8/14/2019 Mudhra Presentation PDF
1/27
By
Srikrishna.A.SSrikanth. R
Sriram. CFinal Year Students, B.E. Mechanical, Jeppiaar Engg. College
8/14/2019 Mudhra Presentation PDF
2/27
Acquaintance with industrial environment and identification of
required skill sets.
Hands-on learning of the functioning of various machines and
recognition of application of theoretical concepts.
Study of fundamental theories and concepts of metal pressing.
Overviews of basic principles of die and punch design.
Detailed study of any one metal pressing process.
Project Presentation - Jeppiaar Engineering College
8/14/2019 Mudhra Presentation PDF
3/27
The Mudhra Group is a leading manufacturer of
meticulously engineered, precision metal components
which caters to a wide clientele range in the automotive
industry.
Technical Partners :
Feintool Technologie, Switzerland
Trelleborg Rubore, Sweden. Only company in India that has the latest generation of
Fine-blanking systems in place.
Project Presentation - Jeppiaar Engineering College
8/14/2019 Mudhra Presentation PDF
4/27
Specialising in manufacture of :
Pad Backing plates (Disc Brakes).
Shims (Disc brake, rubberized steel).
Push-rods (Drum brakes, Auto-adjuster mechanism).
Commercialised tooling for domestic customers.
New product development capabilities :
Tooled-up sample in 4 weeks.
CNC wire-cut sample in less than a week.
ISO/TS16949 and QS9000 CKPMG certifications.
Project Presentation - Jeppiaar Engineering College
8/14/2019 Mudhra Presentation PDF
5/27
PRODUCT AUTOMOTIVE SECTOR CLIENTS
PAD BACKING PLATES
1. Maruti Suzuki full range2. TVS - Fiero motorcycle.3. Tata full range.4. Fiat full range
PUSH-RODS
1. Tata.2. Toyota.3. Fiat.4. Mahindra Scorpio.
5. Maruti Omni.
SHIMS
1. Tata2. Ford.3. Honda.4. Maruti.5. Mahindra.
Project Presentation - Jeppiaar Engineering College
8/14/2019 Mudhra Presentation PDF
6/27
Brakes India, Sundaram Brakes,
Rane Brakes,
Sundaram Fasteners,
Aztec Auto, Turbo Energy,
Axles India,
Wheels India,
Amalgamations Repco, Audco (L&T),
Ashok Leyland.
Project Presentation - Jeppiaar Engineering College
8/14/2019 Mudhra Presentation PDF
7/27Project Presentation - Jeppiaar Engineering College
8/14/2019 Mudhra Presentation PDF
8/27
PPAP is a Part approval process conceived and formulated byDaimler Chrysler Corp., Ford Motors and GM.
Defines the generic requirements for production part approval.
Purpose:
To determine if customer requirements are properly
understood.
To ascertain the potential of the mfg. facility to meetsustainable production rate demands.
Project Presentation - Jeppiaar Engineering College
8/14/2019 Mudhra Presentation PDF
9/27
Section 1: General submission of PPAP
Section 2: PPAP Requirements: 18 clauses
Section 3: Submission to customers.
Section 4: Levels of evidence ( 5 Levels )
Section 5: Part submission status Approved
Interim Approval
Rejected
Section 6: Record Retention
Project Presentation - Jeppiaar Engineering College
8/14/2019 Mudhra Presentation PDF
10/27
An FMEA can be described as a systemized group of
activities intended to:
Recognize and evaluate the potential failure of a product
or a process and its effects, Identify actions which could eliminate or reduce the
chance of the potential failure occurring, and
Document the process. It is complementary to the design
process of defining positively what a design must do to
satisfy the customer.
Project Presentation - Jeppiaar Engineering College
8/14/2019 Mudhra Presentation PDF
11/27
Design FMEA Living document initiated before or at design concept finalization
Continually updated as changes occur or additional information is
obtained
Emphasis on preventive design control.
Process FMEA
How can a process, function, facility, or tooling fail ?
What effect will process, function, facility, or tooling failures have on
the end product (or customer) ?
How can potential failures be eliminated or controlled ?
Suited for manufacturing processes.
Project Presentation - Jeppiaar Engineering College
8/14/2019 Mudhra Presentation PDF
12/27
Project Presentation - Jeppiaar Engineering College
8/14/2019 Mudhra Presentation PDF
13/27
Estimation of feasibility ofSMET (Single Minute Exchange of Tool)
Project Presentation - Jeppiaar Engineering College
8/14/2019 Mudhra Presentation PDF
14/27
In all, 150 tools dimension were recorded andhave been tabulated in the detailed report.
Tabulation done category wise.
This data would help the technicians to perform aSMET feasibility analysis.
Project Presentation - Jeppiaar Engineering College
8/14/2019 Mudhra Presentation PDF
15/27
Project Presentation - Jeppiaar Engineering College
8/14/2019 Mudhra Presentation PDF
16/27
Number of active working hours of machine in a 5-hour duration of production recorded over a periodof 5 days.
Time: 10:00hrs to 15:00hrs.
Totally, 38 machines were monitored thrice anhour for 5 hours daily.
Results plotted as a chronological graph in thedetailed report.
Project Presentation - Jeppiaar Engineering College
8/14/2019 Mudhra Presentation PDF
17/27
Project Presentation - Jeppiaar Engineering College
8/14/2019 Mudhra Presentation PDF
18/27
The objective of Phase III was to study the basic principles of die and
punch design with a special focus on blanking operation.
Overview of stamping process.
Types of stamping.
Functions of die and punch.
Hardening and heat-treatment processes.
Clearance between die and punch.
Shearing deformation and sheared edge study of Blanking operation.
Blanking force calculation.
Project Presentation - Jeppiaar Engineering College
8/14/2019 Mudhra Presentation PDF
19/27
In any stamping tool, there are two principal parts called Punchand Die. The punch is a male part which, during stampingoperation, slides into a cavity (female part) after penetrating
the metal. This cavity is called the die.
Both punch and die are made of Tool steel
Separation between the die and punch is called as Clearance. A stripper is used to hold down the sheet metal firmly as the
punch penetrates it.
Project Presentation - Jeppiaar Engineering College
8/14/2019 Mudhra Presentation PDF
20/27
The primary choice of material for Punches and Dies is tool-steel.
Tool steel refers to a variety of carbon and alloy that areparticularly well-suited to be made into tools.
Tool steel carbon content: 0.7% - 1.4%
Manganese content is kept to a minimum to resist cracking.
Project Presentation - Jeppiaar Engineering College
8/14/2019 Mudhra Presentation PDF
21/27
Based on the sheet-metal properties, a steel variety possessing sufficiently high RockwellHardness Number (RHN) is chosen. E.g.: for Mild Steel sheet metal, the recommendedsteel RHN is from 60-62.
Then, through carburizing process, Carbon is added in measured quantities so as toachieve a 1.5% - 2% concentration in the steel.
Subsequently, the steel is heated to 1100C, which causes a recrystallisation of the grainstructure of the steel resulting in new stress-free grain geometry. This causes core-hardening of the steel.
Now, the steel attains the required level of hardness and toughness. Further, the steel is
heated and air-annealed in order to soften it if so required.
Project Presentation - Jeppiaar Engineering College
8/14/2019 Mudhra Presentation PDF
22/27
Distance of separation between the Die and Punch.
Crucial for obtaining very high blanking accuracy.
For mild steel, the recommended clearance range is 15%-20%
of sheet thickness.
For harder steel variants, the clearance ranges from 20% to
30% of sheet thickness.
Project Presentation - Jeppiaar Engineering College
8/14/2019 Mudhra Presentation PDF
23/27
Blanking involves
a cutting or
shearing process
of the stamping
stock using shear
deformation
Project Presentation - Jeppiaar Engineering College
8/14/2019 Mudhra Presentation PDF
24/27
Project Presentation - Jeppiaar Engineering College
8/14/2019 Mudhra Presentation PDF
25/27
Project Presentation - Jeppiaar Engineering College
8/14/2019 Mudhra Presentation PDF
26/27
Maximum blanking force must be calculated beforehand in order
to determine the capacity of the press machine needed to perform
the blanking.
P = t * L * K1 * B
P = Blanking Force (kg-f)
t = Metal thickness (mm)
L = Total Length of all cuts (mm)
K1 = Correction Factor (0.8~1)B = Tensile Strength of metal (kg-f/mm
2)
Project Presentation - Jeppiaar Engineering College
8/14/2019 Mudhra Presentation PDF
27/27