Www.elcogen.com Elcogen_brochure_2013_eng
-
Upload
radu-victor-tapu -
Category
Documents
-
view
223 -
download
0
Transcript of Www.elcogen.com Elcogen_brochure_2013_eng
-
8/12/2019 Www.elcogen.com Elcogen_brochure_2013_eng
1/4
SOFC
-
8/12/2019 Www.elcogen.com Elcogen_brochure_2013_eng
2/4
Property ASC-10B ASC-10C ASC-12A
Anode support composition NiO/YSZ NiO/YSZ NiO/YSZAnode support thickness 500 m 200 m 200 mAnode functional composition NiO/YSZ NiO/YSZ NiO/YSZAnode functional thickness 12 m 12 m 7-10 mElectrolyte composition YSZ YSZ YSZElectrolyte thickness 3 m 3 m 1-3 mBarrrier composition GDC GDC GDCBarrier thickness 2 m 2 m 0.2 mCathode composition LSC LSC LSCCathode thickness 20-30 m 20-30 m 20-30 mTotal thickness 550 m 250 m 250 mThickness tolerance +/- 25 m +/- 15 m +/- 15 mSuggested operating temp. 600-700C 600-700C 600-700CStandard size (cell) 10x10cm 10x10cm 10x10cmStandard size (cathode on cell) 9x9cm 9x9cm 9x9cmDifferent sizes available + + +Different shapes available + + +Half-cells available * + + +
* For universities and R&D companies we have a range of half-cell available
for you to evaluate your own active layers on a trusted and well-tested half-
product.
SOFC single cellsIn order to bring you the best solution in SOFC single cell market, we have set high standards, which our products must meet.
As a proof of our work, we have received ISO certificates according to quality control (IS0 9001:2008) and environmental
management standard (ISO 14001:2004).
Properties of cell generationsIn the following table main properties of our three cell generations are brought. Please note that ASC-12A line will be avail-able starting from autumn 2013.
Single cell standardelectrochemical performanceAs a part of our quality control system, we execute regular cell tests at VTT
testing facilities in Finland who is well-known, objective and trusted service
provider. In the following typical plots for performance and durability are given.
Synthetic reformate in single cell tests had the composition of 15% CH4, 26%
CO2, 29% H2 and 30% H2O.
Elcogen ASC-10B SOFC cell100x100mm cell, active area 79cm2Measured at 650C
Elcogen ASC-10B SOFC cellActive area 79cm2, I = 23.4A; i = 300 mA/cm2Anode feed [mlpm]: H
2819
Cathode feed [mlpm]: air 1942
Elcogen ASC-10B SOFC cell100x100mm cell, active area 79cm2
i = 400 mA/cm2
Voltage
(V)
Dry hydrogen
Synthetic methane reformat
1,2
0,8
0,4
0,0
Current density (A/cm)
0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1,0
V
oltage(mV) 850
800
750
700
650
900
950
1000
0 200 400 600 800 1000 1200 1400 1 600
Temperature (C)
Voltage (mV) Time (h)
0 0,05
-0,02
-0,04
-0,06
-0,08
-0,00
0,10 0,15 0,20 0,25 0,30 0,35 0,40
Reformate
Zimag
(Ohm
cm
)
Zreal(Ohm cm)600 C650 C700 C
ASC-10B
ASC-10C
ASC-12A
-
8/12/2019 Www.elcogen.com Elcogen_brochure_2013_eng
3/4
SOFC stackElcogen is manufacturing solid oxide fuel cell stacks and has started first deliveries to customers. Current version of the
stack available for deliveries is rated for 500 W. It is based on 30 Elcogen ASC-10B cells, metallic interconnects and glass
based sealants. Stack has excellent electrical performance between 600 700 C with ASR measured to be 0.5 Ohm/cm 2
(at 650C, Uf = 46 %). Reduced operating temperature enables the use of low cost materials with good long term stability.
Reduced operating temperature also enables major cost reduction in BoP components such as for air recuperator and heat
insulation. Elcogen is introducing stack for 1 kW systems during 2013. Stack will be based on similar material system as
the current 500 W stack.
Elcogen 500W stack iV-characteristics* Test conditions: U
f= 46%,
VN
anode = 0.28 Nl/min/cell, Uo= 22%,
Elcogen stack power curve.* Test conditions: U
f= 46%,
VNanode = 0.28 Nl/min/cell, Uo = 22%,
Tcathode,in
= 600C, Tanode,in
= 660C.
Longterm stability test of Elcogen stack.* Test conditions: i = 0.3A/cm2, [H
2in N
2] = 50%,
Uf= 60%, U
o= 26%, T = 700C
Averagestackvoltage[V]
0 0.1 0.2 0.3 0.4
Current density (A/cm)
0.6
0.4
0.2
0.0
0.8
1
100
200
300
400
500
Stack current [A]
Stackpower(W)
0 5 10 15 20
0 100
1,00
1,50
0,50
200 300 400 500 600 700 800
Time / h
Avera
gevoltage(V)
Fullthermocycle
-
8/12/2019 Www.elcogen.com Elcogen_brochure_2013_eng
4/4
Production facilitiesOur small-series production facility has been set up in Tallinn, Estonia. We have paste manufacturing laboratory, all neces-
sary tape-cast, screen-print, firing and quality control machinery. Our SOFC single cell technology is designed in a way that
it is easily scalable to larger output quantities. Our cells are produced entirely in-house starting from powders.
CompanyElcogen is a manufacturer anddeveloper of high-performance anode-supported Intermediate Temperature Solid Oxide Fuel
Cells based on proprietary materials and technological solutions. Elcogen was established in 2001 and is located in Tallinn,
Estonia and Espoo, Finland. The company works closely with leading Estonian and Finnish research institutions.
Elcogen OY
Visiting address: Biologinkuja 5,
Espoo, Finland
Post address: P.O. Box 1000,
FI-02044 VTT, Finland
Elcogen AS
Saeveski 10a Tallinn
11214 Estonia
Phone: +372 671 2990
Fax: +372 671 2999
E-mail: [email protected]
www.elcogen.com