Sistema de aseguramiento de calidad para fabricante de ...º6.pdf · materiales ha introducido un...

TÜV Rheinland Industrie Service GmbH E-008-D-Rev22 Notifizierte Stelle für Druckgeräte, Kennnummer: 0035 Am Grauen Stein, D-51105 Köln

Certificado

Sistema de aseguramiento de calidad

para fabricante de Materiales

según la Directiva 2014/68/EU

Certificado no.: 01 202 E/Q-12 6140 Nombre y dirección del fabricante:

FAED, S.L. (Fundiciones de Aceros Especiales D, S.L.) Pol. Ind. de Requejada, Parcela Z-52 E - 39313 POLANCO (CANTABRIA)

Por la presente se certifica que el fabricante de materiales ha introducido un sistema de calidad. El sistema de calidad ha sido auditado según la Directiva Europea 2014/68/EU, Apéndice I, Sección 4.3 para equipos a presión de acuerdo a los materiales listados en el ámbito de aprobación.

Comprobado según la Directiva 2014/68/EU:

Sistema de calidad según EN 764-5, sección 4.2 y AD 2000-Merkblatt W0

No. del informe del auditor:

E/Q-12 6140

Ámbito de aprobación:

Fundicion de piezas moldeadas en aceros al carbon, aceros aleados, aceros inoxidables, aceros resistentes al calor y superduplex, ver anexo del certificado

Planta de producción:


Válido hasta:

23 de noviembre de 2021

Colonia, 23 de agosto de 2018 i.V. Dipl.-Ing. Oliver Theisen

TÜV Rheinland Industrie Service GmbH E-008-D-Rev22 Notifizierte Stelle für Druckgeräte, Kennnummer: 0035 Am Grauen Stein, D-51105 Köln

Certificate

Quality-Assurance System

for Manufacturer of Materials

acc. to Directive 2014/68/EU Certificate no.: 01 202 E/Q-12 6140 Name and address of the manufacturer:


Herewith we certify that the material manufacturer has established and applies a Quality Management System. The system was audited according to the European Directive 2014/68/EU, Annex I, Par. 4.3, with regard to the materials as listed in the scope of approval.

Tested acc. to Directive 2014/68/EU:

QM System acc. to EN 764-5, article 4.2 and AD 2000-Merkblatt W0

Audit report no.:

E/Q-12 6140

Area of validity:

Foundry of moulded pieces in carbon steel, alloy steel, stainless steels, heat resistant steel and superduplex, see annex to certificate

Manufacturing plant:


Valid until:

November 23., 2021

Cologne, August 23., 2018 i.V. Dipl.-Ing. Oliver Theisen

Annex to Certificate No. : 01 202 E/Q-12 6140

E-100-E-Questionnaire 22 MM-Form8-Scope-Rev22.doc Rev. 22

Scope according to

Directive 2014/68/EU Annex I §4.3

EN 764-4 AD 2000-Merkblatt W0

FPC, Regulation (EU) No. 305/2011(System 2+)

Manufacturer Work Nationality Date Page No..

Company Name: FAED, S.L. (Fundiciones de Aceros E - 39313 POLANCO (CANTABRIA) E 19.07.18 1 TÜV Rheinland

Especiales D, S.L.) Industrie Service

Location: E - 39313 POLANCO (CANTABRIA) Rev.:2 of : 3 GmbH

Cur

-

Materials-term Materials-No.

Material Specification

Delivery Cond.

Article Type of Product

Dimensions Weight max

Technical Specifications

Remarks

Thick-ness

Requirements

mm mm 1=t / 2=kg

Technical Regulations

from

Up to from Up to

result

1 2 3 4 5 6a

6b 7a 7b 8a

8b 9 10

1. Materials according to harmonized European standards (hEN) and European Approval for Materials (EAM) acc. Directive 2014/68/EU

The use of the materials according to Directive 2014/68/EU is bound to the publication of Harmonized European Standards or to the qualification by a European material approval or to the

particular material appraisal. With that the manufacturing reliability for equivalent material grades according to other standards (e.g. BS, AFNOR, ASME) is proved. The requirements and limits

of the applicable code respectively the PED must be observed for the use of material grades listed in column 2 to 4.

1 GX4CrNi 13-4 ( 1.4317) EN 10283 +QT CAST PIECES 200 9000 EN 10283 a 2 Gx2CrNiMo 22-5-3 (1.4470) EN 10283 +AT CAST PIECES 150 9000 EN 10283 a

Remarks +AT = solution annealed +NT = normalized and tempered a = PMA for the use in pressure equipment +AR = as rolled +QT = quenched and tempered in Directive 2014/68/EU neccessary +M = thermo mechanical treated +S = soft annealed +N = normalized or normalizing formed +SR = stress relieved



Scope according to








Cur

-



Delivery Cond.




Remarks

Thick-ness

Requirements

mm mm 1=t / 2=kg Technical Regulations

from Up to

from Up to

result

1 2 3 4 5 6a 6b 7a 7b 8a 8b 9 10

2. Materials according to the AD 2000-Code

The use of the materials according to DGR 2014/68/EU is bound to the publication of Harmonized European Standards or to the qualification by a European material approval or to the



3 G 20 Mn 5 (1.6220) EN 10293 +QT PIECES 100 9000 AD 2000 W5 3·2 CERTIFICATE

Remarks +AT = solution annealed +NT = normalized and tempered a = PMA for the use in pressure equipment +AR = as rolled +QT = quenched and tempered in Directive 2014/68/EU neccessary +M = thermo mechanical treated +S = soft annealed +N = normalized or normalizing formed +SR = stress relieved



Scope according to








Cur

-



Delivery Cond.




Remarks

Thick-ness

Requirements

mm mm 1=t / 2=kg Technical Regulations

from Up to

from

Up to

result

1 2 3 4 5 6a 6b 7a 7b 8a

8b 9 10

3. Materials according to international standards ( e. g. ASTM, ASME, IBR etc. )

The use of the materials according to DGR 2014/68/EU is bound to the publication of Harmonized European Standards or to the qualification by a European material approval or to the



4 WCB ASTM A 216 +N, +QT CAST PIECES 200 9000 ASTM A 216 a 5 CA6Mn ASTM A 487 +QT CAST PIECES 200 9000 ASTM A 487 a

Results +AT = solution annealed +NT = normalized and tempered a = PMA for the use in pressure equipment +AR = as rolled +QT = quenched and tempered in Directive 2014/68/EU neccessary +M = thermo mechanical treated +S = soft annealed +N = normalized or normalizing formed +SR = stress relieved

Sistema de aseguramiento de calidad para fabricante de ...º6.pdf · materiales ha introducido un...

Documents

Transcript of Sistema de aseguramiento de calidad para fabricante de ...º6.pdf · materiales ha introducido un...