Download - I. lkçN³nigEsVgyl;BI AutoCADtaksokhumkh.weebly.com/uploads/2/4/7/9/24798279/_auto_cad_2010.pdf.pdf- AutoCAD 2005 (R16.1) - March 2004 - AutoCAD 2006 (R16.2) - March 2005 - AutoCAD

EpñksMNg;sIuvilnigsßabtükmμ erobcMeday³eFag XIn 1

I. lkçN³nigEsVgyl;BI AutoCAD

1> niymn½y AutoCAD KWCakmμviFImYyEdleRbIsMrab;KUrbøg;GKar sßabtükmμ GKÁisnI FarasaRsþ

sMNg;sIuvil nig sMNg;ma:sIunenAelI Computer .rebobénkareRbI AutoCAD manEtmYyKt;. b:uEnþvaGacxusKña bnþicbnþÜceTAelIvis½ynimYy².

2>lkçN³Biessrbs;km μviFI - GacKUrrUbPaB)anl¥nigc,as;las; - gayRsYlkñúgkarEkERbb¤lubrUbPaB - cgcaM)anyUrnigrh½ykñúgeBlEtmYy - GacbgVilnigeFVIclnarUbPaB)anl¥ - GactMeLIgrUbPaBBitkñúglMhnigBRgIkbRgÜm - GaceGaysac; B_N nig Rsemal)any:agc,as; - Gacdak; Material eGayrUbPaBtamkarBit

3> karvivtþn_énkm μviFI - Version 1.0 (Release 1) - December 1982 - Version 1.2 (Release 2) - April 1983 - Version 1.3 (Release 3) - August 1983 - Version 1.4 (Release 4) - October 1983 - Version 2.0 (Release 5) - October 1984 - Version 2.1 (Release 6) - May 1985 - Version 2.5 (Release 7) - June 1986 - Version 2.6 (Release 8) - April 1987 - Release 9 - September 1987 - Release 10 - October 1988 - Release 11 - October 1990 - Release 12 - June 1992 (last release for Apple Macintosh ) - Release 13 - November 1994 (last release for Unix, MS-DOS and Windows 3.11) - Release 14 - February 1997 - AutoCAD 2000 (R15.0) - March 1999 - AutoCAD 2000i (R15.1) - July 2000 - AutoCAD 2002 (R15.6) - June 2001 - AutoCAD 2004 (R16.0) - March 2003 - AutoCAD 2005 (R16.1) - March 2004 - AutoCAD 2006 (R16.2) - March 2005 - AutoCAD 2007 (R17.0) - March 2006 - AutoCAD 2008 (R17.1) - March 2007 - AutoCAD 2009 (R17.2) - oct, 30, 2008 - AutoCAD 2010 (R8.0) - August, 19, 2009

4> RbePT Computers EdlGacdMeNIrkarkm μviFI)an *. AutoCAD 2010 Ca 2D


• Microsoft® Windows® XP Professional or Home edition (SP2 or later)

• Intel® Pentium® 4 or AMD Athlon® dual-core processor, 1.6 GHz or higher with SSE2 technology

• 2 GB RAM

• 1 GB free disk space for installation

• 1,024 x 768 VGA display with true color

• Microsoft® Internet Explorer® 7.0 or later

• Install from download, DVD, or CD

*. AutoCAD 2010 Ca 3D

• Intel Pentium 4 processor or AMD Athlon, 3 GHz or higher; Intel or AMD dual-core processor, 2 GHz or higher

• 2 GB RAM or greater

• 2 GB hard disk space available in addition to free space required for installation

• 1,280 x 1,024 32-bit color video display adapter (true color) 128 MB or greater, Microsoft® Direct3D® capable workstation class

5> rebobtMeLIgkmμviFI 1. ebIk File AutoCAD BI Drive or CD-ROM

2. Click Files Setup (Setup.exe)

3. Double Click on setup.exe


4. Install

5. Installation Product

6. Next

7. Accept

8. Next

9. Next


10. Configure

11. Tick Stand alone License -> Next

12. Tick Custom -> Next

13. Configuration Complete

14. Install and Waiting

15. Finish


6> karebIk AutoCAD 2010

rebobTI 1

bnÞab;BI)anbBa©Úlkm μ)anrYcral;enaH Icon rbs; AutoCAD )anelcecjelIpÞaMgrbs; Windows Gac Click BIrdgelI AutoCAD2010 rgcaMbnþic. rebobTI 2

Start -> Programs -> Autodesk -> AutoCAD 2010 -> AutoCAD 2010

7> Command and Coordinate System

7.1. Command:KWCabBa¢amYyeRbIsMrab;sresrGkSrkat;niggayRsYlkñúgkareRbIR)as;)an rh½ssßitenAEpñkxageRkaménépÞKUr.

cMNaM³CYnkaleKeRbIbBa¢anig Toolbars RsbeBlCamYyKñaedIm,IbegáInel,ÓnénkarKUrbøg;nig gaycgcaM)anyUr. ]TahrN¾³ Rectangle mYyGacvayCa Command: Rec nig Rectangle Toolbars

7.2. Coordinate System:KWCaRbBn½§Kl; 0 EdlbegáItedayviucT½r x nig y k¾CacMnucsMxan; mYykñúgkareRbIR)as;bøg;kñúglMhr .

Gab;sIus nig Gredaen Coordinate system EckecjCaBIrRbePTKW³

• Absolute Coordinate: RKb;cMnucrUbKWeFobeTAnwgKl; O (x=0 , y=0)

• Relative Coordinate: RKb;cMnucrUbKWeFobeTAnwgcMnuccugeRkayénKl; 0 mann½yfa³ (x=0, y=0) CacMnucfμImYyeTot.


7.3. karKUreRbIRbEvgnigmMu

eRkABIeRbI Coordinate system manviFImYyeTotKWeRbIRbEvgGgát;eFobCamYymMu . 8. erobcMeBlKUr

Units: KWCaxñatmYyénbNþaRbeTsEdleKniymeRbIR)aserog²xøÜn nig gayRsYlkñúgkar emIlelIpÞaMgénkarKUr.

cuc Format menu bars -> Units

Command: ddunits

Select Scroll elI Decimal

• Decimal : CaRbPaK (15.5000)

• Precision: karkMNt;cMnYnxÞg;xageRkayTsPaK (0.00)

• Millimeters: xñatRbEvg

• Engineering: Feet and decimal inches (1’- 3.5000’’) • Architectural: Feet, inches, fractional inches (1’- 31/2’’) • Fractional: Fractional Unit (15 1/2) • Scientific: Notation (1.5500E+01)

Select Scroll elI Decimal Degrees

• Decimal Degrees Display Partial degrees as decimals (90.00)

0,0 0,0 50

100,0150,5050,50

150 50

50,50

150 50

Absolute Coordinate Relative Coordinate

50


• Deg/Min/Sec Display Partial degree as minutes and seconds of an arc (90d0’0’’)

• Grads Display Partial degrees as grads (100.0000) • Radians Display Partial degrees as radians (1.5708) • Surveyor Display angles in surveyor units (N)

eRCIserIs Direction

Tick elI East

- Counter Clock wise: pÞúynwigRTnicnaLikar - Clock wise: RsbnwgRTnicnaLikar

9. kMNt;pÞaMgénkarKUr 1³1 • Limits ( Format ->Drawing Limits) • ON / OFF /< Lower Left Conner > < 0.000, 0.000>0,0 • Uper Right Conner < 420, 297 >:420,297

cMNaM³TMhMRkdaseRbIsBVéf¶

• A0 = 841 x 1189 • A1 = 841 x 594 • A2 = 420 x 594 • A3 = 420 x 297 • A4 = 210 x 297 • A5= 210 x 148 • A6= 105 x 148

10> TItaMg Mouse

Snap eRbIsMrab;cab;bnþén Object BImYyeTAmYyEdlmanlkçN³c,as;las;nigsuRkit.

0: East180: West

90: North

270: South

0,0 x

y

A3

420,297


Command: Snap Aspect / Snap Spacing or ON/ OFF/ Rotate / Style / < 1000> 100

• On = F9 eRbICMh‘anrbs; Mouse

• Off = F9 mineRbICMh‘anrbs; Mouse

• Rotate : CMh‘anrbs; Mouse edIreRTttammMukMNt;NamYy

• Aspect : rMkiltamTis x nig y xusKña • Horizontal = x • Vertical = y

• Style -> Standard /Isometric <s> I KUrtammMu 450

11. Grid Command: grid

Specify grid spacing(X) or [ON/OFF/Snap/Major/aDaptive/Limits/Follow /Aspect]<0.5000>: l00

Display grid beyond Limits [Yes/No] <No>: Y

• On =F7 bgðajRklacRkRtg; • Off = F7 minbgðajRklacRkRtg;

cMNaM³ Snap pøas;bþÚr Grid k¾pøas;bþÚrEdr Aspect: RbsinebItMél x nig y xusKñaeyIg)anragCactuekaNEkg 12> kMNt; Snap nig Grid

• Command: Dsettings rW ( Tools menu bars / Drafting Settings)

• Snap on (F9): TItaMg Mouse edIrtam Limits kMNt; - Snap x spacing: RbEvgG½kS x

- Snap y spacing: RbEvgG½kS y

• Grid on (F7): RbEvg Limits

- Grid x spacing: RbEvgG½kS x

- Grid y spacing: RbEvgG½kS y

- Isometric snap :KUrCalMhb¤mMu 450

- F5 pøas;bþÚrTisedA Mouse


• Dynamic input: sMrab;bgðajRbEvgeBleRbI Command

13> begáItkargarfμI eRbIsMrab;begáItpÞaMgkargarf μ IEdlBMuTak;TgCamYykargarcas;

Click File menu bars -> New ->start from scratch -> metric -> ok Ctrl+N -> start from scratch -> metric -> ok

14> rkSakargar rkSakargarTukedIm,IbnþnaeBleRkayeTotb¤rkSaCaÉksarTuksMrab;éf¶eRkaynigPsþútag

Click File menu bars -> save -> name files ->save Ctrl+s -> name files.dwg ->save

15> ebIkkargarcas; ehAkargarcas;mkbnþeTotb¤EkERbcMnucxøH²EdlRtUvpøas;bþÚr.

Click File menu bars -> open ->Directories -> name files -> open

16> ebIk Template

karebIképÞkargarEdlmanTMrg;Rsab; Click File menu bars -> New ->Acad.dwt -> Open


Ctrl+N -> Acad.dwt-> Open

Click File menu bars -> New ->use template -> ok Ctrl+N -> use Template -> ok

17> ebIk Wizard

karebIképÞkargarEdl)ankarkMNt;c,as;las;nigRtwmRtUv Click File menu bars -> New ->use wizard -> advanced setup

-> ok -> Tick Decimal ->Next -> Tick Decimal Degrees ->Next


-> Tick East ->Next -> Tick Counter Close wise ->next -> Tick size paper ->Finish

18> karcakecj bnÞab;BI)aneFIVkarb¤cg;bBa©b;kic©karenaHeKRtUvcakecjBIkmμviFI nig biTma:sIunedIm,IrkSarkar

)at;bg;b¤ Error files. Click File menu bars -> exit &Close Ctrl+Q

19> EsVgyl;BI Interface

TaMgenHCaKnøiHmYykñúgkardwgnigyl;énkareRbIR)as;bBa¢arbs;va. -

OObbjjeecctt PPrrooppeerrttiieess TToooollbbaarr

SSttaannddaarrdd TToooollbbaarr

PPuullll--ddoowwnn MMeennuuss

DDrraaww TToooollbbaarr

SSoolliidd eeddiittiinngg TToooollbbaarr

GGrraapphhiiccss CCuurrssoorr

GGrraapphhiiccss WWiinnddooww

CCoommmmaanndd LLiinnee

CCuurrssoorr CCoooorrddiinnaattee DDiissppllaayy


II. rebobeRbI 2D Command 1. Command: Mvsetup

eRbIsMrab;kMNt;RbePTRkdasEdlman Scale nigTMhMc,as;las;eTAtambøg;. Command: Mvsetup

Initializing... Enable paper space? [No/Yes] <Y>: n Enter units type[Scientific/Decimal/Engineering/Architectural/Metric]:m Metric Scales ================= (5000) 1:5000 (2000) 1:2000

(1000) 1:1000 (500) 1:500

(200) 1:200 (100) 1:100 (75) 1:75 (50) 1:50 (20) 1:20 (10) 1:10 (5) 1:5 (1) FULL

Enter the scale factor: 100 Enter the paper width: 210 Enter the paper height: 297

mann½yfaeyIgeRbIR)as;RbePTRkdas A4 elImaRtdæan 1/100 . 2. Command: Line (Draw menu bars -> Line)

eRbIsMrab;;KUrbnÞat;EdlGgát;nimYy²BMu)anCab;KñaeT . k> KUrctuekagEkgmYy Command: L

LINE Specify first point: 50, 60 Specify next point or [Undo]: @100, 0 Specify next point or [Undo]: @0, 50 Specify next point or [Close/Undo]: @-100, 0 Specify next point or [Close/Undo]: C C mann½yfaeGaybnÞat;cugeRkayrt;eTArkedIménbnÞat;vijb¤biT Object.

x> KUrbnÞat;edayeFobnigmMu

Command: L LINE Specify first point: 200,100 Specify next point or [Undo]: @200<45


3. Command: Trace

eRbIsMrab;KUrbnÞat;EdlmankMras;. Command: trace

Specify trace width <10>:10 Specify start point: click Specify next point: 100 Specify next point:

4. Command: Poly line (Draw menu bars -> Poly line)

eRbIsMrab;KUr bnÞat; FñÚr EdlmankMras;nigGacKUrpøas;bþÚrBIbnÞat;eTAExSekagedayGgát;TaMg Gs;Cab;Kña.

k> KUrctuekaNEkg Command: PL Specify start point: 500,300 Current line-width is 0.0000 Specify next point or [Arc/Half width/Length/Undo/Width]: @100, 0 Specify next point or [Arc/Close/Half width/Length/ Undo/Width]: @0, 50 Specify next point or [Arc/Close/Half width/Length/ Undo/Width]: @-100, 0 Specify next point or [Arc/Close/Half width/Length/ Undo/Width]: @0,-50

x> KUrctuekaNEkgmankMras;

Command: PL PLINE Specify start point: 200,300 Current line-width is 0.0000

Specify next point or [Arc/Half width/Length/Undo/Width]: W Specify starting width <0.0000>: 10 Specify ending width <10.0000>: 10 Specify next point or [Arc/Half width/Length/Undo/Width]: @100, 0 Specify next point or [Arc/Close/Half width/Length/ Undo/Width]: @0, 50 Specify next point or [Arc/Close/Half width/Length/ Undo/Width]: @-100, 0 Specify next point or [Arc/Close/Half width/Length/ Undo/Width]: @0,-50


K> KUrG½kS Command: Pl Specify start point: 200,300 Current line-width is : 0.00 Specify next point or [Arc/Half width/Length/Undo/Width]: A Specify endpoint of arc or [Angle/CEnter/Direction/Half width/Line/Radius/Second pt/Undo/ Width]: 200 Specify endpoint of arc or [Angle/CEnter/Close/Direction/Half width/Line/Radius/Second pt/Undo /Width]: 200 Specify endpoint of arc or [Angle/CEnter/Close/Direction/Half width/Line/Radius/Second pt/Undo/ Width]: 200

5. Command: Line type (Format menu bars -> line type)

eRbIsMrab;ehAykRbePTbnÞat;mkeRbItamtMrUvkar . Command: lt

-> Load…

-> Right click -> select all -> ok -> ok

viFImYyeToteyIgRKan;EtcucelI Tools property -> by layer TI2 -> other…


-> Other…

-> Load -> Right click -> select all

-> Ok -> ok

6. Command: Line type scale

eRbIsMrab;dak;emKuNeGayKMlaténbnÞat; . Command: lts

LTSCALE Enter new linetype scale factor <1.0000>: 20 emKuN Regenerating model.

7. Command: Color (Format menu bars -> color)

eRbIsMrab;dak;BN’eGaybnÞat;nig Object epSg²eTot . Command: color

viFImYyeToteyIgRKan;EtcucelI Tools property -> by layer TI1 -> Color

8. Command: Line weight (Format menu bars ->line weight)

eRbIsMrab;dak;kMras;eGaybnÞat;nig Object epSg²eTot . Command: lw


viFImYyeToteyIgRKan;EtcucelI Tools property -> by layer TI3 -> line weight…

9. Command: Copy clip (Edit menu bars -> copy) (Ctrl+c)

eRbIsMrab;ftcMlgrUbBI Files mYyeTA Files mYyeTot . Command: copy clip

Select objects: click object Select objects: Right click

10. Command: Paste (Edit menu bars -> paste) (Ctrl+v)

eRbIsMrab;yk Object Edl)anftcMlgehIy . Command: pasteclip

Specify insertion point: Click TItaMgEdlTuk 11. Command: Cut (Edit menu bars -> Cut) (Ctrl+x)

eRbIsMrab;ftcMlg Object eday Object cas;KW)anlubecal. Command: cutclip

Select objects: click object Select objects: Right click

12. Command: Close (Files menu bars -> Close) (Ctrl+F4)

eRbIsMrab;biT object. Command: Close

13. Command: Exit (Files menu bars -> exit) (Alt+F4)

eRbIsMrab;cakecjBIkmμviFI. Command: exit

14. Command: BlipMode eRbIsMrab;biTebIksBaØabUkeBlkMBugKUr Command: blipmode

Enter mode [ON/OFF] <OFF>: ON


15. Command: Redraw (View menu bars -> Redraw) eRbIsMrab;sMGatépÞ Screen Command: redraw

16. Command: Regen, Regen all (View menu bars -> Regen, Regen all) eRbIsMrab;karBRgIkbRgÜmrUb nig eFVIeGayExSekagmanragmUlvij Command: Regenall 17. Command: Erase (Modify menu bars -> Erase)

eRbIsMrab;lub Object ecal . Command: E

Select objects: Click object Select objects: Right Click

kar Select object manBIrrebobKW³ - TI1 kar Select BIeqVgeTAsþaM

Select enHKW Select edaykat;TaMgGs;eTIbGaclub)anTaMgGs; - TI2 kar Select BIsþaM eTAeqVg Select enHKW Select RKan;Etkat;EpñkmYyén Object KWlub)anTaMgGs;

18. Command: Lengthen (Modify menu bars -> lengthen) eRbIsMrab;bEnßm bnßy srub nigkat;; bnÞat; rW ExSekag CaPaKry. karbEnßmbnÞat; Command: Len

LENGTHEN Select an object or [DElta/Percent/Total/DYnamic]: DE Enter delta length or [Angle] <100.0000>: 100 Select an object to change or [Undo]: Click Object (Add Line) Select an object to change or [Undo]: Right Click (Continue or Finish)

karbEnßmExSekag Command: Len

LENGTHEN Select an object or [DElta/Percent/Total/DYnamic]: De Enter delta length or [Angle] <100.0000>: A Enter delta angle <0>: 30 Select an object to change or [Undo]: Click Object Select an object to change or [Undo]: Right Click


kat;bnßyCaPaKry Command: len

LENGTHEN Select an object or [DElta/Percent/Total/DYnamic]: P Enter percentage length <100.0000>: 50 Select an object to change or [Undo]: Click Object Select an object to change or [Undo]: Right Click

srub Command: len

LENGTHEN Select an object or [DElta/Percent/Total/DYnamic]: T Specify total length or [Angle] <1.0000)>: 1000 Select an object to change or [Undo]: Click Object Select an object to change or [Undo]: Right Click

karbEnßmnigbnßytamcitþ Command: len

LENGTHEN Select an object or [DElta/Percent/Total/DYnamic]: DY Select an object to change or [Undo]: Click Object

Specify new end point: 100 RbEvgbEnßm 19. Command: Donut (Draw menu bars -> donut)

eRbIsMrab;KUrrgVg;EdlmanépÞnigkg;Lan. Command: do

DONUT Specify inside diameter of donut <0.5000>: 0 Specify outside diameter of donut <1.0000>: 20 Specify center of donut or <exit>: Click Point Specify center of donut or <exit>: Right Click

20. Command: Fill (Tools menu bars-> option -> Apply solid fill) eRbIsMrab;dak;nigbiTépÞrbs; Donut b¤ Hatch.

Command: fill Enter mode [ON/OFF] <ON>: OFF

Automatic save to enHCakEnøgTuk On: ebIk Off: biT


Not: used Command: Re 21. Command: Offset (Modify menu bars -> Offset)

eRbIsMrab;ftcMlg object edaykMNt;RbEvgc,as;las;. Command: o

OFFSET Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0 Specify offset distance or [Through/Erase/Layer] <Through>: 100 Select object to offset or [Exit/Undo] <Exit>: Click Object Specify point on side to offset or [Exit/Multiple/Undo] <Exit>: Click Select object to offset or [Exit/Undo] <Exit>:

-Exit: ecjBI Command

-Multiple: ftcMlgcMnYneRcIn 22. Command: MOVE (Modify menu bars -> Move)

eRbIsMrab;pøas;bþÚrTItaMgrbs; Object . Command: M

MOVE Select objects: Specify opposite corner: Click object Select objects: Right Click Specify base point or [Displacement] <Displacement>: Click Specify second point or<use first point as displacement>: Click

23. Command: Zoom (View menu -> Zoom)

eRbIsMrab;BRgIkbRgYm Object. k> Zoom enAkñúg Screen EtmYy Command: Z

ZOOM Specify corner of window, enter a scale factor (nX or nXP), or [All/Center/Dynamic/Extents/Previous/Scale/Window]<Realtime>: A

x> Zoom cMnuckNþalén Screen Command: Z

ZOOM Specify corner of window, enter a scale factor (nX or nXP), or [All/Center/Dynamic/Extents/Previous/Scale/Window]<Realtime>: C


Specify center point: Click Enter magnification or height <182.5529>: Click

Specify second point: Click

K> BRgIkrUbPaBeGayeBj Screen Command: Z

ZOOM Specify corner of window, enter a scale factor (nX or nXP), or [All/Center/ Dynamic/ Extents/ Previous/ Scale/ Window] <real time>: E

X> Rtlb;mkeRkayvij Command: Z

ZOOM Specify corner of window, enter a scale factor (nX or nXP), or [All/Center/Dynamic/Extents/Previous/Scale/Window]<realtime> : P

g> kareRbIemKuN Command: Z

ZOOM Specify corner of window, enter a scale factor (nX or nXP), or [All/Center/Dynamic/Extents/Previous/Scale/Window]<Realtime>: S Enter a scale factor (nX or nXP): 2 xp

c> bgðajCalkçN³ Window Command: Z

ZOOM Specify corner of window, enter a scale factor (nX or nXP), or [All/Center/Dynamic/Extents/Previous/Scale/Window]<Realtime>: W Specify first corner: 20 Specify opposite corner: 50

q> karBRgIkbRgYm (+) sMrab;BRgIk Object

(-) sMrab;BRgYm Object

C> Exit


23. Command: Object Snap (Tools menu bars -> Drafting Settings)

eRbIsMrab;kMNt;cMnuccab;rbs; Object Command: Os

- Temporary Tracking point: eRbIsMrab;cab;cMnucbnþrbs; Object

- Snap From: eRbIsMrab;cab;cMnuceFobnigG½kS x, y

- End Point: eRbIsMrab;cab;cMnuccugrbs; Object

- Midpoint: eRbIsMrab;cab;cMnuckNþalrbs;; Object

- Intersection: eRbIsMrab;cab;cMnucRbsBVrbs;; Object

- Apparent Intersection: eRbIsMrab;cab;cMnuckat;Kñarbs;; Object

- Extension: eRbIsMrab;cab;cMnucmYyedaykMNt;RbEvgc,as;las;

- Center: eRbIsMrab;cab;cMnucp©itrgVg;

- Quadrant: eRbIsMrab;cab;cMnucrgVg;EckCabYn

- Tangent: eRbIsMrab;cab;cMnucb:HrgVg;

- Perpendicular: eRbIsMrab;cab;cMnucEkg


-Nod: eRbIsMrab;cab;cMnucrbs; Point

-Insert: eRbIsMrab;cab;cMnuc Block

-Nearest: eRbIsMrab;cab;cMnucCitbMput

-Parallel: eRbIsMrab;;cMnucRsb

24. Command: Rectangle (Draw menu bars -> Rectangle)

eRbIsMrab;KUrctuekaNEkg. k> KUrctuekaNEkgFm μta

Command: REC RECTANGLE Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: Click Point Specify other corner point or [Dimensions]: Click Point

x> KUrctuekaNEkgEdlRcitRCug

Command: REC RECTANGLE Current rectangle modes: Chamfer=10.0000 x 30.0000 Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/ Width]: C Specify first chamfer distance for rectangles <10.0000>:10 Specify second chamfer distance for rectangles <30.0000>: 20 Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/ Width]: Click Pont Specify other corner point or [Dimensions]: Click Pont

K> KUrctuekaNEkgEdlmanRCugmUl

Command: REC RECTANGLE Current rectangle modes: Chamfer=10.0000 x 10.0000 Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/ Width]: F


Specify fillet radius for rectangles <10.0000>: 20 ; Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/ Width]: Click Point Specify other corner point or [Dimensions]: Click Point

X> KUrctuekaNEkgEdlmankMras;

Command: REC RECTANGLE Current rectangle modes: Width=2.0000 Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/ Width]: W Specify line width for rectangles <2.0000>: 10 Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/ Width]: Click Point Specify other corner point or [Dimensions]: Click Point

25. Command: Circle (Draw Menu bars -> Circle)

eRbIsMrab;KUrrgVg;. k> KUrrgVg;cab;epþImBIp©wt Command: C

CIRCLE Specify center point for circle or [3P/2P/Ttr (tan tan

radius)]: Click cMnucTI1 Specify radius of circle or [Diameter]: Click cMnucTI2

x> karKUredayeRbIBIrcMnuc eKGacykcMnucBIr CaCMnYyedIm,IKYrrgVg;ehIycMnucenaHGacCa cugbnÞat; rW CacMnucd¾éTeTotk_ )an.

Command: C CIRCLE Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: 2 Specify first end point of circle's diameter: Click point Specify second end point of circle's diameter: Click point


K> KUrrgVg;edayeRbIbIcMnuc Command: C

CIRCLE Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: 3p Specify first point on circle: Click point Specify second point on circle: Click point Specify third point on circle: Click point

X> KUrrgVg;edayb:HBIrcMnucnigkaMrgVg; Command: C

CIRCLE Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: Ttr

Specify point on object for first tangent of circle: Click b:HTI1 Specify point on object for second tangent of circle: Click b:HTI2 Specify radius of circle <6.0806>: 50

g> KUrrgVg;edayb:HbIcMnuc

Draw Menu->Circle->Tan Tan Tan Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: _3p Specify first point on circle: Click Object

b:HcMnucTI1 Specify second point on circle: Click object b:HcMnucTI2 Specify third point on circle: Click Object b:HcMnucTI3

26. Command: Arc (Draw Menu bar - > Arc)


eRbIsMrab;KUrExSekag . k> KUrGgát;FñÚredayeRbIbIcMnuc

Command: arc

Specify start point of arc or [Center]: Click cMnucTI1 Specify second point of arc or [Center/End]: Click cMnucTI2 Specify end point of arc: Click cMnucTI3

x> KUrGgát;FñÚredayeRbIcMnuckNþalnigmMubgVil Command: arc

Specify start point of arc or [Center]: c Specify center point of arc: click point Specify start point of arc: click point Specify end point of arc or [Angle/chord Length]: A Specify included angle: 180

X> KUrGgát;FñÚredayeRbIBIrcMnucnigkaM Command: _arc Specify start point of arc or [Center]: Click Point Specify second point of arc or [Center/End]: _e Specify end point of arc: Click Point Specify center point of arc or [Angle/Direction/Radius]: _r Specify radius of arc: 60

- 3 Point KWCakarKUrFñÚredaydwg3cMnuc

- Start, Center, End KWCakarKUrFñÚredaydwgcMnuccab;epþIm kNþalnigbBa©b; - Start, Center, Angle KWCakarKUrFñÚredaydwgcMnuccab;epþIm kNþalnigmMu - Start, Center, Length KWCakarKUrFñÚredaydwgcMnuccab;epþIm kNþalnigRbEvg

- Start, End, Angle KWCakarKUrFñÚredaydwgcMnuccab;epþIm bBa©b;nigmMu


- Start, End, Direction KWCakarKUrFñÚredaydwgcMnuccab;epþIm bBa©b;nigmMueFob

- Start, End, Radius KWCakarKUrFñÚredaydwgcMnuccab;epþIm bBa©b;nigkaMrgVg; - Center, Start, End KWCakarKUrFñÚredaydwgcMnuckNþal cMnuccab;epþIm nigbBa©b; - Center, Start, Angle KWCakarKUrFñÚredaydwgcMnuckNþal cMnuccab;epþIm nigmMu - Center, Start, Length KWCakarKUrFñÚredaydwgcMnuckNþal cMnuccab;epþImnigRbEvg

- Continue bnþ 27. Command: Point (Draw Menu bars -> Point)

eRbIsMrab;KUrcMnucBugehIyTMhMxusKñatamkarkMNt;TukCamun. Command: point

Current point modes: PDMODE=0 PDSIZE=0.0000 Specify a point: Click Point

28. Point style (Format Menu bars -> Point)

eRbIsMrab;kMNt;RbePTrbs; Point EdleyIgcg;)an. Command: ddptype

RbsinebIeyIgcg;)an Style NamYyRtUveRbI Left Mouse cuceGaycM Point EdleyIgcg; )an .

29. Command: Polygon (Draw Menu bars -> Polygon)

eRbI;sMrab;KUrBhuekaN. cMnYnRCugeRcInbMputKW 1024.

k> KUrBhuekaNcarikkñúgrgVg;


Command: pol POLYGON Enter number of sides <4>: 6 Specify center of polygon or [Edge]: Click Point Enter an option [Inscribed in circle/Circumscribed about circle] <I>: I Specify radius of circle: 60

x> KUrBhuekaNcarikeRkArgVg; Command: Pol

POLYGON Enter number of sides <6>: 6 Specify center of polygon or [Edge]: Click Point Enter an option [Inscribed in circle/Circumscribed about circle] <I>: c Specify radius of circle: 70

K> KUrBhuekaNedayeRbIRbEvgRCug Command: pol

Enter number of sides <1024>: 8 Specify center of polygon or [Edge]: e Specify first endpoint of edge: Click Point Specify second endpoint of edge: 100

30. Command: Construction Line (Draw Menu bars -> Construction Line)

eRbIsMrab;KUrbnÞat;KμanEdnkMNt;. k> KUrbnÞat;edayeRbIBIrcMnuc

Command: xline Specify a point or [Hor/Ver/Ang/Bisect/Offset]: Click Point Specify through point: Click Point


x> KUrbnÞat;CaGab;sIus Command: xline

Specify a point or [Hor/Ver/Ang/Bisect/Offset]: V Specify through point:

K> KUrbnÞat;CaGredaen

Command: xline Specify a point or [Hor/Ver/Ang/Bisect/Offset]: V Specify through point: Click Point

X> KUrbnÞat;CamMu Command: xline

Specify a point or [Hor/Ver/Ang/Bisect/Offset]: a Enter angle of xline (0) or [Reference]: 45 Specify through point: Click point

g> KUrbnÞat;eFobmMu

Command: xl XLINE Specify a point or [Hor/Ver/Ang/Bisect/Offset]: b Specify angle vertex point: 45 Specify angle start point: 45 Specify angle end point: 45 Specify angle end point: Click Point Specify angle end point:

31. Command: Ray (Draw Menu bars -> Ray)

eRbIsMrab;KUrbnÞat;EdlmanEdnkMNt;Bak;kNþal. Command: ray

Specify start point: Click Point Specify through point: Click Point


32. Command: Multi line (Draw Menu bars ->Multiline)

eRbIsMrab;KUrbnÞat;eRcIn.

k> KUrbnÞat;eRcInedaykMNt;TMhM Command: ml

MLINE Current settings: Justification = Top, Scale = 200.00, Style = STANDARD Specify start point or [Justification/Scale/STyle]: s Enter mline scale <200.00>: 200 Current settings: Justification = Top, Scale = 200.00, Style = STANDARD Specify start point or [Justification/Scale/STyle]: Click Point Specify next point: Click Point Specify next point or [Undo]:

x> KUrbnÞat;eRcInedayeRbIxagelI Command: ML

Current settings: Justification= Top, Scale = 20.00, Style = STANDARD Specify start point or [Justification/Scale/STyle]: s Enter mline scale <20.00>: 200 Current settings: Justification = Top, Scale = 200.00, Style = STANDARD Specify start point or [Justification/Scale/STyle]: j Enter justification type [Top/Zero/Bottom] <top>: T Current settings: Justification = Top, Scale = 200.00, Style = STANDARD Specify start point or [Justification/Scale/STyle]: Click Point Specify next point: Click Point Specify next point or [Undo]: Enter

K> KUrbnÞat;eRcInedayeRbIxageRkam Command: ml

MLINE Current settings: Justification = Top, Scale = 200.00, Style = STANDARD Specify start point or [Justification/Scale/STyle]: j Enter justification type [Top/Zero/Bottom] <top>: b Current settings: Justification = Bottom, Scale = 200.00, Style = STANDARD


Specify start point or [Justification/Scale/STyle]: Click Point Specify next point: Click Point

X> KUrbnÞat;eRcInedayeRbIkNþal Command: ml

MLINE Current settings: Justification = Bottom, Scale = 200.00, Style = STANDARD Specify start point or [Justification/Scale/STyle]: j Enter justification type [Top/Zero/Bottom] <bottom>: z Current settings: Justification = Zero, Scale = 200.00, Style = STANDARD Specify start point or [Justification/Scale/STyle]: Click Point Specify next point: Click Point Specify next point or [Undo]: Enter

g> karkMNt;kñúg Menu bars

- Set Current: sMrab;kMNt;eQ μaHcugeRkay

- Name: sMrab;dak;eQ μaHfμI - Modify: sMrab;EkERb - Rename: bþÚreQ μaH - Delete: sMrab;lub - Description: sMrab;erobrab; - Save: rkSaTuk - Add: sMrab;bEnßmbnÞat; - OK, Cancel

- Delete sMrab;lub


- Offset sMrab;kMNt;KMlat

- Color dak;B’NbnÞat; - Line type sMrab;kMNt;RbePTbnÞat; .

33. Command: Sketch

eRbIsMrab;KUrxVasb¤KUrKμaneRBognigxñatRtwmRtUveLIy. Command: Sketch

Record increment <0>: 0.5 Sketch. Pen eXit Quit Record Erase Connect. <Pen down> <Pen up> *Cancel*

34. Command: Copy (Modify Menu bars -> Copy)

eRbIsMrab;ftcMlg Object. k> Single Copy

Command: Co COPY Select objects: Click Object Select objects: Right Click Specify base point or displacement, or [Multiple]: Click Object Specify second point Of displacement or <use first point as

displacement>: Click Object;

x> Multi Copy

Command: Co COPY Select objects: Click Object Select objects: Click Object Specify base point or displacement, or [Multiple]: M Specify base point: Click Object Specify second point of displacement or <use first Point as displacement>: Click Object Specify second point of displacement or <use first point as displacement>: Click Object Specify second point of displacement or first point as displacement>: Click Object Specify second point of displacement or <use first point as displacement>: Click Object


35. Command: Array (Modify Menu bars -> array)

eRbIIsMrab;ftcMlg Object EdlmanlkçN³CaCYr CargVg;nigmMutamkarkMNt;RbEvgCamun.

k> ftcMlgCa Rectangular array

ftcMlgCaCYrmanbIrKW CYredk (Rows)

CYrQr (Columns) mMu (Angle)

- Select Objects sMrab; Click rUb - Rows cMnYnCYredk - Columns cMnYnCYrQr - Rows Offset RbEvgKMlatBI Row mYyeTA Row mYy - Column Offset RbEvgKMlatBI Column mYyeTA Column mYy - Angle of array bgVil Object tammuMkMNt;

x> ftcMlgCargVg;


eRbIsMrab;ftcMlg Object tamlkçN³CargVg;nigcMnYnEdl)ankMNt;.

- Center point: cMnucp©wtEdlRtUvbgVil - Select object: Click rUb - Total number of items: cMnYn Object EdlcMlg

- Angle to fill: cMnYnmMubgVil - Ok: yl;RBm

36. Command: Mirror (Modify Menu bars -> Mirror)

eRbIsMrab;qøúH Object edaymancMnucG½kSeFobmYyCaeKal. Command: mi MIRROR Select objects: Click Object Select objects: Right Click Specify first point of mirror line: Click Point Specify second point of mirror line: Click Point Erase source objects? [Yes/No] <N>: Enter

37. Command: Rotate (Modify Menu bars ->Rotate)

eRbIsMrab;bgVil Object . k> kareRbImMu


Command: Ro ROTATE Select objects: Click Object Select objects: Right Click Specify base point: Click object Specify rotation angle or [Reference]: 45

x> kareRbI Reference

Command: Ro ROTATE Current positive angle in UCS: ANGDIR=counter clock wise ANGBASE=0 Select objects: Click Object Select objects: Right Click Specify base point: Click Point Specify rotation angle or [Copy/Reference] <0>: r Specify the reference angle <0>: 0 Specify the new angle or [Points] <0>: 60

38. Command: Extend (Modify Menu bars -> Extend)

eRbIsMrab;BnøÚtbnÞat;eTAtamkarkMNt;.mandUcCa Command: Line, Poly line, Arc l. k> BnøÚtmþgmYy

Command: Ex Select objects: Click Object Select objects: Right Click Select object to extend or shift-select to trim or [Project/Edge/ Undo]: Click Object

x> BnøÚtmþgeRcIn

Command: Ex Select objects: Click Object Select object to extend or shift-select to trim or [Project/Edge/ Undo]: F First fence point: Click Object Specify endpoint of line or [Undo]: Click Object Specify endpoint of line or [Undo]: Click Object Select object to extend or shift - select to trim or [Project/Edge/ Undo]: Enter


39. Command: Trim (Modify Menu bars -> Trim)

eRbIsMrab;kat; Object eGay)anesμ IredayeFobeTAnigbnÞat;eKalNamYy. k> Trim mþgmYy

Command: Tr Select objects: Click Object Select objects: Right Click Select object to trim or shift - select to extend or [Project/ Edge/ Undo]: Click Object Select object to trim or shift - select to extend or [Project/Edge/ Undo]: Click Object Select object to trim or shift - select to extend or [Project/Edge/ Undo]: Enter

x> Trim mþgeRcIn

Command: Tr Select objects: Click Object Select object to trim or shift - select to extend or [Project/Edge/ Undo]: F Specify endpoint of line or [Undo]: Click Object Specify endpoint of line or [Undo]: Click Object Specify endpoint of line or [Undo]: Click Object Specify endpoint of line or [Undo]: Click Object Select object to trim or shift - select to extend or [Project/Edge/ Undo]: Enter

40. Command: Fillet (Modify Menu bar -> Fillet)

eRbIsMrab;eFVIeGayRCugmanragmUlehIyRCugrbs;vaGacCa Line, Poly Line l.


k>karkMNt;kaM Command: F

FILLET Current settings: Mode = TRIM, Radius = 0.0000 Select first object or [Poly line /Radius/Trim/mUltiple]: R Specify fillet radius <0.0000>: 6 Select first object or [Poly line/Radius/Trim/mUltiple]: Click Object Select second object: Click Object

x> Ca Poly line Command: F

FILLET Current settings: Mode = TRIM, Radius = 0.0000 Select first object or [Undo/Poly line/Radius/Trim/Multiple]: R Specify fillet radius <0.0000>: 5 Select first object or [Undo/Poly line/Radius/Trim/Multiple]: P Select 2D poly line: Click Object 4 lines were filleted

K> CacMnYneRcIn Command: F

FILLET Current settings: Mode = TRIM, Radius = 5.0000 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: R Specify fillet radius <5.0000>: 20 Select first object or [Undo/Polyline/Radius/Trim/Multiple]: m Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Click Select second object or shift-select to apply corner: Click Object Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Click Select second object or shift-select to apply corner: Click Object Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Enter


41. Command: Chamfer (Modify Menu bars -> Chamfer)

eRbIsMrab;RcibRCugén Object Edl)ankMNt;c,as;las; . k> karkMNt;RbEvg

Command: Cha CHAMFER (TRIM mode) Current chamfer Dist1 = 0.0000, Dist2 = 0.0000 Select first line or [Poly line /Distance/Angle/Trim/Method/ mUltiple]: D Specify first chamfer distance <0.0000>: 1000 Specify second chamfer distance <4.0000>: 1000 Select first line or [Poly line/Distance/Angle/Trim/Method/ mUltiple]: Click Object Select second line: Click Object

x> karkMNt;mMu

Command: Cha CHAMFER (TRIM mode) Current chamfer Dist1 = 4.0000, Dist2 = 3.0000 Select first line or [Poly line/Distance/Angle/Trim/Method/ mUltiple]: A Specify chamfer length on the first line <0.0000>: 1000 Specify chamfer angle from the first line <0>: 45 Select first line or [Poly line/Distance/Angle/Trim/Method/ mUltiple]: Click Object Select second line: Click Object

K> Ca Poly line Command: CHA

CHAMFER (TRIM mode) Current chamfer Dist1 = 20.0000, Dist2 = 20.0000 Select first line or [Undo/Polyline/Distance/Angle/Trim/mEthod/ Multiple]: D Specify first chamfer distance <20.0000>: 1000 Specify second chamfer distance <20.0000>: 1000 Select first line or [Undo/Polyline/Distance/Angle/Trim/mEthod/ Multiple]: p Select 2D poly line: Click Object 4 lines were chamfered

X> karRcitmþgcMnYneRcIn


Command: Cha CHAMFER (TRIM mode) Current chamfer Dist1 = 20.0000, Dist2 = 20.0000 Select first line or [Undo/Polyline/Distance/Angle/Trim/mEthod/ Multiple]: A Specify chamfer length on the first line <0.0000>: 1000 Specify chamfer angle from the first line <0>: 45 Select first line or [Undo/Polyline/Distance/Angle/Trim/mEthod/ Multiple]: m Select first line or [Undo/Polyline/Distance/Angle/Trim/mEthod/ Multiple]: Click Object Select second line or shift-select to apply corner: Click Object Select first line or [Undo/Polyline/Distance/Angle/Trim/mEthod/ Multiple]: Click Object Select second line or shift-select to apply corner: Click Object Select first line or [Undo/Polyline/Distance/Angle/Trim/mEthod/ Multiple]: enter

42. Command: Explode (Modify Menu bars -> Explode)

eRbIsMrab;bMEbk Object eGayeTACa Segments tUc². Object EdlGac bMEbk)andUcCa Block, Region, Poly line.

Command: X EXPLODE Select objects: Click Point Select objects: Right Click

43. Command: Scale (Modify Menu bars -> Scale)

eRbIsMrab;BRgIknigbRgYm Object edayeRbIemKuNnigeRbITMhMeFob. k> karkMNt;emKuN

Command: Sc SCALE Select objects: Click Object Select objects: Right Click Specify base point: Click Point Specify scale factor or [Reference]: 100


x> karkMNt;emKuN Command: Sc

SCALE Select objects: Click Object Select objects: Right Click Specify base point: Click Point Specify scale factor or [Reference]: R Specify reference length <1.0000>: 1000 Specify new length or [Points] <1.0000>: 5000

44. Command: Divide (Draw Menu bars -> Point -> Divide)

eRbIsMrab;edAcMnuc rW EckcMnucenAelI Object . k> EckCacMnuc

dMbUgeyIgRtUveRCIserIs Point Style Camunsin . Command: Div

DIVIDE Select object to divide: Click Object Enter the number of segments or [Block]: 4

x> EckCacMnYnEdl)anbegáItTuk

dMbUgeyIgRtUvbegáIt Block mYyEdleyIgcg;eRbICamYy Divide CamunsineTIbeK eRbI Divide Command )an.

Command: Div DIVIDE Select object to divide: Click Object Enter the number of segments or [Block]: B Enter name of block to insert: khin Align block with object? [Yes/No] <Y>: Y Enter the number of segments: 4

K> karEckedayminbgVi Command: Div

DIVIDE Select object to divide: Click Object Enter the number of segments or [Block]: B Enter name of block to insert: khin


Align block with object? [Yes/No] <Y>: N Enter the number of segments: 10

45. Command: Measure (Draw Menu bars -> Point -> Measure)

eRbIsMrab;EckRbEvgGgát;EdlenAelI Object . k> EckCacMnuc Command: Me

Select object to measure: Click Object Specify length of segment or [Block]: 100

x> EckCacMnYnEdl)anbegáItTuk Command: Me

MEASURE Select object to measure: Click Object Specify length of segment or [Block]: B Enter name of block to insert: khin Align block with object? [Yes/No] <Y>: Y Specify length of segment: 100

46. Command: Units (Format Menu bars -> Units)

eRbIsMrab;kMNt;xñatkñúgeBlKUr. xñatkñugRsukEx μreKyk Decimal nigTisedAmMu eKyk Decimal Degrees.

Command: units

RsbRTnicnaLi


47. Command: Boundary (Draw Menu bars -> Boundary)

eRbIsMrab;begáIt Object eGaymanépÞnigsac;.

Command: Bo BOUNDARY Select internal point: Selecting everything... Selecting everything visible... Analyzing the selected data... Analyzing internal islands... Select internal point: Click Center Point BOUNDARY created 1 poly line

begáItehIyRtUveRbI Command: Move edIm,IykrUbecj

48. Command: Area (Tools Menu bars -> Inquiry -> Area)

eRbIsMrab;KitRkLaépÞnigbrimaNrbs; Object . k> KNnaRkLaépÞ

Command: aa AREA Specify first corner point or [Object/Add/Subtract]: O Select objects: Click Object Area = 100, Perimeter = 40


x> KNnaRkLaépÞbEnßm

Command: aa AREA Specify first corner point or [Object/Add/Subtract]: a Specify first corner point or [Object/Subtract]: o (ADD mode)Select objects: Click Object Area = 2500.0000, Perimeter = 200.0000 Total area = 2500.0000 (ADD mode) Select objects: Click object Area = 1600.0000, Perimeter = 160.0000 Total area = 4100.0000 (ADD mode) Select objects: Specify first corner point or [Object/Subtract]:

K> KNnaRkLaépÞbnßy Command: aa

AREA Specify first corner point or [Object/Add/Subtract]: s Specify first corner point or [Object/Add]: a Specify first corner point or [Object/Subtract]: o (ADD mode) Select objects: Click Object Area = 2500.0000, Perimeter = 200.0000 Total area = 2500.0000 (ADD mode) Select objects: Right Click Specify first corner point or [Object/Subtract]: s Specify first corner point or [Object/Add]: o (SUBTRACT mode) Select objects: Click Object Area = 1600.0000, Perimeter = 160.0000 Total area = 900.0000 (SUBTRACT mode) Select objects: Specify first corner point or [Object/Add]: Enter

TI1 TI2


49. Command: ID Point (Tools Menu bars -> Inquiry -> ID Point)

mantYnaTIsMrab;rk Coordinate rbs; Object mYyenAelI screen . Command: id

Specify point: Click Object X = 100 Y = 200 Z = 0.00

50. Command: List (Tool Menu bars -> Inquiry ->List)

eRbIsMrab;bgðajlkçN³rbs; Object nImYy²GacCabnÞat; CaRkLaépÞmYynigepSg²eTot. k> sMrab;bnÞat;

Command: li LIST Select objects: Click Object Select objects: Right Click

LINE Layer: "0" Space: Model space Handle = 89 From point, X= 8.7301 Y= 20.7121 Z= 0.0000 To point, X= 32.2874 Y= 20.7121 Z= 0.0000 Length = 23.5574, Angle in XY Plane = 0 Delta X = 23.5574, Delta Y = 0.0000, Delta Z = 0.0000

x>ctuekaNEkg Command: li

LIST Select objects: Click Object Select objects: Right Click

TI1 TI2

Line


LWPOLYLINE Layer: "0" Space: Model space Handle = 8A Closed Constant width 0.0000 Area 5000.0000 Perimeter 300.0000 At point X= 9.6621 Y= 12.5338 Z= 0.0000 At point X= 109.6621 Y= 12.5338 Z= 0.0000 At point X= 109.6621 Y= 62.5338 Z= 0.0000 At point X= 9.6621 Y= 62.5338 Z= 0.0000

51. Command: Text Style (Format menu bars -> Text Style)

eRbIsMrab;kMNt; RbePT TMhM GkSr.karkMNt;GkSrmansar³sMxan;kñúgkarsresr)aneRcIn RbePTenAkñúgrUbEtmYy. dUcCakarkMNt;GkSrsMrab; elx Code kMNt; RbePTGkSrsMrab;sresr cMNgeCIgepSg² l.kñúgrUbeKGacsresrCaGkSrExμrnigGkSr Englishk¾)an .

Command: St

Font Name: sMrab;eRCIserIsyk Style rbs; Font ehIybnÞab;mkeRCIserIsykkMBs; GkSrRtg; kEnøg Height . edIm,IkMNt;kMBs;GkSrRtUvKitGMBI Scale EdlRtUvKUr.

- KUr Scale 1:1 dak;kMBs;GkSr 3 mann½yfa 3mm*1=3 - KUr Scale 1:10 dak;kMBs;GkSr 3 mann½yfa 3mm*10=30

- KUr Scale 1:20 dak;kMBs;GkSr 3 mann½yfa 3mm*20=60




Select Object



eRkayBIeGaykMBs;GkSrrYcRtUveGayeQaμHmYyeday Click eTAelIGkSr New Edlsßit enAkñúg tMbn; Style Name .eRkayBI Click elI New eK)anrUbdUcxageRkam³

52. Command: DTEXT (Draw Menu bars -> Text -> Single Line Text)

DTEXT mkBIBakü Dynamic Text KWeRbIsMrab;sresr Text EdlmancMnYnGkSrtic dYcCasresrcMNgeCIgrbs;bøg;.eKGacbegáIt Text style eRcInRbsineKcg;eRbI Text style

NamYyenaHeKRtUv Activate Text style enaHCamunsin. cUleTAtarag Text style ehIyykeQ μaH Text style dak;elxeGayecjmkenAkénøg Style Name rYceRbI Command: Dtext CaeRsc.

Command: dt TEXT Current text style: "Standard" Text height: 5.2606 Specify start point of text or [Justify/Style]: Click Point Specify height <5.2606>: 3

Specify rotation angle of text <0>: 0 Enter text: I love you Enter text: Enter

53. Command: MTEXT (Draw Menu bars -> Text ->Multiline Text)

eRbIsMrab;sresrcMnYnGkSreRcInCYr. Command: Mt MTEXT Current text style: "Standard" Text height: 3 Specify first corner: Click Point Specify opposite corner or [Height/Justify/Line spacing/Rotation/Style/ Width]: Click Point bnÞab;mkeyIg)an Text Window or Multiline Text dUcxageRkam³

54. Command: Regen (View Menu bars -> Regen)

eRbIsMrab;eFVIeGayrgVg;manragmUlnigBRgIkbRgÜm)an. Command: regen

Regenerating model. 55. Command: EDIT (Modify menu bar -> Object ->Text)

eRbIsMrab;EkERbGkSrnigbEnßmGkSr . Command: ddedit


Select an annotation object or [Undo]: Click Object Command: ed Select an annotation object or [Undo]: Click Object

cMNaM³ Double click a text object. enaHGacEkERb)an 56. Command: Chang

eRbIsMrab;dUrlkçN³rbs; Object . eKGacdUrTisedA bnÞat; dUrTMhM;rgVg; dUrTisedA text . k> dUrTisedAbnÞat;tammMu

Command: - ch CHANGE Select objects: Click Object Select objects: Right Click Specify change point or [Properties]: -30

x> karbþÚrTMhMrgVg;

Command: -ch CHANGE Select objects: Click Object Select objects: Right Click Specify change point or [Properties]: -20

K> karbþÚr Text

Command: -ch Select objects: Click Object Select objects: Right Click Specify change point or [Properties]: Click Point Enter new text style <Standard>: Civil Specify new height <0.2000>:20 Specify new rotation angle <0>: 45

Enter new text <I am not forget thing on today>: Enter


K> karbþÚrepSg² Command: -ch

CHANGE Select objects: Click Object Select objects: Right Click Specify change point or [Properties]: p Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness/Material/Annotative]: c New color [Truecolor/COlorbook] <4 (cyan)>: red Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness/Material/Annotative]:

57. Dimension Style: (Format Menu bars ->Dimension Style) (Dimension menu bar->style)

eRbIsMrab;kMNt;TMrg;énkarvas;Evgrbs;rUb. Command: d

DIMSTYLE

- Set Current: sMrab;kMNt;GVIEdlkMBugeFVI

- Modify: sMrab;eRCIerIsb¤dUrRbePT Dimension - Override: sMrab;EkGVIEdlkMBugeFVI - Compare: sMrab;eRbobeFobb¤emIleQ μaHEdleyIg)anbegáItenaHmanGVIxH.

- New: sMrab;begáIteQ μaHfμ IkMueGayCan;KñanigmanRbePTxusKña.

New Style Name sMrab;dak;eQμaH Use for Tak;TgeTAnig dimension EdleyIgcg;eRbI Start with CaeQñaHEdleyIgkMBugEteRbI Continue sMrab;bnþedIm,IeRCIserIsEdlmanrUbxageRkam.


Line mantYnaTIsMrab;kMNt; B’NbnÞat; KMlat nig kMras; Color: sMrab;dUrB’N Dimension

Line weight: sMrab;kMNt;kMras; Line type: sMrab;RbePTbnÞat; Baseline Spacing: sMrab;KMlat

Dim line1: sMrab;biTr)aedk

Dim line2: sMrab;biTr)aedk

Ext line1: sMrab;biTr)aQr Ext line2: sMrab;biTr)aQr Extend beyond dim lines: sMrab;bnøÚtbegÁalsñwg

Offset from origin: cMgayBIbegÁalcab; Symbols and Arrows mantYnaTIsMrab;kMNt; B’N k,alRBYj nig kMras;

First: sMrab;eRCIserIsk,alRBYjTI1

Second: sMrab;eRCIserIsk,alRBYjTI2

Leader: sMrab;k,alRBYj

Arrow Size: TMhMk,alRBYj


Text: mantYnaTIsMrab;sresrGkSr Text style: dUrRbePTGkSrb¤ Font

Text Color: sMrab;B’NGkSr Text height: sMrab;kMNt;kMBs;GkSr Vertical: sMrab;dak;GkSrtamG½kS (Y)

Horizontal: sMrab;dak;GkSrtamG½kS (X)

Offset from dim lines: sMrab;dkXøaGkSrBIr)a dimension

Fit: sMrab;kMNt;TMhMGkSredaysV½yRbvtþi.

Use Over all scale of 300

Primary units: mantYnaTIsMrab;kMNt;RbB½n§ /cMnYnKt;nigkMNt;epSg²eTot.

Unit format: kMNt;eRCIserIsRbB½n§


Precision: kMNt;CacMnYnKt;nigTsSn¾PaK Prefix: dak;elxBImux Suffix: dak;xageRkay Scale factor: kMNt;CaTMhM FM b¤tUceTAtamkarkMnt;.

58. Command: Dimension Linear (Dimension menu bars ->Linear)

eRbIsMrab;vas;RbEvgGgát;Rtg;.

Command: dli DIMLINEAR Specify first extension line origin or <select object>: Click Object Specify second extension line origin: Click Object Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Click Point Dimension text = 100

Command: dli

DIMLINEAR Specify first extension line origin or <select object>: Select object to dimension: Click Object Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Click point Dimension text = 1000

Command: dli DIMLINEAR Specify first extension line origin or <select object>: Click Object Specify second extension line origin: Click Object Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: m Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Click Point Dimension text = 100


Command: dli DIMLINEAR Specify first extension line origin or <select object>: Click Object Select object to dimension: Click Object Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: a Specify angle of dimension text: 45 Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Click Point Dimension text = 100

59. Command: Dimension Aligned (Dimension menu bars -> Aligned)

eRbIsMrab;vas;Ggát;eRTtnigRsbrbs; Object. Command: dal

DIMALIGNED Specify first extension line origin or <select object>: Click Object Specify second extension line origin: Click Object Specify dimension line location or [Mtext/Text/Angle]: Click Point Dimension text = 200

Command: dal DIMLINEAR Specify first extension line origin or <select object>: Select object to dimension: Click Object Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Click point Dimension text = 1000

Command: dli DIMLINEAR Specify first extension line origin or <select object>: Click Object Specify second extension line origin: Click Object Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: m Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Click Point


Dimension text = 100

Command: dli DIMLINEAR Specify first extension line origin or <select object>: Click Object Select object to dimension: Click Object Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: a Specify angle of dimension text: 45 Specify dimension line location or [Mtext/Text/Angle/Horizontal/Vertical/Rotated]: Click Point Dimension text = 100

60. Command: Arc Length (Dimension menu bars ->Arc Length)

eRbIsMrab;vas;ExSekagnig Arc. Command: dar

DIMARC Select arc or polyline arc segment: Click Arc Specify arc length dimension location, or [Mtext/Text/Angle/ Partial/Leader]: Click Point Dimension text = 405

61. Command: Ordinate (Dimension menu bars -> Ordinate)

eRbIsMrab;rkcMgaycMenalEkgrvagG½kS (x) nig G½kS (y) . Command: dor

DIMORDINATE Specify feature location: endp of Specify leader endpoint or [Xdatum/Ydatum/Mtext/Text/Angle]: Dimension text = 30.0000


62. Command: Dimension Radius (Dimension menu bars ->Radius)

eRbIsMrab;vas;kaMrgVg;nigGgát;FñÚr. Command: dra

DIMRADIUS Select arc or circle: Click Object Dimension text = 25 Specify dimension line location or [Mtext/Text/Angle]:

Command: dra DIMRADIUS Select arc or circle: Click Object Dimension text = 200 Specify dimension line location or [Mtext/Text/Angle]: a Specify angle of dimension text: 60 Specify dimension line location or [Mtext/Text/Angle]: Click Point

Command: dra

DIMRADIUS Select arc or circle: Click Object Dimension text = 200 Specify dimension line location or [Mtext/Text/Angle]: m Specify dimension line location or [Mtext/Text/Angle]: Click Point


63. Command: Jogged (Dimension menu bars ->jogged) eRbIsMrab;vas;kaMrgVg;EdlmanlkçN³Cam:Ud. Command: djo

DIMJOGGED Select arc or circle: Click Object Specify center location override: Click Point Dimension text = 20 Specify dimension line location or [Mtext/Text/Angle]: Click Point Specify jog location: Click Point

64. Command: Dim diameter (Dimension menu bars ->Diameter)

eRbIsMrab;vas;Ggát;p©wtrgVg;. Command: ddi

DIMDIAMETER Select arc or circle: Click Object Dimension text = 50.0000 Specify dimension line location or [Mtext/Text/Angle]: Click Point

Command: ddi DIMDIAMETER Select arc or circle: Click Object Dimension text = 200 Specify dimension line location or [Mtext/Text/Angle]: m Specify dimension line location or [Mtext/Text/Angle]: Click Point

Command: ddi DIMDIAMETER Select arc or circle: Click Object Dimension text = 200 Specify dimension line location or [Mtext/Text/Angle]: a Specify angle of dimension text: 45 Specify dimension line location or [Mtext/Text/Angle]: Click Point

65. Command: Angular (Dimension menu bars ->Angular)

eRbIsMrab;vas;mMunigFñÚr. Command: dan

DIMANGULAR


Select arc, circle, line, or <specify vertex>: Click Object Select second line: Click Object Specify dimension arc line location or [Mtext/Text/Angle]: Click Point Dimension text = 45

66. Command: Quick Dimension (Dimension menu bars -> Quick Dimension)

eRbIsMrab;bþÚrTItaMg Dimension eTAtamtMrUvkar. Command: qdim

Associative dimension priority = Endpoint Select geometry to dimension: 1Found Select geometry to dimension: Click Object Specify dimension line position, or [Continuous/Staggered/Baseline/Ordinate/Radius/Diameter/datumPoint/Edit/seTtings] <Continuous>: Click Point

67. Command: Baseline (Dimension menu bars -> Baseline)

eRbIsMrab;vas;bnþb:uEnþvamancMnuccab;epþImrYm. Command: dba

Specify a second extension line origin or [Undo/ Select] <Select>: Click Point Dimension text = 15 Specify a second extension line origin or [Undo/ Select] <Select>: Click Point Dimension text = 400 Select base dimension:


68. Command: Continue (Dimension menu bars -> Continue)

eRbIsMrab;vas; Object bnþbnÞab;rhUtdl; Object cugeRkay. Command: dco

DIMCONTINUE Specify a second extension line origin or [Undo/ Select] <Select>: Click Point Dimension text = 60 Specify a second extension line origin or [Undo/ Select] <Select>: Click Point Dimension text = 50 Specify a second extension line origin or [Undo/ Select] <Select>: Click Point Dimension text = 80 Specify a second extension line origin or [Undo/ Select] <Select>: Click Point Select continued dimension:

69. Command: Dimension space (Dimension menu bars -> dimension space)

eRbIsMrab;eGayRbEvgenAcenøaHb¤cMgayBIKña.

k>karkMNt;Cak;lak; Command: dimspace

Select base dimension: Click Object Select dimensions to space: Click Object Select dimensions to space: Click object Enter value or [Auto] <Auto>: 100

x>karkMNt;sV½yRbvtþn¾ Command: dimspace

Select base dimension: Select dimensions to space: Click Object Select dimensions to space: Click object Enter value or [Auto] <Auto>:


70. Command: Dimension Break (Dimension menu bars -> Dimension Break)

eRbIsMrab;pþac;ecjBI Dimension mUyeTA Dimension mYyeTot. k>karpþac;CasV½yRbvtþn¾

Command: dimbreak Select a dimension or [Multiple]: Click Object No object selected. Select a dimension or [Multiple]: Click Object Select object to break dimension or [Auto/Restore/ Manual] <Auto>:

x>karRtlb;eRkay Command: dimbreak

Select dimension to add/remove break or [Multiple]: m Select dimensions: Specify opposite corner: 2 found Select dimensions: Click Object Select object to break dimensions or [Auto/Remove] <Auto>: r 1 object modified

K>karkat;tamkMNt; Command: dimbreak Select dimension to add/remove break or [Multiple]: Click Object Select object to break dimension or [Auto/Manual/ Remove] <Auto>: m Specify first break point: Click Point Specify second break point: Click Point 1 object modified

71. Command: Tolerance (Dimension menu bars ->Tolerance)

eRbIsMrab;;cMNaMGVImYyenAelI Object . Command: tolerance


72. Command: Center Mark (Dimension menu bars -> Mark)

eRbIsMrab;rkcMnucp©wtrgVg;. Command: dce

DIMCENTER Select arc or circle: Click Object

73. Command: Inspection (Dimension menu bars -> Inspection)

eRbIsMrab;dak;m:Udb¤cMNaMGVImYy. Command: diminspect

Select dimensions: 1 found Select dimensions: Click Object

74. Command: Jogged linear (Dimension menu bars -> jogged linear)

eRbIsMrab;dak;m:Ud Dimension Command: dimjogline

Select dimension to add jog or [Remove]: Click Object Specify jog location (or press ENTER):


75. Command: Dimension Edit (Dimension menu bars ->Dimension Edit)

eRbIsMrab;Ek Code Dimension rbs; Object . k> karbþÚrelx Code fμ I

Command: dimedit Enter type of dimension editing [Home/New/Rotate/Oblique] <Home>: N Select objects: Click Object Select objects:

x> karRtlb;mkedImvij

Command: dimedit Enter type of dimension editing [Home/New/Rotate /Oblique] <Home>: h Select objects: Click Object Select objects:

K> karbgVil Command: dimedit

Enter type of dimension editing [Home/New/Rotate/ Oblique] <Home>: r Specify angle for dimension text: 60 Select objects: Click Object Select objects: Right Click


X> karbgVilr)ar Command: dimedit

Enter type of dimension editing [Home/New/Rotate/Oblique] <Home>: o Select objects: Click Object Select objects: Right Click Enter obliquing angle (press ENTER for none): 45

76. Command: Dimension Text Edit (Dimension menu bars ->Dimension Text Edit)

eRbIsMrab;EkERbGkSrrbs; Dimension . k> karbþÚrelx Code xageqVg

Command: dimtedit Select dimension: Click Object Specify new location for dimension text or [Left/Right/ Center/ Home/Angle]: L

x> karbþÚrelx Code xagsþaM

Command: dimtedit Select dimension: Click Object Specify new location for dimension text or [Left/Right/Center/ Home/Angle]: R

K> karbþÚrelx Code kNþal

Command: dimtedit Select dimension: Click Object Specify new location for dimension text or [Left/Right/Center/ Home/Angle]: C

X> karbþÚrelx Code CamMu

Command: dimtedit Select dimension: Click Object Specify new location for dimension text or [Left/Right/Center/ Home/Angle]: a Specify angle for dimension text: 45


g> karbþÚrelxRtlb;mkedImvij

Command: dimtedit Select dimension: Click Object Specify new location for dimension text or [Left/Right/Center/ Home/Angle]: h

77. Command: Xref (Insert Menu bars -> Xrf Manger)

eRbIsMrab;naMrUbBI File epSg²cUleTAkñúg File EdleyIgkMBugKUr. Command: xref

• Attach sMrab;Tajyk File mk • Detach dk File ecjvijBI Attach

• Unload sMrab;dkrUbecjEteQ μaH File • Reload sMrab; Load ecjBI Unload Etb:ueNÑaH. • Bind sMrab;P¢ab;rUbEdleyIg)anbBa©ÚleTAkñúg File .

78. Command: Image (Insert Menu bars -> Image Manger)

eRbIsMrab;bB¢aÚlrUbfteTAkñúgKMnUrrbs;eyIg. Command: _image


• Attach sMrab;Tajyk File mk • Detach dk File ecjvijBI Attach

• Unload sMrab;dkrUbecjEteQ μaH File enAdEdl. • Reload sMrab; Load ecjBI Unload Etb:ueNÑaH. • Bind sMrab;P¢ab;rUbEdleyIg)asnbBa©ÚleTAkñúg File .

79> Command: Draw order (Tools menu bars -> Draw order)

eRbIsMrab;bBa¢ÚnnigRtlb; Object k>bBa©ÚneTAeRkay

Command: draworder Select objects: Click Object Select objects: Right Click Enter object ordering option [Above objects/Under objects/ Front/ Back] <Back>: B

80> Command: Edit hatch (Modify -> Object->Edit hatch)

eRbIsMrab;Ekb¤pøas;bþÚr hatch . Command: hatchedit

Select hatch object: Click Object

81> Command: Edit Polyline (Modify -> Object->Poly line)

eRbIsMrab;Ekb¤pøas;bþÚr Polyline nig line . Command: pedit

PEDIT Select polyline or [Multiple]: Click Object


Enter an option [Close/Join/Width/Edit vertex/Fit/Spline/Decurve/ Ltype gen/Undo]: s Enter an option [Close/Join/Width/Edit vertex/Fit/Spline/Decurve /Ltype gen/Undo]:

` Command: pedit

Select polyline or [Multiple]: m Select objects: Click Object Specify opposite corner: 4 found Select objects: Right Click Convert Lines and Arcs to polylines [Yes/No]? <Y> Enter an option [Close/Open/Join/Width/Fit/Spline/Decurve/Ltype gen/Undo]: J Join Type = Extend Enter fuzz distance or [Jointype] <0.0000>: 3 segments added to polyline Enter an option [Close/Open/Join/Width/Fit/Spline/Decurve/Ltype gen/Undo]:

82> Command: Edit Spline (Modify -> Object->Spline)

eRbIsMrab;Ekb¤pøas;bþÚr Poly line . Command: Splinedit

Select spline: Enter an option [Fit data/Close/Move vertex/Refine/rEverse/Undo]: F Enter a fit data option [Add/Close/Delete/Move/Purge/Tangents/toLerance/eXit] <eXit>: X Enter an option [Fit data/Close/Move vertex/Refine/rEverse/Undo]:

83> Command: pedit

eRbIsMrab;Ekb¤pøas;bþÚr object. Command: pe PEDIT Select polyline or [Multiple]: m Select objects: Click Object Select objects: Right Click Enter an option [Close/Open/Join/Width/Fit/Spline/Decurve/ Ltype gen/Undo]: w Specify new width for all segments: 10 Enter an option [Close/Open/Join/Width/Fit/Spline/Decurve/Ltype gen/Undo]:


84> Command: Layer (Format menu bars->Layer)

eRbIsMrab;kMNt;RbePTbnÞat; BN’ kMras; cak;esarniglak; Object. Command: Layer

- New Property Filter eRbIsMrab;bgðajeQ μaH Filter fμ I

- New Group Filter eRbIsMrab;begáIteQ μaH Group fμ I - New Layer eRbIsMrab;begáIteQ μaH Layer fμ I

- Delete eRbIsMrab;lubeQ μaH Layer ecal


- Set Current: eRbIsMrab; Select Layer EdlkMBugeFVIkar

- Name: eRbIsMrab;dak;eQ μaH - On: eRbIsMrab;biTnigebIk - Lock: eRbIsMrab;cak;esar - Color: eRbIsMrab;dak;B’N - Line Type: eRbIsMrab;dak;RbePTbnÞat; - Line Weight: eRbIsMrab;dak;kMras;bnÞat;

85> Command: Layoff

eRbIsMrab;lak;biT Object . Command: layoff

Current settings: Viewports=Off, Block nesting level=Block Select an object on the layer to be turned off or [Settings/ Undo]: Click Object Layer "Wall" is current, do you want to turn it off? [Yes/No] <No>: Y Layer "Wall" has been turned off. Select an object on the layer to be turned off or [Settings/Undo]:

86> Command: Layon

eRbIsMrab;ebIk Object . Command: layon

Warning: layer "Layer1" is frozen. Will not display until thawed. All layers have been turned on.

87> Command: Layout (Insert menu bars -> Layout)

eRbIsMrab;begáItTMrg;RkdasnigerobcMkic©karbBa©ab;. k>karbegáIt Layout

Command: layout Enter layout option [Copy/Delete/New/Template/Rename/ SAveas /Set/?] <set>: n Enter new Layout name <Layout2>: khin

x>karlub Layout Command: layout

Enter layout option [Copy/Delete/New/Template/Rename/SAveas/ Set/?] <set>: d Enter name of layout to delete <Layout1>: khin Layout "khin" deleted.


K>karftcMlg Layout Command: LAYOUT

Enter layout option [Copy/Delete/New/Template/Rename/SAveas / Set/?] <set>: c Enter name of layout to copy <khin>: Enter layout name for copy <khin (2)>: Norton Layout "khin" copied to "norton".

X>karbþÚreQ μaH Layout Command: LAYOUT

Enter layout option [Copy/Delete/New/Template/Rename/SAveas/ Set/?] <set>: r Enter layout to rename <khin>: Enter new layout name: nu Layout "khin" renamed to "nu".

g>karrkSaTuk Layout Command: LAYOUT

Enter layout option [Copy/Delete/New/Template/Rename/SAveas/ Set/?] <set>: sa Enter layout to save to template <Layout1>:

88> Command: Print (Files menu bars -> Layout)

eRbIsMrab;e)aHBum<kic©karecjmkeRkAedIm,IseRmckargarcugeRkay. Command: print

Page Setup

-Name: kareRCIseQ μaHEdl)ankMNt;kñúgkare)aHBum< -Add…: karbEnßmeQμaHkñúgkar e)aHBum<


Printer/Plotter

Name: karbgðajma:kma:sIune)aHBum< Properties: sMrab;kMNt;TMhMRkdas

Paper Size: eRbIsMrab;kMNt;TMhMRkdas

What to Plot: eRbIsMrab;kMNt;cMnuccab;rbs;épÞ Print

Center the Plot: eRbIsMrab;kMNt;cMnuckNþalénépÞ Print

Preview…: eRbIsMrab;emIlTMrg; Print

Plot Style Table: eRbIsMrab;eRCIserIs monochrome.ctb Ok :