Post on 17-Jan-2017
Anti-Graffiti HVAC Tile Surface Sealer
Corporate Headquarters1901 Mason Ave, Suite 101Daytona Beach, FL 32117
Toll Free: 800-549-2539Phone: 386-274-1382Fax: 386-274-1798Web: www.adsil.com
CASE STUDY - University of Florida
University of Florida Receives the Prudential/Davis Maintenance Award
UF has used MicroGuard® clear floor treatments since 2001 on over 250,000 square feet of bathroom & common area tile floors and over 60,000 square feet of concrete flooring in the student union area. They continue to extend this work as time and budget permits.
According to Jim Crocker, Assistant Director of Housing, MicroGuard® treatments have provided the following benefits:
• 30%+ reduction in cleaning cost; time, labor, & chemicals.
• Significant odor reduction in the bathrooms with sealed grout.
• Marked improvement in the aesthetic surface appearance.
• Quicker cleaning turnover of rooms during semester change.
• Easier removal of chewing gum and stains from concrete
• No mold growth on the exterior concrete; this is Florida!
Anti-Graffiti Corrosion Protection Tile Surface Sealer HVAC Concrete Surface Sealer Anti-Skid
HVAC
Anti-Graffiti
Concrete Surface Sealer
Tile Surface Sealer
Anti-Graffiti & Paint Restoration Extreme Performance TreatmentMicroGuard® AD00 Anti-Graffiti Clear Surface Treatment provides a non-sacrificial barrier of protection for many bare or previously painted surfaces where graffiti tagging is a problem. The hydrophobic, naturally repelling properties of this inorganic clear treatment prevent graffiti from attaching firmly to the surface, thus, graffiti becomes easier to remove. Aerosol paint, permanent marker, ink, etc; can be removed using commercial graffiti removers without damaging the clear treatment.
MicroGuard® AD00 is also an ideal clear treatment for rejuvenating oxidized and faded paint finishes. OEM powder coated metal siding or roofing panels, metal doors, HVAC cabinetry, etc, can be restored to like new. Their appearance is protected from further deterioration for years to come. This clear treatment is non-yellowing, UV and acid rain resistant.
Extreme Performance Coating System for HVAC/R EquipmentMicroGuard®’s AD35, patented inorganic coating extends the life of your equipment and saves energy. MicroGuard® has been tested by numerous third party entities verifying the energy savings you can expect. Full reports available
• DOE & EPS (12.5% energy reduction)
• MACTEC (12.3% energy reduction)
• Florida Power & Light (9.5% energy reduction)
• Southern California Edison (11.9% average reduction)
• AT&T (10.3% to 12.8% energy reduction)
Concrete, Brick Pavers and Masonry Extreme Performance Treatments
MicroGuard® AD703 Concrete Clear Gloss Treatment is an ideal ‘Wet Look
Sealer’ for use as an impregnator on decorative brick pavers or exterior
concrete surfaces, such as sidewalks, driveways, patios, pool decks;
anywhere mitigating mold growth or minimizing organic staining is important.
When used as an impregnating sealer, a beautiful and subtle satin sheen is
achieved and colors within the substrate are dramatically enhanced.
MicroGuard® AD702 Concrete Clear Waterproofing Sealer is a perfect
choice for sealing interior concrete slabs to reduce water vapor transmission
before other types of flooring systems are installed, such as carpeting, tile or
wood laminates.
MicroGuard® AD702 Sealer & AD703 Gloss Treatment, as a finishing coat,
may also be used in conjunction with each other for coating interior concrete
floors, such as factory or warehouse installations, auto repair bays, aircraft
hangars or anywhere abrasion, solvent, chemical & stain resistance is
imperative.
Hard Tile, Decorative Stone & Terrazzo Extreme Performance TreatmentMicroGuard® AD708 Hard Tile Clear Gloss Treatment provides a long lasting and stunningly beautiful finish that positively protects tile, stone and terrazzo surfaces from abrasive wear, mold growth and chemical attack. Its hydrophobic film properties naturally repel dirt and other debris, which helps reduce the cost of cleaning chemicals and labor costs associated with cleaning maintenance.
Suitable for horizontal flooring and vertical wall installations, the cured film of MicroGuard® AD708 is water-clear, highly UV light resistant and maintains its depth of image without waxing or buffing. Grout is positively sealed and resists common stains such as oily grime, dirt, urea, mold and food or beverage products.
MicroGuard®
’s family of
products are continuously
helping facility managers preserve,
prolong, and protect their
surfaces. Primary benefits include:• Surfaces are protected from graffiti tagging• Graffiti mitigation costs are significantly lowered• Treatment remains crystal clear; non-yellowing
• Brightens & rejuvenates faded paint• Extends the useful life of many painted surfaces• Prevents mold
Primary benefits include:
• Unparalleled abrasion resistance (astm d-4060)
• Mitigates mold growth (astm g21)
• Improved traction on floor surfaces (astm d-2047)
• Eliminates the need for waxing & buffing
• Surfaces are easier to clean & maintain
• Provides excellent stain resistance properties
• Crystal clear finish is non-yellowing
• Highly resistant to common graffiti tagging
• Vibrantly enhances the color of decorative stone
• Interior or exterior installations
• Prevents mold
Summary: Preserve, Prolong & Protect your HVAC/R asset and receive all these features in one product:
• Extreme corrosion protection (astm b117 – 6,000+ hours)• Mitigate mold growth (astm g21 – zero growth)• Compelling energy savings (epa & other 3rd party energy studies)• Extended unit life (defer capital expenditures)• Coil is easier to clean (hydrophobic film repels debris)• Prevents mold
Energy Efficiency Rating (EER) Effects of Accelerated Salt Spray “Life” Testing of Identical ATC Glass-coated and Uncoated HVAC Units, Superimposed with Analysis of Aged/Degraded Units Pre- and Post- ATC Glass Treatment (black bars) (after Henderson, 2001)
Perc
ent o
f Ini
tial E
ER
Percent Life of Control Unit
20
0 20 40 60 80 100
40
60
80
100
Control UnitMicroGuard® CoatingPre-Post Testing
Primary benefits include:• Outstanding abrasion resistance (ASTM D-4060)• Will not support mold growth (ASTM G21)• Improved foot traction (ASTM D-2047)• Minimizes ‘dusting’ & ‘spalling’ of surface• Extreme solvent & chemical resistance• Positive vapor barrier control• Excellent stain resistance properties• Easier to clean & maintain surfaces• Prevents mold