Beamex MCS200 Mesa de Calibracion

5/27/2018 Beamex MCS200 Mesa de Calibracion

1/7

MCS200 for automated calibration

www.beamex.com BeamexMCS200 for automated calibration

BeamexMCS200 Workstation

Automated Pressure and Temperature Calibration

Calibration of process instruments is animportant activity in the industry. It can be verytime consuming, depending on the equipment andwork processes used.

BeamexMCS200 enables fully automatedpressure and temperature calibration, along withother electrical maintenance. With software, itoffers a completely paperless calibration solution.

Following instruments can be calibrated with MCS200: Pressure transmitters, sensors, gauges, switches,

recorders

Differential pressure transmitters I/P converters Temperature transmitters, sensors, indicators,

switches, recorders

Thermocouples and RTDs HART instruments FOUNDATION Fieldbus instruments Profibus PA instruments Electrical limit switches Frequency meters, Tachometers, Pulse meters MCS200 also enables Testing and maintenance of electrical and electronic

devices.

Soldering and desoldering of electronic components

Calibration and test equipment included in MCS200: Host calibrator with user interface, electrical measurement

and 24V loop supply

Pressure measurement modules from vacuum to 1000 bar Automatic pressure controller, communicating with thehost calibrator Electrical and temperature module for TC measurements,

with reference junction

Temperature dry block, communicating with the hostcalibrator

Variable AC supply Variable DC supply Soldering and desoldering equipment Calibration software

Offers paperless calibration management from initialrecording of calibration data through to historical trendanalysis.


2/7

MCS200 for electrical testing and maintenance

www.beamex.com BeamexMCS200 for electrical testing and maintenance


Electrical Testing and Maintenance

Electrical and electronic testing and maintenancecan be carried out effectively and ergonomicallyusing a dedicated test bench fitted with well plannedset of equipment and accessories.

ESD protected BeamexMCS200 offers a versatile testand maintenance facility with variable AC and DC powersupplies, measuring instruments and soldering/desolderingequipment.

Features:

Testing and maintenance of electrical and electronicdevices and components

Ergonomic and ESD protected workstation withsemiconducting table top, ESD wrist strap andgrounding sets

ESD chair Magnifier light ESD compatible storage accessories

Test and measurement equipment in MCS200:

Programmable dual DC supply Programmable AC supply Constant DC supplies Isolated supply outlet Digital multimeter Digital oscilloscope Function generator/frequency counter ESD safe lead-free soldering and desoldering station


3/7

MCS200 for electronic measurements and testing

www.beamex.com BeamexMCS200 for electronic measurements and testing


Electronic Measurements and Testing

Testing and diagnosis of electronic componentsand devices can be carried out effectively andergonomically using a test bench fitted withappropriate measurement equipment.

BeamexMCS200 offers an ESD safe measurementfacility for testing and troubleshooting electronic devicesand loose circuit boards and checking of newly designedcircuitry and newly programmed electronics.

Features:

Testing and diagnosis of electronic components anddevices

Ergonomic and ESD protected workstation withsemiconducting table top, ESD wrist straps andgrounding sets

ESD chair Magnifier light ESD compatible storage accessories

Test and measurement equipment in MCS200:

Precision digital multimeter Digital phosphor oscilloscope Function generator/frequency counter LCR meter Constant DC supplies Programmable DC supply Isolated supply outlet Hand held IC testers for digital and analog devices


4/7

MCS200 for motor and electrical testing

www.beamex.com BeamexMCS200 for motor and electrical testing


Motor and Electrical Testing

Functional tests are necessary after repair,maintenance or longer storage of electricalequipment, such as electrical motors, tools,extension cables, heaters and coolers.

BeamexMCS200 enables practical testing ofelectrical motors and other devices. Motors withoperating range 380-480 VAC can be tested withMCS200 up to 100 kW.

Following tests can be carried out with MCS200:

Electrical safety measurements and tests:

Ground resistance Insulation resistance High voltage tests Other measurable quantitiesMeasurements with 3 parameters on displaysimultaneously:

Voltage Current Speed Power Run time Output frequency kWh counterTest run of motors in different speeds

Measurements during motor test run:

Temperature Rotational speed Overall vibration Bearing conditionSoftware for entering motor parameters is included.

Test equipment included in MCS200: Control / measurement unit, output current max. 63A Combined safety and functional tester 3-phase voltage supply 0-400VAC 16A DC connection 0-500V 10A 3-phase power analyzer TRMS multimeter Tachometer Vibration meter


5/7

MCS200 for pressure and temperature calibration

www.beamex.com BeamexMCS200 for pressure and temperature calibration


Pressure and Temperature Calibration

Calibration of process instruments is animportant activity in the industry. It can be verytime consuming, depending on the equipment andwork processes used.

BeamexMCS200 enables efficient and highlyaccurate pressure, temperature and electricalcalibration. With software, it offers a completelypaperless calibration solution.

Following instruments can be calibrated with MCS200: Pressure transmitters, sensors, gauges, switches,

recorders

Differential pressure transmitters I/P converters Temperature transmitters, sensors, indicators,

switches, recorders

Thermocouples and RTDs HART instruments FOUNDATION Fieldbus instruments Profibus PA instruments Electrical limit switches Frequency meters, Tachometers, Pulse meters MCS200 also enables Testing and maintenance of electrical and electronic

devices. Soldering of electronic components

Calibration and test equipment included in MCS200: Host calibrator with user interface, electrical measurement

and 24V loop supply

Pressure measurement modules from vacuum to 1000 bar Regulation of low and high pressures as well as vacuum Electrical and temperature module for TC measurements,


Digital multimeter Variable AC and DC supplies Soldering station Calibration software

Offers paperless calibration management from initialrecording of calibration data to historical trend analysis.

Instrument data with calibration procedures aredownloaded to the host calibrator and results are

uploaded back to the PC, making the whole calibrationprocess fast and error free.


6/7

MCS200 for soldering and desoldering

www.beamex.com BeamexMCS200 for soldering and desoldering


Soldering and Desoldering

Maintenance, testing and repair of devices andcomponents can be carried out effectively andergonomically using a dedicated test bench fittedwith proper equipment and accessories.

ESD protected BeamexMCS200 enables solderingand desoldering of surface-mounted and traditionalcomponents as well as testing and maintenance ofelectrical and electronic devices.

Soldering and test equipment included in MCS200:

ESD safe lead-free soldering and desoldering station Infrared soldering / rework station Isolated supply outlet Digital multimeter Programmable variable AC supply Programmable variable DC supply Constant DC supplies LCR meter Digital oscilloscope Pressure connection for tools Digital IC tester Analog IC tester

Soldering accessories:

Fume extraction system Video microscope with LCD display Magnifier light Soldering tips Desoldering tips SMD tweezer Hot air pencil Liquid dispenser


7/7

MCS200 for temperature calibration

www.beamex.com BeamexMCS200 for temperature calibration


Temperature Calibration

Calibration of temperature and electricalinstruments is an important activity in the industry.It can be very time consuming, depending on theequipment and work processes used.

BeamexMCS200 enables efficient and highlyaccurate calibration of TCs, RTDs, electricalsignals and frequency. With Beamex dry block, itallows fully automated temperature calibration.

Following instruments can be calibrated with MCS200:

Temperature transmitters, sensors, indicators,switches, recorders Thermocouples and RTDs HART instruments FOUNDATION Fieldbus instruments Profibus PA instruments Electrical limit switches Frequency meters Tachometers Pulse meters Fully automated temperature calibration can be carriedout with the assistance of Beamex temperature blockcontrolled by the calibration host module.

Calibration and test equipment included in MCS200:

Host calibrator with user interface, electrical measurementand 24V loop supply Electrical and temperature module for TC measurements,


Pt100 simulator Decade box Precision digital multimeter LCR meter Function generator/frequency counter Variable AC and DC supplies Calibration software offers paperless calibrationmanagement from initial recording of calibration data tohistorical trend analysis.

Beamex MCS200 Mesa de Calibracion

Documents

Transcript of Beamex MCS200 Mesa de Calibracion