7/27/2019 equipo para correr registros electricos-clase unacar ing petrolera.pdf
1/14
7-14 Slickline Service Equipment
Slickline Skid Units and Trucks
Halliburton designs and manufactures top quality skid-base
units for offshore operations and trucks for land operations.The units are known worldwide for their user-focused
design, providing the right mix of operator-friendly
components to make both specialized and standard
operations more productive. For more detailed information,please contact your local Halliburton representative.
Stainless Steel Skid UnitSlickline Container Unit
T800 Slickline Crane Truck
Offshore Three-Piece
Skid Unit
HAL22808
HAL22809
HAL22810
HAL22811
HAL22812
7/27/2019 equipo para correr registros electricos-clase unacar ing petrolera.pdf
2/14
Slickline Service Equipment 7-15
Surface Service Equipment
Halliburtons wellhead pressure control equipment
provides for a safe and highly productive service operation.
Unmatched equipment quality backed by availableextensive training and maintenance instruction has made
Halliburton the industrys premier provider of this type of
equipment and services. For more detailed information,
please contact your local Halliburton representative.
Options: Slickline Grease
Head
Liquid Chamber
Lubricator Control(Purge) Valve
Hydraulic Stuffing Box(16-in. Sheave)
Quick Union
Upper LubricatorSection
Quick Union
Middle LubricatorSection
Lubricator PickUp Clamp
Quick Union
Lower Lubricator
Section
Quick Union
Flanged TreeConnection
Options:Lubricator
Option: Pump-In Sub
Options: Wireline Valve
Dual (Manual or Hydraulic)
Wireline ValveTriple (Manual or Hydraulic)Wireline Valve
Single
(Manual or Hydraulic)
Safety ValvePin End Assembly
Slickline Grease Head
Liquid Chamber
Dual Wireline Valve
(Manual or Hydraulic)
Triple Wireline Valve
(Manual or Hydraulic)
HAL22753
HAL22754
HAL22755
HAL2275
6
HAL22757
7/27/2019 equipo para correr registros electricos-clase unacar ing petrolera.pdf
3/14
7-16 Slickline Service Equipment
AdvancedSlickline Services
Highly developed measurement and innovative downhole
tools provide low-cost slickline solutions for wellinterventions.
Halliburton Advanced slickline services let you set and
retrieve packers, plugs, and monobore flow controls, and
perforate, cut casing, and tubingall with depth accuracy
comparable to electric line with the efficiency of slickline.
Halliburtons innovative slickline technology produces depth
measurements so accurate you can now use slickline
procedures for many services traditionally reserved for
electric line operations. Procedure for procedure, when
compared to electric line, Halliburton's new slickline
technology substantially lowers your total cost.
Key developments make this revolutionary advance in
slickline utility possible:
An advanced measurement system that makes slickline
depth readings comparable to electric line depth
readings
A slickline collar locator that pinpoints tubing or casing
collars
A downhole power unit that eliminates the need for
explosives to set packers and plugs
An electronic triggering device that fires perforating and
cutting charges
A data/job logger that produces real-time slickline collar
logs or customer job summary
A wire inspection device that detects abnormalities in
slickline to facilitate wire management and reduce
premature failures
Unprecedented Slickline Accuracy
Halliburton's Advanced Measurement System (AMS) uses
microprocessor technology to take the guesswork out of
slickline depth measurements. Yes, we still count wheel turns.But, the processor not only counts wheel turns, it also
instantly and continuously adjusts for the effect of ambient
temperature on counter wheel size and for tension-caused
line stretch measured with an electronic load sensor. Depth,
tension, and line speed are logged and a hard copy printed in
real time, guiding the operator and providing a permanent
job record.
Correlate to the Original Log to Identify Collar Locations
Halliburton's exclusive slickline collar locator furtherenhances data accuracy. As it passes a tubing or casing collar,
it increases line tension. The tension spikes are recorded in
real time on the permanent job log so the operator always
knows the precise tool location in relation to the tubing or
casing collars.
Set Packers and Plugs Without Explosives
The remarkable Halliburton DPU downhole power unit
eliminates the need to use explosive charges to set packers
and plugs. The slow controlled force provided by an
electromechanical powertrain improves setting
performance for downhole equipment, such as packers,
where improved element compression and a more uniform
slip set are obtained.
7/27/2019 equipo para correr registros electricos-clase unacar ing petrolera.pdf
4/14
Slickline Service Equipment 7-17
Advanced Slickline Service Tools
JobTrakData Logger
Advanced Measuring System (AMS)
LineTrakInspection Device
Advanced
Slickline
Service Unit
SmartETD
System
Perforating Gun
CollarTrak
Slickline Collar
Locator
DPU
Downhole
Power Unit
Memory Production Logging CCL/Gamma Ray
Pressure
Temperature
Capacitance Water Holdup
Filled Density (Differential Pressure)
Fullbore Spinner and Continuous
Bridge Plug
MonolockPlug Packer Perforator
7/27/2019 equipo para correr registros electricos-clase unacar ing petrolera.pdf
5/14
Slickline Service Equipment 7-23
CollarTrakSlickline Collar Locator
The Halliburton CollarTrak slickline collar locator consists
of a standard electric line collar locator, an electronic sub-assembly, and a magnet/drag sub-assembly. When the collar
locator senses a tubing or casing collar, it signals theelectronic sub-assembly, which instantaneously activates
magnets in the magnet/drag assembly. The magnets increasefrictional engagement to the pipe wall, creating a brief butsignificant increase in line tension.
Halliburton's advanced measurement system detects the
tension increase and sends the data signals to the data/joblogger, which records it as a well-defined spike on the log.
The advanced measurement system automatically and
continuously compensates for line stretch, assuringlog accuracy.
The tool, which is powered by alkaline batteries, locatescollars in up to 13 chrome pipe and in flush-joint tubing.
CollarTrak Slickline Collar Locator
HAL8887
Slickline Collar Locator (SLCL) (with Power Pack) Specifications
Sizein. (mm)
Tubingor
CasingSize in.
Max ODMagnets
Collapsedin. (mm)
Max ODMagnets
Expandedin. (mm)
OptionalLargerMagnetHousing
Max OD LargerMagnet Housing
Collapsedin. (mm)
Max OD LargerMagnet Housing
Expandedin. (mm)
MaxOperatingPressure
psi
MaxOperating
Temp.F
OverallLength
in. (mm)PowerSource
TopConnection
Bottom ToolConnection
2.50(64)
3 1/2-41/2
2.50(64)
3.85(98)
No N/A N/A 15,000 30095.3
(2.421)AA sizeBatteries
1 5/16-in. -10UNS pin
1 5/16-in. -10UNS box
3.66(93)
5 1/2-7 5/8
3.66(93)
5.50(140)
Yes5.70(145)
7.50(191)
10,000 25069.8
(1.773)C sizeBatteries
1 1/16 in. -10UNS pin
1 1/16 -10UNS box
1.69(43)
2 3/8-2 7/8
1.69(43)
3.06(77)
No N/A N/A 15,000 30034.12(.86)
AA sizeBatteries
1 5/16 in. -10UNS pin
15/16 in. -10UNS box
All sizes are alloy material and have three magnets.
7/27/2019 equipo para correr registros electricos-clase unacar ing petrolera.pdf
6/14
7-24 Slickline Service Equipment
HAL8356
7/27/2019 equipo para correr registros electricos-clase unacar ing petrolera.pdf
7/14
Slickline Service Equipment 7-25
Advanced Measurement System (AMS)
The electronic advanced measurement system (AMS)
measures tension and depth, compensates for wire stretchand temperature effects on the measuring wheel, and reports
a corrected depth reading. This model of the AMS system isdesigned to be mounted inside a wireline operator cabin.
Other features also help improve the quality of a service job.A differential load indicator indicates small changes inpickup weight. Digital displays can be switched between
English and metric measurements at any time. Theapproaching surface alarm warns the operator as the tools
near the surface. The excessive tension function works withthe hydraulic system to limit the maximum line tension to an
adjustable preset value. The system allows the operator toinput a rig-up angle for accurate line tension readings.
When used with a Halliburton two-wheel counter with auniversal measuring wheel, the AMS gives accurate depthreadings for any size wire, in English or metric, without
changing wheels.
This model has digital and analog displays with switch inputcontrols and RS-232 output for data acquisition with alaptop computer.
Panel AMS will not work with IS (Class 1 Division 2)
counter. This system requires an electronic strain gauge loadsensor and an optical encoder.
Standard Mounted Equipment
Automatic depth adjustment
Line tension adjustment
Depth offset adjustment
Ambient temperature correction
Analog line tension display
Analog differential line tension display
Digital line tension display
Digital line depth display
Digital line speed display
RS-232 serial port output for corrected depth, line speed,line tension, units of measurement, and time
Advanced Measurement System
HAL88
90
7/27/2019 equipo para correr registros electricos-clase unacar ing petrolera.pdf
8/14
7-26 Slickline Service Equipment
Electronic Advanced Measurement System (Portable)
This portable model has a flat screen display, keypadfunctional inputs, and extended RAM for data storage.
A RS-232 serial port is provided for real-time data retrieval.
This system requires an electronic strain gauge, load sensor,
and an optical encoder. The portable unit is available forstandard and hazardous Class I Division 2 operation.
Standard Portable Model Equipment
Automatic depth adjustment
Line tension adjustment
Depth offset adjustment
Ambient temperature correction for counter wheel
Analog line tension display
Analog differential analog line tension display
Digital line tension display
Digital line depth display
Digital line speed display
RS-232 serial port output for corrected depth, line speed,
line tension, units of measurement, and time
Integrated AMS Advanced Measurement System
7/27/2019 equipo para correr registros electricos-clase unacar ing petrolera.pdf
9/14
7-28 Slickline Service Equipment
JobTrakData Job Logger
The JobTrak data job logger is used with the Halliburton
advanced measurement system to produce summary logs
that provide a real-time plot of depth, line speed, and linetension. The data logger consists of a portable computer and
thermal printer packaged in a heavy-duty carrying case. It is
connected to the AMS system through a RS-232 port, and the
computer is programmed to convert the AMS data to
graphical form. The data logger can be powered using 12 to
30 volts DC or 110 to 240 volts AC.
Standard Mounted Equipment
Temperature rating: -10 to 110F
Power supply: 12-30 VDC or 110-240 VAC
Maximum line speed: 3,000 ft/min (914 m/min)
Maximum line tension: 5,000 lb (2267 kg)
Plot units per hour settings: 4 in./hr or 8 in./hr
(10 cm/hr or 20 cm/hr)
JobTrak Data Job Logger
HAL8322
7/27/2019 equipo para correr registros electricos-clase unacar ing petrolera.pdf
10/14
Slickline Service Equipment 7-31
LineTrakSlickline Inspection Device and Wire Management Program
The Halliburton LineTrak slickline
inspection device spots problems that
simply would be impossible for even aveteran slickline technician to detect.
The device is used to provide
continuous inspection of the entire line
not just selected areas and provides
inspection of both in-service lines as
well as new lines as it is spooled.
Wire Management Program
In addition to periodic inspections for
line abnormalities, a permanent recordof each lines job history, when utilizing
Halliburtons AMS advanced
measurement system and the JobTrak
data logger, provide a basis for
predicting line failures due to normal
job-related stresses and exposure to
hostile well environments.
Wire inspections have become an
integral component of Halliburtons
extensive Wire Management
Programa program designed to
prevent on-the-job failures.
The LineTrak slickline inspection
device spots problems before they cause
downhole line failure. The followingare examples of problems detected by
the LineTrak device.
This 0.021-in. deep crack (100x magnification)
was detected in a nickel alloy wire with
1,850 cycles.
Damage on left was detected at 462 ft and on
right at 368 ft (arrow points to pit on wire) on a
nickel alloy wire.
Abrasion damage on this cobalt alloy wire was
detected before it could cause wire separation.
7/27/2019 equipo para correr registros electricos-clase unacar ing petrolera.pdf
11/14
Slickline Service Equipment 7-33
Deepwater Riserless Subsea Light WellIntervention System
The Halliburton deepwater riserless subsea light well
intervention system offers complete well interventionsolutions.
Features
Reduced well intervention costs on subsea wells
No workover riser during operation
System can be operated from a more cost-effective
intervention DP vessel
Ideal intervention method on deepwater wells
Increases subsea well availability
Reduced chance of damage resident pipelines and
structures
Deepwater Riserless Intervention System
7/27/2019 equipo para correr registros electricos-clase unacar ing petrolera.pdf
12/14
SOLUCIONES INTEGRADAS PARA POZOS ENTUBADOS MAXIMICE SU PRODUCCION
El Valor de la Experiencia
Estamos comprometidos con el diseo y fabricacin de las herramientas mas sofisticadas disponibles en la industria. Nuestros altos ndices de
satisfaccin del cliente son el resultado directo del uso de herramientas de alta calidad y del trabajo de nuestro personal altamente calificado
y experimentado.
Alt ernat ivas Sin Uso de Explo siv os
En algunos pases, los tiempos de espera o de envo deexplosivos para realizar operaciones de rutina, tales comodisparos o cortes de tubera, contribuyen en gran medida a
los ndices de Tiempo No Productivo o NPT. Talesretrasos pueden llegar a costar meses de trabajo.Halliburton ofrece un rango variado de solucionesefectivas sin uso de explosivos para reducir estos NPT.
Por ejemplo, hemos desarrollado mtodos para: Perforar tuberas de revestimiento y limpiar el tnel de
disparo utilizando fluidos
Perforar, rasgar y degradar tubera con fluidos o brazos
mecnicos Cortar tuberas con herramientas de corte radial y
tecnologa de flama Asentar tapones y empacadores electromecnicamente
Liderazgo en la Industria de Servicios de Lnea de Acero
Halliburton invent el uso comercial de esta tecnologa yaun es el lder a travs de una amplia gama de serviciosde registros, disparos y servicios mecnicos.
Gracias a nuestro generador patentado DownholePower Unit (DPU) (Ver pgina opuesta), casi todo loque anteriormente hacamos con tecnologa de cableelctrico, lo podemos hacer ahora por medio detecnologa de lnea de acero.
Esto es significativo debido a que las herramientas delnea de acero son generalmente de menor tamao queotros tipos de herramientas para el mismo propsito. Por
lo tanto, entran y salen de manera mas rpida y fcil,
reduciendo los costos de operacin.
Herramientas de Registros de Produccin para Todos losAmbient es
Si su pozo es vertical, desviado u horizontal, nosotros
fabricamos sensores y hardware para registros deproduccin de memoria y en tiempo real: Medicin de la tasa de flujo medidor de flujo
continuo, medidor de canasta y medidor de arreglo depropelas
Identificacin de fluidos y composicin del flujo medidor de presencia de gas, medidor de presencia de
agua de efecto capacitivo, medidor de densidad de
fluido con principio radiactivo, medidor de densidadpor presin diferencial, arreglo capacitivo paraidentificacin de fluidos
Diagnstico de pozos y condiciones de flujo presin,temperatura, calibrador X-Y, inclinmetro
Herramienta de correlacin rayos gamma, localizadorde coples de tubera de revestimiento
Los intervalos entre las lecturas pueden ser tan cortoscomo de 0.1 segundos o tan largos como varias horas.Una vez que los registros estn completos, el proceso defusionar los datos de tiempo de registro y de profundidad
es muy rpido.
7/27/2019 equipo para correr registros electricos-clase unacar ing petrolera.pdf
13/14
HEST-ICH
Integrated Cased Hole
Te new Halliburton Integrated Cased-Hole truck is a combination
unit capable o perorming all cased-hole logging, including
perorating and slickline operations.
Te unit is built on a Euro 5 Mercedes-Benz chassis, with a
US-built body. It is equipped with standard hydraulics, reel
package, and a measuring and cabling system.
Te equipment design, data, related details, and documentation
are in conormance with IEC 60204, 5th Edition 2005-10. All
components have been upgraded, including the truck chassis,
a Mercedes-Benz Actros, equipped with a powerul BlueEC 5
(Euro 5) 408-HP/1800-rpm engine.
Tis truck is designed and built to comply with all directives
required by the European Market, and has earned the marking
granted by the authorized third-party evaluator.
Te Integrated Cased-Hole truck is accompanied by a trailer fitted
with the pressure control equipment, including the wireline valve,
lubricators, grease injection pump, hydraulic control module, andthe required well adapters.
Tis innovative and integrated solution allows Halliburton to
provide our clients with a single set o equipment and the associated
crew to perorm both slickline and eline services, reducing
operating costs or our clients and increasing efficiency and value.
Halliburton Integrated Cased-Hole Truck
Te spacious 97-in. x 96-in.
(246.4-cm 243.8-cm) cabin
includes two workstations, and
ample room to accommodate
two operators and customer
representatives. It includes
tool racks and two built-in
workbenches, with tool boxes,
or slickline operations.
HAL38453
Chassis Specifications
Model Mercedes-Benz Actros
Drivetrain 64
Cab M-Cab
Wheelbase 165 in. / 4,200 mm
Gross Vehicle Weight 57,320 lb / 26,000 kg
Engine Model OM501LA
Engine Type V6 Direct Injection Diesel
Engine Power (1800 rpm) 408 HP / 300 kW
Engine Torque (1800 rpm) 1,475 lbf.ft / 2,000 Nm
Maximum Speed 1,500 rpm
PTO NB1
PTO Ratio 1.7
PTO P (maximum) 207 HP / 155 kW
PTO T (maximum) 376 lbf.ft / 510 Nm
Integrated Cased-Hole Truck DimensionsHAL
38450
HAL38451
353 1/8
353.125
1493
/8
100.
3937
7/27/2019 equipo para correr registros electricos-clase unacar ing petrolera.pdf
14/14
HEST-ICH
2013 Halliburton. All rights reserved. Sales of Halliburton products and services will be in accord solely with the terms and conditions contained in thecontract between Halliburton and the customer that is applicable to the sale. H09909-A4 1/13
www.halliburton.com
For more information, contact your local
Halliburton representative.
Dual-Reel Package Specifications
E-Line Reel S-Line Reel
Core 15 in. (38.1 cm) 19.75 in. (50.2 cm)
Flange Diameter 39 in. (99.1 cm) 26 in. (66.0 cm)
Width 32.036 in. (81.4 cm) 25.5 in. (64.8 cm)
Capacity 29,116 ft (8,875 m) of5/16-in. cable
30,000 ft (9,144 m) of0.092-in. wire
25,000 ft (7,620 m) of0.125-in. wire
Gear Box Type Rexroth GFT-17 Fairfield W6C700413X
Gear Box Ratio 45:1 13:1
Maximum Speed
ft/min, m/s
500
2.54
2,800
14.2
Maximum Line Pull
(Core-Full)
12,000 to 6,000 lb
5,443 to 2,722 kg
3,800 to 2,800 lb
1,724 to 1,270 kg
Electric Generator Specifications
Model 284PDL1750
Type MagnaPlus
Output 230 VAC
Frequency 50 Hz / 1,500 rpm
Output Power 36 HP / 27 kW Maximum
Regulator SE-350
MAKO Counter Specifications
Height 36.7 in. 0.932 m
Length 48.6 in. 1.234 m
Width (Base) 12 in. 0.305 m
Width (Overall) 12.8 in. 0.325 m
Weight 132 lb 60 kg
Maximum Tension 15,000 lb 6,800 kg
Line Sizes .092 in. to 5/16 in. 2.34 mm to 7.94 mm
Encoder 600 or 1,200 PPR
Backup Counter 4 PPR Quadrature
Load Pin Passive Bridge 1.5v Differential 4-20 maCurrent Loop
Te dual-reel package includes a logging #14 reel and a slickline0.092/0.125 reel, which allows the unit to work with a largeselection o slickline wires or e-line cables up to 5/16 inches.
Te reels are quick-change direct-drive units with no chains.Teir hydraulic system uses a Rexroth AA4VG 71cc pump and80CC motors. A slow-speed valve is included, allowing loggingspeeds as low as 1 pm. Te system is equipped with a ail-saehydraulic braking system, allowing the operator to perormone-handed jarring actions.
HAL38452
A 35-gallon (133-L) tank o hydraulic fluid eeds the closed-loopsystem. It includes the 71-cc pump, the auxiliary pump orspooling, and a Rexroth AA4V56, which drives the 27-kWMarathon Hydraulic generator:
Te truck is electrically wired with 220 VAC/ 50 Hz and 24 VDC,per European requirements. A step-down transormer is used to
provide 110 VAC or the Cased-Hole LOGIQ system. A 24 V to 12 V DCconvertor is also used to supply 12 volts to the system.
Te measuring system includes a Benchmark AMSLA513 MAKOhead, a heavy-duty Sl/EL measuring device or wirelines rom0.092 in. to 0.160 in. and E-lines/braided lines rom 3/16 in. to5/16 in., as shown here:
Te MAKO head provides depth and tension inormation to the
AMS-95 panel, which is used to acquire and display this data.Te panel provides the operator the means to set and makeadjustments to the data as necessary. Te AMS-95 has a tensionshot down and wire-management sofware or extra saety andto prevent wire damage. Depth is displayed rom data providedby an encoder mounted on a measuring device. Te tension datais provided by a load pin, and is also passed through to theCased-Hole LOGIQ acquisition system.
Top Related