the vase with the Mini Glue Dot

- Vase layer: Stamp vase on Whisper White card stock using Black Memento ink. Cover vase with a piece of scratch paper (this will be your ‘mask’), aligning edges at top so you can stamp the flower, also using Memento Black ink. Remove mask. Stamp flowers. Attach to Basic Black layer; attach to card front with 5 Dimensionals. Attach bow with a Mini Glue Dot.

- Attach the card stock pieces to the card front in this order: Basic Black, Whisper White, DSP. vase layer—attach with Dimensionals.

- Greeting: Use Blueberry Bushel classic ink.

STAMP SETS: - Varied Vases (146644)

INK: - Tuxedo Black Memento (132708) - Blueberry Bushel (147138)

CARD STOCK: - Blueberry Bushel (146968) 8-1/2” x 5-1/2” - Basic Black (121045) 5-1/8” x 3-7/8” and 2-1/8”

x 3-7/8” - Whisper White (100730) 5” x 3-3/4” and 2” x

3-3/4” - 2018-2020 In Color 6” x 6” Designer Series

Paper (aka DSP): Blueberry Bushel: 3/4” x 3-3/4”

ACCESSORIES: - Vases Builder Punch 147040) - 5/8” Polka Dot Tulle Ribbon (146912) 8” - Dimensionals (104430) - Mini Glue Dots (103683) - Bone Folder (102300) - Clear Blocks B (117147) and H (118490)


CALL ME CLOVER CARD

TIPS:

- Score card front at 4-1/4”, fold away from the groove of the score line, and burning (rub firmly) with the Bone Folder.

- Attach the card stock pieces to the card front in this order: Basic Black - Before addingWhisper White, attach DSP and wrap Black Baker’s Twine around both layers

and tie in bow (maybe tie a knot first, then bow). Attach to Basic Black layer. - Vase: Step 1- Stamp vase on small scrap of Whisper White card stock using Memento Ink. Step

2- Stamp inside of vase using Call Me Clover ink. Punch out. Lay on card front but do not attach yet. - Guestimate where your flower will be positioned with vase held (or just laid) in place. Remove

vase and stamp flower using Memento Ink. - Using Call Me Clover ink, stamp flowers. - Attach to card front using Dimensionals.

- Stamp greeting using Memento Black ink.


INK: - Tuxedo Black Memento (132708) - Call Me Clover (147139)

CARD STOCK: - Call Me Clover (146969) 8-1/2” x 5-1/2” - Basic Black (121045) 5-1/8” x 3-7/8” - Whisper White (100730) 5” x 3-3/4” and scrap

for vase - 2018-2020 In Color 6” x 6” Designer Series

Paper (aka DSP): Call Me Clover: 1/2” x 3-3/4”

ACCESSORIES: - Vases Builder Punch 147040) - Basic Black Solid Baker’s Twine (141682) - Dimensionals (104430) - Bone Folder (102300) - Clear Block B (118485)


GRAPEFRUIT GROVE CARD

TIPS: - Score card front at 4-1/4”, fold away from the groove of the score line, and burning (rub firmly)

with the Bone Folder. - Attach Basic Black layer to card front. Then attach Whisper White layer to that layer. - Cut a ‘flag’ at one end of the DSP piece. With Paper Snips, make a 3/4”-ish cut right up the

middle of one end of the DSP. Then cut from one corner diagonally to the end of the diagonal cut. Repeat from the other corner, creating the ‘flag’. Attach this piece to the Whisper White layer on the card front as shown in photo.

- On the small piece of Whisper White card stock, using Black Memento ink, stamp the outline image of the smallest vase. Stamp it again on computer paper or vellum, creating a mask. Cut or punch this vase and place it over the outline vase. Still using the Black Memento ink, stamp the stem for the flower. Then stamp the outline flower image.

- Now, using Grapefruit Grove ink, stamp the filler image inside the vase outline and the flower. - Sticking with the Black Memento ink, stamp the greeting on the lower left. - Attach this stamped layer to the Basic Black card stock piece and then attach those layers to the

card front using five Dimensionals.


INK: - Tuxedo Black Memento (132708) - Grapefruit Grove (147142)

CARD STOCK: - Grapefruit Grove (146972) 8-1/2” x 5-1/2” - Basic Black (121045) 5-1/8” x 3-7/8” and 3-3/8”

x 2-1/8” - Whisper White (100730) 5” x 3-3/4” and 3-1/4”

x 2” - 2018-2020 In Color 6” x 6” Designer Series

Paper (aka DSP): Grapefruit Grove: 1-3/4” x 4-1/4”

ACCESSORIES: - Basic Black Solid Baker’s Twine (141682) - Dimensionals (104430) - Bone Folder (102300)


- Tie a bow with the 8-10 inch piece of Black Baker’s Twine. Attach it just under the greeting with a Mini Glue Dot.


LOVELY LIPSTICK CARD

TIPS: - Score card front at 4-1/4”, fold away from the groove of the score line, and burning (rub firmly)

with the Bone Folder. Attach Basic Black layer to card front. Then attach Whisper White layer to that layer.

- Using the Big Shot and Layering Circle Framelits Dies, cut a 1-7/8” circle from the Whisper White scrap and a 2” scalloped circle from the Lovely Lipstick card stock scrap.

- Stamp the shortest vase with Memento Black ink on a Whisper White scrap. Using Lovely Lipstick, stamp the patterned filler inside the vase.

- Punch vase out with the Vase Builder Punch. Lay that piece on the Whisper White circle and determine where to stamp two stems. On another scrap, stamp two tulips. Using Lovely Lipstick ink, stamp the inside of the first tulip and then without re-inking, stamp the second tulip. Punch out with the Vase Builder Punch.

- Attach the vase and the two tulips with Dimensionals to the Whisper White circle. Attach that layer to the Lovely Lipstick scallop circle. Set aside.

- Cut a ‘flag’ at one end of the DSP piece. With Paper Snips, make a 3/4”-ish cut right up the middle of one end of the DSP. Then cut from one corner diagonally to the end of the diagonal cut. Repeat from the other corner, creating the ‘flag’. Attach this piece to the Whisper White layer on the card front as shown in photo.


INK: - Tuxedo Black Memento (132708) - Lovely Lipstick (147140)

CARD STOCK: - Lovely Lipstick (146970) 8-1/2” x 5-1/2” and

2-1/2” square piece for circle layer - Basic Black (121045) 5-1/8” x 3-7/8” - Whisper White (100730) 5” x 3-3/4” and

scraps for vase, die cut circle and greeting flag

- 2018-2020 In Color 6” x 6” Designer Series Paper (aka DSP): Call Me Clover: 2” x 4-1/4”

ACCESSORIES: - Vases Builder Punch (147040) - Big Shot Die Cutting Machine (143263) - Layering Circles Framelits (141705) - Tinted Faceted Buttons (146349) - Dimensionals (104430) - Bone Folder (102300) - Paper Snips


- Stamp your greeting on the remaining Whisper White scrap, trim above and below the greeting. Trim it down to about 3-5/8”. Then cut from each side, forming the ‘point’ of that layer. Attach to card front with adhesive of your choice.

- Using a Mini Glue Dot, attach a Lovely Lipstick Faceted Button to the left side of the greeting. - Using Dimensionals, attach the previously set aside vase layer to the card front, overlapping the

greeting banner just a wee bit.


PINEAPPLE PUNCH CARD

TIPS: - Attach larger Basic Black layer to card front. Then attach Whisper White layer to that layer. - On the smaller piece of Whisper White card stock, using Memento Black ink, stamp the outline

scalloped image. You’ll be about 3 scallops short, so carefully position your image (after re-inking!) and stamp the extra scallops. - Now ink up the solid scallop piece using Pineapple Punch classic ink and carefully stamp inside

the previous scallops. - Place a piece of computer paper (not card stock — it’s too thick) over the scallops and, using black

Memento ink, stamp the taller vase as if it’s resting on the scallops. Stamp that image again on a piece of scrap paper and either punch or ‘fussy cut’ it out (using paper snips/scissors). - Place the ‘mask’ you just cut/punched out over the vase and then ink up the narrow neck vase

using Memento Black, and stamp it next to, but overlapping, the taller vase. Remove the mask and you’ll see that the second vase looks as if it’s slightly behind the taller one.

- Stamp the solid patterned images on each vase using Pineapple Punch classic ink. Be sure to use the mask when stamping the patterned image on the shorter vase.

- Now you can use the same mask twice, once on each vase: cover vase #1 and stamp the flower image. Repeat with vase #2 and the other flower image.


INK: - Tuxedo Black Memento (132708) - Pineapple Punch (147141)

CARD STOCK: - Pineapple Punch (146971) 8-1/2” x 5-1/2” - Basic Black (121045) 5-1/8” x 3-7/8” and 4-3/8”

x 3-1/8” - Whisper White (100730) 5” x 3-3/4” and 4-1/4”

x 3” - 2018-2020 In Color 6” x 6” Designer Series

Paper (aka DSP): Call Me Clover: 1/2” x 3-3/4”

ACCESSORIES: - Basic Black Solid Baker’s Twine (141682) - scrap paper for ‘mask’ - Dimensionals (104430) - Bone Folder (102300)


- You can remove the masks and, using Pineapple Punch class ink, stamp the solid flower images in the appropriate places.

- Using Memento Black ink, stamp your greeting in the lower left area. - I used a little Crushed Curry Enamel Dot next to my vase because I had left a small black smudge

mark. It covered it perfectly.


TUTORIAL Varied Vases...-Bow: tie the Polka Dot Tulle Ribbon in a bow and attach it at the neck of...

Documents

Transcript of TUTORIAL Varied Vases...-Bow: tie the Polka Dot Tulle Ribbon in a bow and attach it at the neck of...