Specialist suppliers of Valves, Pipe, Fittings and Flanges to the Oil, Gas, Petrochemical, Power and Utility Industries

• Introduction – An overview of ProTech Flow Solutions

• Manufacturers• Valve Types• Global Supply• Additional Services• Why Us?• Product Range• Quality Policy• Contact Us

• ProTech Flow Solutions Ltd, formed in 2012, is a privately owned company. We are a Valve, Pipe, Fittings and Flanges project supply company and stockist/distributor to the Oil, Gas, Power and Utility Industries.

• We supply a comprehensive range of high specification products from the world’s leading Valve, Pipe, Fittings and Flange manufacturers.

• ProTech Flow Solutions provides a total service for the supply of manual and actuated Valves and Pipe, Fittings and Flanges to End Users, Contractors, OEM’s and Distributors.

INTRODUCTION

• We offer Valves from proven manufacturers complying with international standards and Client project specifications.

• ProTech Flow Solutions supplies equipment worldwide ensuring both local and globally operating companies receive the same high quality of service and product, no matter where they are located.

• Highly experienced trained staff in all disciplines with 20 years’ industrial experience.

• BS EN ISO 9001: 2008 approved Quality Management System.

• FPAL/UVDB Achilles approved.

INTRODUCTION

VALVE TYPESGate / Globe / CheckForged• Bolted or Welded Bonnet• ½” to 2”• Class 150 to 2500• RF, Socket Weld, NPT,

Butt Weld• API 602, API 603, API 606• A105, F316, F304, F5, F9,

F11, F12, F22, LF2, Alloy, Inconel, Monel

• NACE MR0175

VALVE TYPESGate / Globe / CheckCast• Bolted, Pressure Sealed, Bellow

Sealed• 2” to 48”• Class 150 to 2500• RF, Butt Weld, RTJ• API 600• WCB, LCC, C5, C12, WC6, CF8M,

CF8C• NACE MR0175

VALVE TYPESBallFloating and Trunnion Mounted• Side Entry/Top Entry• Soft seated/Metal to Metal

seated• 2 Way/3 Way/Cryogenic• A105, WCB, LF2, LCC, 316,

CF8M• API 6D, API 6A• ½” to 56”• Class 150 to API 5000

VALVE TYPESWafer Check• Wafer, Double Flanged, Solid

Lug Wafer, Butt Weld End, Hub Ended

• 2” to 82”• Class 150 to 2500• API 594• A105, WCB, LF2, LCC, 316,

CF8M, Duplex, Super Duplex, Cast Iron

• NACE MR0175

VALVE TYPESDouble Block and Bleed• Floating / Trunnion Mounted• All Designs• Ball/Ball/Ball• Ball/Needle/Ball• Gate/Gate/Gate• Gate/Needle/Gate• ½” to 24”• Class 150 to 1500

VALVE TYPESButterfly Valves• Soft/Metal Seated• Double Offset/Triple Offset• Standard/High Performance• Wafer/Wafer Lugged/Double

Flanged• Up to 108”• Class 150 to 1500

VALVE TYPESPlug Valves• Lubricated and Non Lubricated• Soft and Metal Seated• Sleeved• Jacketed• Pressure Balanced• Self Lubricating• 2 way and 3 way• Sizes up to 20”

VALVE TYPESSub-Sea Valves• Ball Valves, Gate Valves, Choke

Valves• 2” to 64”• Class 150 to 2500• API 6D, API 6DSS, API 6A, API

17D

VALVE TYPESCryogenic Valves• Gate Valve, Globe Valve & Ball

Valve• Class 150 to 1500• SE, SW, BW & Flanged• 316, 304, CF8, CF8M• API 600, API 602, BS 1873, API

6D, API 607

VALVE TYPESDIN Valves• Gate Valve, Globe Valve &

Check Valve• Class PN16 to PN160• 15mm to 1400mm• Carbon Steel, Low Temp Carbon

Steel, Stainless Steel & Ductile Iron

VALVE TYPESAutomation & Control Valves• Angle seat piston• Globe or butterfly valve• Conventional or severe service• Balanced plug/high capacity• Cage or disc stack type• Single or double port bodies• Three way valve bodies

FORGED STEEL FITTINGS• 45/90 Degree Elbows,

Half/Full/Reducing Couplings, Equal/Reducing Tees, Male/Female Elbows & Unions, Hex/Square/Round Head Plugs, End Caps, Crosses, Hex Bushes, Equal/Reducing Nipples, Pipe Nipples, Concentric Swage Nipples, Reducing Inserts

• Carbon Steel, Low Temp Steel & Stainless Steel

• 1/8” to 4”• Class 3000lb to 6000lb• Screwed NPT, BSPT & Socket

Weld

PIPE

• ½” to 80”• Carbon Steel, Chrome-Moly,

Stainless & Duplex• Schedule 10 to XXS• A106, API 5L, GR6, P5, P9, P11,

P22, TP310, TP316/L, TP321, UNS 31803

FLANGES

• ½” to 60”• Class 150 to 2500• SA105N, LF2, F304/L, F316/L• Slip On, Weld Neck, Screwed,

Lap Joint, Socket Weld, Blind & Bossed Blind

• Also supply Orifice Weld Necks, Drip Rings, Spectacle Blinds, Long Weld Necks and Special Flanges

FITTINGSButt Weld Fittings• ½” to 48”• Schedule 20 to XXS• Carbon Steel, Low Temp Steel &

Stainless Steel• 45/90 Degree Long/Short

Radius Elbows, Equal/Reducing Tees, Concentric/Eccentric Reducers, Return Bends & End Caps

• Welded or Seamless

SPARE PARTSSpare Parts Solutions• Cost competitive engineered

components available on short lead time

• Full technical support and design

• Material upgrades can be offered competitively priced against original material selection

• Engineering solutions can be offered to enhance efficiency, improve performance and extend the life of equipment

Global SupplyProTech Flow Solutions Ltd is able to supply equipment on a global scale to any client-designated site location.

TESTING, INSPECTION & CERTIFICATION• API• ISO• MSS-SP• ASME• ASTM• GOST-R• Radiography• Ultrasonic Examination• MPI• DPI• PMI

• Extended Hydro-testing• Low Temperature Testing• High Pressure Gas Testing• Fugitive Emission Testing• Valve Modification• Standard and Special

Painting including Thermal Spray Aluminium

• Certification and Traceability

WHY US?• Long Term Project Experience• On Time Delivery – Ability to fast track if required• Documentation Suiting Individual Project

Requirements• Sound Financial Base • Competitively Priced • Flexibility - Tailored To Your individual Project

Supply Needs• Quality Products• Fast Turn Around of Products and Documentation

PRODUCT RANGE• Forged Gate, Globe &

Check Valves• Cast Gate, Globe &

Check Valves• Trunnion Mounted &

Floating Ball Valves• Wafer Check Valves• Double Block & Bleed

Valves• Butterfly Valves

• Plug Valves• Sub-Sea Valves• Cryogenic Valves• DIN Valves• Automation & Control • Forged Steel Fittings• Pipe• Flanges• Butt Weld Fittings• Spares

To realise our vision and mission we shall exert every effort to achieve the following:

• Understand and meet the requirements of our customers and strive to enhance their satisfaction by completing the projects in compliance with their specifications;

• Implementing actions to comply with applicable legal requirements and other requirements;

• Conduct all business in a safe and environmentally sound manner. Protecting our employees, contractors, clients and visitors involved in our operations;

QUALITY, HEALTH & SAFETY AND ENVIRONMENTAL POLICY

• Provide a place of employment where hazards are identified and the appropriate action taken to reduce the risk of injury, to actively promote the highest standards of safety behavior, environmental awareness and to meet or exceed applicable local, national and international regulations as well as international standards ISO 9001:2008, 14001:2004 & OHSAS 18001:2007;

• Understanding that personal safety, incident prevention and environmental protection are individual responsibilities, employees are empowered to identify risks and develop solutions to HSE issues;

QUALITY, HEALTH & SAFETY AND ENVIRONMENTAL POLICY

• Establishing, implementing, monitoring continually improving and reviewing integrated management system through a set of key performance indicators, training, measurable objectives, management programs and targets;

• The policy statement will be available to public, interested parties and all persons working under the control of ProTechFlow Solutions;

• This policy will be reviewed periodically for continuing suitability.

QUALITY, HEALTH & SAFETY AND ENVIRONMENTAL POLICY

ProTech Flow Solutions LtdMilton HallEly RoadMiltonCambridgeCB24 6WZ

t. +44(0)1223 828360sales@protechflowsolutions.comwww.protechflowsolutions.com

New stock RangeWe are pleased to announce our new range of European Stainless steel Flanges

• DETAILS• Material Grade : ASTM / ASME SA182 F316/L• Dimensionally to ANSI B16.5• Latest Edition of NACE • IGC Test to A262 Practice E• ISO 9001:2008• PED 97/23/EC Approved Mill

• SIZE RANGE AND SCOPE • ½” to 2” 600LB – WELD NECK, SLIP ON, BLIND, SCREWED, SOCKET WELD – Raised Face or RTJ finish• 3” to 8” 600LB – WELD NECK, SLIP ON – Raised Face or RTJ Finish• ½” to 2” 900LB – WELD NECK, SLIP ON, BLIND, SCREWED, SOCKET WELD – Raised Face or RTJ finish• 3” and 4” 900LB – WELD NECK, SLIP ON – Raised Face or RTJ finish• ½” to 2” 1500LB – WELD NECK, SLIP ON, BLIND, SCREWED, SOCKET WELD – Raised Face or RTJ finish• ½” to 2” 2500LB – WELD NECK, SLIP ON, BLIND, SCREWED, SOCKET WELD – Raised Face or RTJ finish• SCHEDULES 10s, 40s, 80s, 160 and XXS

• CONTACT DETAILS• Email : mark.hipkiss@protechflowsolutions.com• Telephone : +44(0)1223 257709• Mobile No : +44(0)7715 083139• Website : www.protechflowsolutions.com