Manual Conducto MUCR HF

download Manual Conducto MUCR HF

of 34

Transcript of Manual Conducto MUCR HF

  • 7/25/2019 Manual Conducto MUCR HF

    1/34

    Aire AcondicionadoDC de Conducto

    Modelos:

    MUCR 18 HFMUCR 12 HF

    MUCR 24 HF

    Manual de instalacin

    MUCR 30 HFMUCR 36 HFMUCR 48 HFMUCR 60 HF

    ES

    Para realizar correctamente la instalacin, lea este manual antes de empezar.El contenido de este manual puede estar sujeto a cambios sin notificacin para la introduccin de mejoras.

  • 7/25/2019 Manual Conducto MUCR HF

    2/34

    ES

    NDICE

    1. INFORMACIN DE LA INSTALACIN...................................................................................................2

    2. ACCESORIOS.........................................................................................................................................2

    3. INSTALACIN MANDO A DISTANCIA....................................................................................................2

    4. LUGAR DE INSTALACIN......................................................................................................................3

    5. INSTALACIN DE LA UNIDAD INTERIOR.............................................................................................4

    6. INSTALACIN DEL CUERPO PRINCIPAL.............................................................................................5

    7. INSTALACIN DEL PANEL.....................................................................................................................6

    8. INSTALACIN DE LA TUBERA DE CONEXIN...................................................................................7

    9. CONEXIN DEL TUNBO REFRIGERANTE...........................................................................................8

    10. CONEXIN DEL TUBO DE DESAGE................................................................................................9

    11. ELCTRICAS...............................................................................................................9

    12. ELECTRICOS................................................................................................................10

    13. AJUSTE DE DIRECCIONES DE RED................................................................................................13

    14. PRUEBA DE FUNCIONAMIENTO......................................................................................................1415. INSTRUCCIONES DE COMPROBACIN..........................................................................................14

    16. INSTRUCCIONES FUNCIONES EN PANTALLA................................................................................14

    17. CDIGO DE ERROR DE LA UNIDAD EXTERIOR.............................................................................15

    CONEXIONES

    ESQUEMAS

    Aire Acondicionado DC Conducto

  • 7/25/2019 Manual Conducto MUCR HF

    3/34

    ES

    1. INFORMACIN DE INSTALACIN

    Para hacer una instalacin correcta, lea anteseste manual.

    La instalacin de la unidad debe confiarse apersonas cualificadas.

    Al instalar la unidad interior o sus conducciones,siga las instrucciones de este manual tanestrictamente como sea posible.

    Cuando termine todos los trabajos deinstalacin, no conecte la alimentacin elctrica

    hasta no haber realizado una comprobacinexhaustiva.No se har ningn nuevo aviso si se realiza

    alguna modificacin de este manual aconsecuencia de una mejora del producto.

    NOTAEl instalador debe explicar a los usuarios elmanejo adecuado del equipo y su mantenimiento,as como recordarles que lean y conserven losmanuales de instalacin y de usuario

    2

    Aire Acondicionado DC Conducto

    2. ACCESORIOS

    Manual de instalacin (1)Mando a distncia (1)Aislante de los tubos (2)Tubo de descarga (1)

    Cinta adhesiva para sellado (1)

    Mando a distancia (1)Base del mando (1)Tornillo del montaje (1)Pilas alcalinas (2)Manual del mando a distancia (1)

    Mando a distancia y elementos

    3. INSTALACIN DEL MANDO ADISTANCIA

    No golpee ni deje caer el mando Antes de instalarlo, asegrese que el lugarelegido est dentro del espacio de recepcin

    El mando debe estar al menos a 1 m dedistancia de cualquier aparato de TV o sonido(para evitar interferencias) No coloque el mando en un lugar expuesto a laluz solar directa o a una estufa u otra fuente decalor. Cuando coloque las pilas, fjese en que los polospositivo y negativo estn bien orientados.

  • 7/25/2019 Manual Conducto MUCR HF

    4/34

    ES

    3

    4. LUGAR DE INSTALACIN

    Unidad interior

    Unidad exterior

    Hay que dejar espacio suficiente para lainstalacin y el mantenimiento.

    El techo debe ser horizontal, y su estructuracapaz de soportar el peso de la unidad.

    No debe haber obstculos para la salida yentrada de aire, y la influencia del aire exteriordebe reducirse al mnimo.

    El aire de salida ha de poder alcanzar todos lospuntos de la habitacin.

    Los tubos de conexin y desage deben serfciles de extraer.

    No debe haber radiacin directa desde aparatos

    de calefaccin.

    Hay que dejar espacio suficiente para lainstalacin y el mantenimiento.

    No debe haber obstculos para la salida yentrada de aire; la unidad no debe verse afectadapor vientos fuertes. El emplazamiento debe serseco y estar bien ventilado.

    La

    ooH

    uNL

    Las condiciones descritas a continuacin puedenafectar negativamente al funcionamiento de lamquina. (Si no hay otro remedio, consulte con el

    concesionario local)

    a. Presencia de derivados del petrleob. Ambiente salino (cerca de la costa)c. Atmsfera con gases custicos (sulfuros, porejemplo)(cerca de manantiales de aguastermales)d. Grandes oscilaciones de la tensin en la red(en fbricas)e. Espacios reducidos y cerradosf. Cocinas con gran cantidad de vapores de aceite

    g. Cerca radiaciones electromagnticas potentesh. En presencia de materiales o gases inflamablesi. En presencia de vapores o lquidos cidos o

    alcalinosj. En otras condiciones especiales

    IMPORTANTE

    a superfcie de apoyo debe ser plana yhorizont l y capaz de soportar el peso de la

    unidad exteri r. No debe haber otras fuentes deruido o vibraci nes. ay que asegurarse de que el ruido y el aireexp lsado no molestan a los vecinos. o debe haber fugas de gas combustible. a instalacin de los tubos y cables de conexinha de ser fcil.

    ANTES DE LA INSTALACIN

    NOTA

    1. Elija el recorrido mejor para el traslado2. Transporte la unidad conservando la mayorcantidad posible del embalaje original3. Si instala la unidad sobre una parte metlica deledificio, debe aislarla elctricamente de acuerdocon los reglamentos de aparatos elctricospertinentes

    Condiciones contenidas en la Directiva89/336/CEE sobre compatibilidad electro-magnticaPara evitar fluctuaciones durante el arranque delcompresor (proceso tcnico), la instalacin debe

    cumplir las siguientes condiciones:

    1. La conexin elctrica de la unidad debehacerse en el cuadro de distribucin principal. Ladistribucin debe ser de baja impedancia;normalmente, la impedancia precisa se alcanzacon un fusible de 32 A.2. No hay que conectar ningn otro equipo en lamisma lnea elctrica.3. Para que la instalacin sea homologable entodos sus detalles, consulte el contrato con la

    compaa elctrica por si contiene limitacionesrelativas a productos tales como lavadoras,acondicionadores de aire u hornos elctricos.4. Vea los detalles relativos a la alimentacin delacondicionador en la placa de caractersticas delproducto.5. Consulte cualquier duda al concesionario local.

    Aire Acondicionado DC Conducto

  • 7/25/2019 Manual Conducto MUCR HF

    5/34

    ES

    4

    5. INSTALACIN DELA UNIDAD INTERIOR

    Instalacin del cuerpo principalInstalacin de los pernos de suspensin de 10(4 pernos)

    Utilice pernos para colgar de 10 La forma de hacer la instalacin del techodepende de la estructura; consulte los detalles aun especialista

    1. El techo dnde vaya a instalar la mquina debeser plano. Consolide las vigas del falso techocontra posibles vibraciones.

    2. Corte la viga del falso techo

    3. Refuerce el sitio cortado y consolide la viga delfalso techo

    Coloque las tuberas y la lnea elctrica por eltecho despus de montar el cuerpo principal.Antes de empezar a trabajar, determine ladireccin que seguirn los tubos.Especialmente en el caso de un falso techo,coloque los tubos de refrigerante, desage y loscables elctricos de las unidades interior y exteriorhasta los puntos de conexin antes de colgar lamquina.

    FORMA DE ANCLAR LOS PERNOSDE SUSPENSIN

    Estructura de madera

    Ladrillos de hormign nuevos

    Para ladrillos de hormign originales

    Estructura del techo de vigas de acero

    Coloque la tabla de madera transversalmentesobre las vigas y luego sujete los pernos decolgar (Figura 1)

    Anclaje de los pernos (Figura 2)

    Utilice pernos empotrados y herrajes de enganche(Figura 3)

    Instale y utilice directamente el angular de acerode soporte (Figura 4)

    Suspensin de la unidad interior(1) Suspenda la unidad interior en los pernos desuspensin con el bloque.

    (2) Coloque la unidad interior nivelada usando elindicador de nivel, a menos que ste puedaproducir fugas.

    Aire Acondicionado DC Conducto

  • 7/25/2019 Manual Conducto MUCR HF

    6/34

    CONEXINDELOSTUBOS

    La presin esttica exterior es de 39.2 Pa (mximo98Pa), la longitud del conducto de aire se determinaconesteparmetro.

    Posicindelagujerodeltecho,delaunidadinteriorydelospernosdesuspensin

    Esta tabla est basada en el modelo 105, por loque pueden existir diferencias en la esttica y enlas funciones.

    En caso de retorno de aire por detrs, consulte elsiguiente grfico

    En la figura anterior, la distancia entre 2 puntos

    indica las dimensiones de la caja de entrada deaire interior.Por favor, explquese claramente cuando preguntea sus clientes si necesitan una caja de entrada deaire y pregunte si la entrada es inferior o trasera

    ATENCIN

    Capacidad(Btu/h) A B C D E F G H I J K M m n

    18000 1082 1052 1112 1085 1470 12.7 6.35 252 24.5 580 290 721 2 3

    24000 1082 1052 1112 1085 1470 16 9.53 252 24.5 580 290 721 2 3

    36000 1350 1400 1380 1400 1430 16 9.53 252 35 930 310 430 3 4

    ES

    5

    6. INSTALACIN DEL

    CUERPO PRINCIPAL

    Capacidad(Btu/h) A B C D E F G H I J K L m n

    48000 1350 1400 1380 1400 1430 16 9.53 252 35 930 310 293.8 3 4

    60000 1350 1400 1380 1400 1430 16 9.53 252 35 930 310 293.8 3 4

    Aire Acondicionado DC Conducto

    Esquema panel posterior

    Cuando realice una instalacin de entrada de airetrasera, consulte la siguiente tabla:

  • 7/25/2019 Manual Conducto MUCR HF

    7/34

    ES

    7. INSTALACIN DEL PANEL

    1. Desempaquetar el soporte interior.

    Deslice el botn, suelte la hebilla del orificio delsoporte exterior y despus desempaquete elsoporte interior.

    2. Suspenda el soporte exterior en el cuerpoprincipal mirando hacia abajo. (4 sitios en 4esquinas). Cuelgue la correa en el gancho delcuerpo principal.

    El cable de seal del receptor del mando adistancia debe salir a travs del conducto de aire.

    3. Fije el soporte exterior y el conducto de aire contornillos. El tornillo se debe instalar de abajoarriba.

    4. Cuelgue el soporte exterior hasta que estfirmemente adherido al techo.

    NOTA

    5. Fije el cuerpo principal y el soporte exterior conel carril metlico de agujeros (en dos posiciones).

    Cuando cuelgue el soporte exterior con el ral, ycon la correa, presione fuerte el soporte exteriorcontra el techo y fijelo.

    6. Instale el soporte interior en el soporte exterior

    (secuencia inversa al desembalaje del soporteinterior).

    Conecte el receptor del mando a distancia con loscables de seal de la unidad interior y fjelo.

    7. Instale el mando a distancia.

    Cuelgue un lado del carril metlico de agujerosen el gancho del cuerpo principal.

    Fije el otro lado del carril metlico con un tornilloal soporte exterior.

    Corte la parte sobrante del ral con unos alicates.Doble la parte superior del extremo cortado.

    NOTA

    NOTA

    6

    Carril metlico de fijacin

    Figura 10

    Aire Acondicionado DC Conducto

  • 7/25/2019 Manual Conducto MUCR HF

    8/34

    8. INSTALACIN DE LA TUBERIADE CONEXINCompruebe que la diferencia de alturas entre las

    unidades interior y exterior, la longitud del tubo derefrigerante y el nmero de codos, satisfacen losrequisitos siguientes:

    Mida la longitud necesaria de tuberia de conexincomo se describe en los prrafos siguientes:

    Conecte primero la unidad interior y despus laexterior

    La vlvula de cierre de la unidad exterior debeestar completamente cerrada (en su estadooriginal). Siempre que haga una conexin, aflojeprimero las tuercas de la parte de la vlvula de

    cierre y conecte enseguida el tubo abocardado(en 5 minutos). Si las tuercas permanecen flojasdurante mucho tiempo, puede entrar polvo osuciedad en el circuito y provocar ms tarde una

    La unidad exterior est cargada de fbrica conrefrigerante. Algunos sistemas necesitan unacarga adicional de refrigerante dependiendo de la

    longitud de las tuberas. La carga adicional derefrigerante se puede calcular con la siguientefrmula:

    R= T X (L-5)mR(g): Refrigerante adicionalT(g) Longitud del tubo del lquidoL(m) Cantidad carga de refrigerante por metro

    Durante la instalacin, evite que entre aire, polvou otras impurezas dentro de los tubos.

    El tubo de conexin no debe instalarse hasta nohaber fijado las unidades interior y exterior.

    Mantenga seco el tubo de conexin y evite queentre humedad durante la instalacin

    Doble la tubera correctamente. No la estropee.

    Unte con aceite refrigerante la tuberaabocardada y las tuercas de las juntas y dele 3 o4 vueltas a mano antes de apretarlas con unallave (Figura 19)

    Cuando conecte o desconecte las tuberas, usesiempre dos llaves a la vez.

    Forma de conectar los tubos

    a.

    IMPORTANTE

    b.

    ES

    7

    avera. Por ello, antes de la conexin, expulse elaire del tubo refrigerante

    Debe expulsar el aire (consulte vaciado delaire) despus de conectar la conduccin de

    refrigerante a las unidades interior y exterior.Apriete, despus, las tuercas en los puntos dereparacin.

    c.

    Observaciones sobre la formade doblar los tubos

    Doble el tubo de conexinde pared ms delgado

    El ngulo de doblez no debe superar los 90La posicin del codo debe fijarse a ser posible

    en el tubo que va a doblarse. Cuanto mayor sea elcodo, mejor.

    No doble un tubo ms de tres veces

    Corte una concavidad de la forma deseada en laparte del codo del tubo de aislamiento

    Despus la tubera (cbrala con cinta despusde doblar)

    Para evitar que se apalste o se deforme, doble eltubo con el mayor radio posible

    Utilice una herramienta especial si tiene queformar radios pequeos

    Asegrese de que utiliza los mismos materialesde aislamiento cuando compre el tubo de latn(ms de 9 mm de espesor)

    Perfore un orificio en la pared (suficiente para elpasamuros, que suele tener 90 mm) y coloquedespus el pasamuros y su tapa.

    Rena los tubos de conexin y los cables yforme un haz apretado con cinta adhesiva. Nodeje que entre aire, pues podra producir goteo deagua por condensacin

    Pase los tubos unidos por el pasamuros desdeel exterior para que el tubo de refrigerante queconecta las unidades interior y exterior tenga unflujo sin obstculos.

    Use un detector o agua jabonosa paracercionarse que no hay fugas.

    Cubra la junta del tubo de conexin con launidad interior con la funda aislante/anitruidos(accesorios) y sujtela bien con cinta adhesivapara evitar fugas.

    Uso del tubo de latn comercial

    Colocacin del tuboa.

    b.

    c.

    d.

    e.

    Figura 19 Figura 20 Figura 21

    Aire Acondicionado DC Conducto

    18000

    15

    25

    48000

    20

    40

    60000

    20

    40

    Potencia (Btu/h)

    Mxima dif. de alturas

    Longitud tubo refrigerante

    Nmero de codos

    24000

    15

    30

    36000

    20

    40

    menos de 15

  • 7/25/2019 Manual Conducto MUCR HF

    9/34

    ES

    8

    9. CONEXIN DELTUBOREFRIGERANTE

    Abocardado

    Apriete las tuercas

    IMPORTANTE

    Extraiga el aire con una bomba de vaco

    1. Corte la tubera con un cortatubos.2. Inserte en la tubera una tuerca para uninabocardada y d a la tubera la formaabocardada.

    Coloque la tubera de conexin enla posicin adecuada, apriete lastuercas con la mano y despusapritelas con una llave.(Figura 24)

    Un par de apriete excesivo daar elabocardado; si es insuficiente, permitir fugas.Determine el par de apriete en la tabla 2.

    (Figura 25) (Consulte en este manual la forma deutilizacin de la vlvula de colector)

    Afloje y retire las tuercas de mantenimiento delas vlvulas de cierre A y B y conecte el latiguillode la vlvula de colector al terminal demantenimiento de la vlvula de cierre A

    Carga de refrigerante necesaria:

    El volumen de refrigerante que se debe aadir secalcula segn el manual de instalacin de launidad exterior. Asegrese de aadir la cantidadcorrecta de refrigerante.L: Longitud del conductoPor favor anote la cantidad aadida y conserve lainformacin para el mantenimiento futuro.

    1.

    (asegrese de que las dos vlvulas de cierre A yB estn cerradas).

    Conecte la junta del latiguillo a la bomba devaco.

    Abra del todo la llave de baja de la vlvula decolector.

    Ponga en marcha la bomba de vaco. Cuandocomience el bombeo, afloje un poco la tuerca delterminal de mantenimiento de la vlvula de cierreB para comprobar si entra el aire (cambia el ruidode la bomba y el indicador del manovacumetro

    Cuando haya terminado de bombear, cierre deltodo la llave de baja de la vlvula de colector ypare la bomba de vaco. Cuando haya bombeado durante ms de 15minutos, confirme que el indicador delmanovacumetro seala

    Afloje y retire la tapa cuadrada de las vlvulasde cierre A y B para abrirlas del todo; sujtelasdespus.

    Desmonte el latiguillo de la boca de reparacinde la vlvula de cierre A y apriete la tuerca.

    Se deben abrir todas las vlvulas de cierre antesde la prueba de funcionamiento. Todos losacondicionadores tienen dos vlvulas de cierre dedistintos tamaos en el lado de la unidad exterior

    que funcionan respectivamente como vlvula debaja y vlvula de alta. (Figura 26)

    2.

    3.

    4.

    5.

    6.

    7.

    marca por debajo de cero). Despus, apriete latuerca.

    1,0 x 10-5 Pa (-76 cmHg).

    IMPORTANTE

    Tamao de Parla tubera

    6,35 14,4~17,2 N m9,53 32,7~39,9 N m12,7 49,5~60,3 N m16 61.8~75.4 N m19 92.7~118.6 N m

    Tabla 2

    Dimetroexterior (mm) Mx. Mx.

    A (mm)

    6,35 8,7 8,39,53 12,4 12,012,7 15,8 15,416 19,0 18,619 23,3 22,9

    ABC, D

    Vlvula de bajaVlvula de alta

    Juntas de latubera de conexina la unidad interior.

    Figura 24

    Aire Acondicionado DC Conducto

  • 7/25/2019 Manual Conducto MUCR HF

    10/34

    ES

    9

    COMPROBACIN DE FUGAS

    AISLAMIENTO

    ompruebe que el tubo de desage no estobtruid . n edificios nuevos, esta prueba debe hacersean es de montar el falso techo

    Compruebe todas las juntas con el detector defugas o con agua jabonosa.

    Asegrese de cubrir con material aislante todaslas partes expuestas de las juntas abocardadas yla tubera de refrigerante en los lados del lquido ydel gas. Compruebe que estn bien ajustados. Un aislamiento incompleto puede causarcondensacin de agua.

    El tubo de desage de la unidad interior debeaislarse trmicamente para evitar la condensacin

    de humedad, al igual que las conexiones a dichaunidad.Utilice adhesivo de PVC para conectar los tubos

    y asegrese de que no hay fugas.Tenga cuidado para no aplicar presin en el lado

    de los tubos de la unidad interior.La pendiente descendente del tubo de desage

    debe ser de al menos 1/100, y el tubo no debetener ondulaciones.

    La longitud transversal total del tubo de desageno debe ser mayor de 20m; si este recorrido eslargo, hay que colocar soportes para evitar que se

    doble.Consulte las siguientes figuras para ver losdetalles de instalacin de los tubos.

    Co

    Et

    10. CONEXIN DELTUBODE DESAGE1. Instalacin del tubo de desagede la unidad interior

    IMPORTANTE

    La salida tiene una rosca PTI; utilice materialespara sellado y fundas de tubos cuando conectelos tubos de PVC

    2.Prueba del desage

    11.CONEXIONES ELCTRICASConexiones1. El acondicionador debe utilizar una lnea

    independiente de la tensin especificada.2. La alimentacin elctrica debe disponer detoma de tierra, que debe conectarse a las tomascorrespondientes de las unidades interior yexterior.3. Las conexiones debe realizarlas personalcualificado y siguiendo los esquemas elctricos.4. Hay que montar un protector de corrientes defuga de conformidad con el reglamento elctriconacional5. Asegrese de colocar correctamente los cablesde alimentacin y sealizacin para evitar las

    interferencias y el contacto con el tubo deconexin o el cuerpo de la vlvula de cierre.6. El cable de conexin que viene con elacondicionador tiene 10 m. Si necesita uno mslargo, asegrese de elegir uno del mismo tipo. Engeneral, no deben conectarse entre s dos cablesretorciendo las puntas; hay que soldarlos yprotegerlos con cinta aislante7. No conecte la alimentacin antes de habercomprobado las conexiones que acaba derealizar.

    Aire Acondicionado DC Conducto

  • 7/25/2019 Manual Conducto MUCR HF

    11/34

    ES

    10

    Aire Acondicionado DC Conducto

    12. ESQUEMAS ELECTRICOS

    18000 - 24000 Btu/h

    36000 - 60000 Btu/h

  • 7/25/2019 Manual Conducto MUCR HF

    12/34

    ES

    11

    Aire Acondicionado DC Conducto

    12. ESQUEMAS ELECTRICOS

    18000 - 24000 Btu/h

    36000 - 60000 Btu/h

  • 7/25/2019 Manual Conducto MUCR HF

    13/34

    ES

    12

    PRECAUCINSe debe incorporar un interruptor de conexin a la red segn las normas vigentes de cada pas

    Fases

    Tensin

    Caractersticas de la alimentacin elctrica

    Tipo (fro y calor)

    Alimentacin

    Fusible (A)

    Conexin de las unidadesinterior/exterior (mm )

    Alimentacin ud. Interior (mm )2

    2

    Fases

    Tensin

    Alimentacin ud. exterior

    Seal electrica dbil

    18000 Btu/h

    Monofsico

    220-240V - 50 Hz

    30/25

    3 x 1.0

    3 x 2,5

    Cable apantalladode tres hilos

    24000 Btu/h

    Monofsico

    220-240V - 50 Hz

    40/25

    3 x 1,0

    3 x 2,5

    Cable apantalladode tres hilos

    36000-60000 Btu/h

    Trifsico

    380V 3N - 50 Hz

    40/25

    3 x 1,0

    5 x 2,5

    Cable apantallado detres hilos

    ATENCIN

    NOTA

    Las funciones reservadas se indican en las lneasrotas, pero el usuario las puede seleccionarcuando las necesite.

    Esquema de cuadro de terminalesConsulte el esquema elctrico de la unidadinterior

    Los aires acondicionados se pueden conectar aun Monitor de Control Central. (CCM). Antes deponer la unidad en marcha, realice correctamentelas conexiones elctricas y ajuste las direccionesde red de las unidades interiores.

    CONTROLPara diferentes usos ajuste el interruptor PCB enla caja de control electrnico de la unidad interior.Despus de los ajustes, asegrese de apagar elinterruptor de alimentacin principal , luegovulvalo a conectarLos ajustes no se grabarn si no desconecta launidad.

    Por favor numere las unidades interiores durantela instalacin. Por ejemplo, para la primera unidadinterior, el nmero ser 1-1, para la segunda 1-2 yla direccin ajustada es 1 y 2, respectivamente. Elresto es analgico.

    El modelo 1 muestra las direcciones '0-F' queson las unidades interiores '0-15'El modelo 2 muestra las direcciones '0-F' queson als unidades interiores '16-31'

    Aire Acondicionado DC Conducto

  • 7/25/2019 Manual Conducto MUCR HF

    14/34

    ES

    13

    ATENCIN:1. El sistema tiene en total 64 unidades (0-63) ycada una tiene un cdigo de direccin. Si hay dosdirecciones para un solo sistema, se dar error de

    funcionamiento.Por favor, desconecte la alimentacin antes derealizar los ajustes, ya que sino se dar un error.

    13. AJUSTE DE DIRECCIONESDE RED

    Cada aire acondicionado en la red tiene slo unadireccin para diferenciarse de los otros. El cdigode direccin del aire acondicionado en el LAN seajusta con el interruptor en el modulo interfaz dered (NIM) y el rango de ajuste es 0-63.

    Cdigo interruptor de palanca

    4

    5

    8

    99

    Capacidad (Btu/h)

    18000

    24000

    36000

    4800060000

    N Tipo Contenido LED iluminado Notas

    1 ErrorEl punto de comprobacin delsensor del evaporador esanormal.

    El indicador defuncionamientoparpadea a 2.5Hz

    Una vez el error desparece,las funciones se recuperanautomticamente

    2 ErrorError de comunicacin entrela unidad interior y exterior

    El temporizadorparpadea a 2.5Hz

    Una vez el error desparece,las funciones se recuperanautomticamente

    3 Error

    El punto de comprobacin delsensor de condensacin esanormal o el sensor detemperatura de la unidadexterior es anormal.

    Todas las alarmasinteriores parpadean a0.5Hz

    Despus de quedesaparezcan los errores,

    se recuperaautomticamente

    4 ErrorEl interruptor de nivel deagua es anormal

    La alarma parpadea a2.5Hz

    Si el error no se solucionaen 3 min todas las alarmasinteriores parpadearn a0.5Hz. Desconecte launidad para recuperar lasfunciones.

    5 Alarma Conflicto de modosLa luz dedescongelacinparpadea a 2.5Hz

    Cuando la unidad interior

    pasa a modo calor o seapaga, la alarmadesaparece.

    Cdigo dedireccin

    00-15

    16-31

    32-47

    48-63

    Ajustes

    Aire Acondicionado DC Conducto

  • 7/25/2019 Manual Conducto MUCR HF

    15/34

    ES

    14

    14. PRUEBA DE FUNCIONAMIENTO1. Cuando termine toda la instalacin, debe haceruna prueba de funcionamiento

    2. Confirme los puntos siguientes antes deefectuar la prueba:

    3. Instale el soporte del mando a distancia segn

    las indicaciones del usuario, donde su sealpueda llegar a la unidad interior.

    4. Prueba de funcionamientoColoque el acondicionador en el modo deREFRIGERACIN con el mando a distancia, ycompruebe los puntos siguientes de acuerdo conel Manual del usuario. Si algo no funciona bien,corrjalo siguiendo las sugerencias del captuloAveras y sus causas del Manual del usuario.

    Las unidades interior y exterior estncorrectamente instaladas

    Los tubos y conexiones elctricas estncorrectamente instalados

    Se ha comprobado que no hay fugas en elsistema de tubos de refrigerante

    El desage no presenta obstruccionesEl aislamiento trmico funciona bienLa conexin a tierra est bien hecha

    Se ha tenido en cuenta la longitud de los tubos yla mayor capacidad de refrigeranteLa tensin de la alimentacin coincide con la

    especificada para el equipoLas entradas y salidas de aire de las unidades

    interior y exterior no estn obstaculizadasLas vlvulas de cierre de los lados de gas y

    lquido estn abiertasSe ha precalentado el acondicionador

    conectando la alimentacin elctrica

    1) Compruebe lo siguiente en la unidad interior:a. El interruptor del mando a distancia funcionacorrectamenteb. Los botones del mando a distancia funcionanbienc. El deflector del aire de salida se muevenormalmented. Se ajusta bien la temperatura de la habitacine. El indicador se enciende normalmentef. Los botones del temporizador funcionan bieng. El desage funciona correctamenteh. No hay vibraciones ni ruidos anormales durante

    el funcionamientoi. El acondicionador calienta bien si es del tipoCALOR-FRIO

    2)Compruebe lo siguiente en la unidad exterior:a. No se producen vibraciones o ruidos anormalesdurante el funcionamiento

    b. La salida de aire, el ruido o el agua condensadaque se producen no molestan a los vecinosc. No hay fugas de refrigerante

    Una funcin de proteccin impide que la unidadarranque durante los 3 minutos siguientes a unaparada.

    IMPORTANTE

    15. INSTRUCCIONES DE

    COMPROBACIN

    16. INSTRUCCIONES DE LASFUNCIONES DE LA PANTALLA

    0. Pantalla normal1. Modos de trabajo:

    0. Pausa2. Refrigeracin3. Calefaccin4. Refrigeracin forzada

    2. Velocidad de trabajo del ventilador0. Desconectar1. Baja velocidad

    2. Alta velocidad3. Demanda de capacidad4. T3 Temperatura conducto exterior (valor real)5. TP- Temperatura de descarga (Valor real, siest sobre los 100 grados slo mostrar lascentenas y las decenas)6. T4 Temperatura ambiente (valor real)7. Corriente del compresor8. Grado de apertura del PMv9. El ltimo error del cdigo de proteccin (lapantalla muestra 00 si no hay error)10. Pantalla

    1. Cuando la unidad est en pausa, el LEDmuestra el nmero de unidades interiores en lneaque pueden comunicarse con las unidadesexteriores2. Cuando est en funcionamiento, el LED

    muestra la frecuencia del compresor3. Cuando est en descongelacin, el LEDmuestra dF

    Aire Acondicionado DC Conducto

  • 7/25/2019 Manual Conducto MUCR HF

    16/34

    ES

    15

    17. CDIGOS DE ERRORDE LA UNIDAD EXTERIOR

    Pantalla Error o Proteccin

    ATENCIN

    E0 Error de EEPROME2 Error de comunicacin entre la

    unidad interior y exteriorE3 Error de comunicacin entre las

    unidades exteriores y la DSPE4 Error en el sensor de

    temperaturaE5 Proteccin de tensin del

    compresorP0 Proteccin de temperatura mxima

    del compresorP1 Proteccin de alta presinP2 Proteccin de baja tensinP3 Proteccin de corriente del

    compresorP4 Proteccin de descarga de

    temperatura del compresorP5 Proteccin de alta temperatura

    del compresorP6 Mdulo de proteccin

    Por favor, desconecte la alimentacin cuandoaparezca uno de los errores anteriores,compruebe si la tensin est fuera del rango,compruebe si la instalacin es correcta, y luegovuelva a conectar la alimentacin al cabo de 3minutos. Si el problema todava persiste, contactecon su distribuidor local

    ELIMINACIN DELELECTRODOMSTICO VIEJO

    En base a la Norma europea 2002/96/CE deResiduos de aparatos Elctricos y Electrnicos(RAEE), los electrodomsticos viejos no pueden

    ser arrojados en los contenedores municipaleshabituales; tienen que ser recogidosselectivamente para optimizar la recuperacin yreciclado de los componentes y materiales que losconstituyen, y reducir el impacto en la saludhumana y el medioambiente. El smbolo del cubode basura tachado se marca sobre todos losproductos para recordar al consumidor laobligacin de separarlos para la recogidaselectiva.El consumidor debe contactar con la autoridadlocal o con el vendedor para informarse enrelacin a la correcta eliminacin de suelectrodomstico viejo.

    Aire Acondicionado DC Conducto

  • 7/25/2019 Manual Conducto MUCR HF

    17/34

    Manual de instalacinES

    BARCELONA - Central Ventas:Provena, 392, plantas 1 y 2 - 08025 BARCELONA

    Tel. 93 446 27 80 - Fax 93 456 90 [email protected]

    SALVADOR ESCODA S.A.

    BARCELONA - T. BCN Centro:

    BADALONA - T. BCN Norte:

    HOSPITALET - Tienda BCN Sur:

    BARBER - Tienda Valls:

    MATAR - Tienda Maresme:

    ALBACETE - Delegacin:

    ALICANTE 1 - Delegacin:

    ALICANTE 2 - Delegacin:

    ALMERA - Delegacin:

    CDIZ - Delegacin:

    CASTELLN - Delegacin:

    CRDOBA - Delegacin:

    GIRONA - Delegacin:

    GRANADA - Delegacin:

    JAN - Delegacin:

    LLEIDA - Delegacin:

    MADRID 1 - Delegacin:

    MADRID 2 - Delegacin:

    MADRID 3 - Tienda:

    MLAGA - Delegacin:

    MURCIA 1 - Delegacin:

    MURCIA 2 - Delegacin:

    PALMA DE MALLORCA - Del.:

    REUS - Delegacin:

    SEVILLA 1 - Delegacin:

    SEVILLA 2 - Delegacin:

    TARRAGONA - Delegacin:

    VALENCIA 1 - Delegacin:

    VALENCIA 2 - Delegacin:

    VALENCIA 3 - Delegacin:

    ZARAGOZA - Delegacin:

    REPRESENTACIONES:AsturiasMridaPontevedra

    Rossell, 430-432 bjs.08025 Barcelona

    Tel. 93 446 20 25Fax 93 446 21 91

    Industria 608-61208918 BadalonaTel. 93 460 75 56Fax 93 460 75 71

    Av. Mare de Du de Bellvitge, 246-252 -08907 L'Hospitalet Ll.Tel. 93 377 16 75Fax 93 377 72 12

    Marconi, 2308210 Barber del Valls

    Tel. 93 718 68 26Fax 93 729 24 66

    Polgono Ind. Pl d'en BoetCarrasco i Formiguera, 29-3508302 MatarTel. 93 798 59 83

    Pol. Campollano, D, p. 8-1002007 AlbaceteTel. 967 19 21 79Fax 967 19 22 46

    Artes Grficas, 10-1203008 Alicante

    Tel. 96 511 23 42Fax 96 511 57 34

    c/. Metallurgia, Pol. Les Galgues03750 Pedreguer (Alicante)Tel. 96 645 67 55Fax 96 645 70 14

    c/. Carrera del Doctoral, 22ALMERA

    Pol. El Portal, c/. Sudfrica s/nP. E. M Eugenia, 1. 11408 JerezTel. 956 35 37 85Fax 956 35 37 89

    Av. Enrique Gimeno, 24Pol. C. Transporte. CP 12006Tel. 96 424 72 11Fax 96 424 72 03

    Juan Bautista Escudero, 219 CPol. Las Quemadas. CP 14014

    Tel. 957 32 27 30Fax 957 32 26 26

    c/. Alacant, 47 nave BPol. Can Xirg - 17005 GironaTel. 972 40 64 65Fax 972 40 64 70

    Pol. Juncaril, c/. Lanjarn, 1018220 Albolote (Granada)Tel. 958 49 10 50Fax 958 49 10 51

    Pol. Olivares, Cazalilla, p. 52723009 Jan

    Tel. 953 28 03 01Fax 953 28 03 46

    Pol. Segri, N-230, km 7,425123 Torrefarrera (Lleida)Tel. 973 75 06 90Fax 973 75 06 95

    Av. de Castilla, 26 naves 10-1128830 S. Fernando de Henares

    Tel. 91 675 12 29Fax 91 675 12 82

    Fragua, 8 - Pol. Ind. Cantuea28944 Fuenlabrada (Madrid)Tel. 91 642 35 50Fax 91 642 35 55

    Av. Emperatriz Isabel, 1928019 MadridTel. 91 469 14 52Fax 91 469 10 36

    c/. Brasilia, 16 - Pol. El Viso29006 Mlaga

    Tel. 952 04 04 08Fax 952 04 15 70

    Cuatro Caminos, 5630007 MurciaTel. 968 23 65 28Fax 968 20 43 91

    Pol. Oeste, Principal, p. 21/1030169 San Gins (Murcia)Tel. 968 88 90 02Fax 968 88 90 41

    c/. Gremi de BonetersPol. Son Castell - CP 07009

    Tel. 971 43 27 62Fax 971 43 65 35

    Vctor Catal, 4643206 Reus (Tarragona)Tel. 977 32 85 68Fax 977 32 85 61

    Joaqun S. de la Maza, PICAp. 170, m. 6-7-8. CP 41007

    Tel. 95 499 97 49Fax 95 499 99 14

    PIBO, Av. Valencina p. 124-12541110 Bollullos MitacinTel. 95 577 69 33Fax 95 577 69 35

    c/. del Ferro, 18-20Pol. Riu Clar. 43006 TarragonaTel. 977 20 64 57Fax 977 20 64 58

    Ro Eresma, s/n.46026 Valencia

    Tel. 96 395 62 64Fax 96 395 62 74

    P. I. n 7, c/.Brosquil, n. III-IV46540 El Puig (Valencia)Tel. 96 147 90 75Fax 96 147 90 52

    Parque Empresarial Tacticac/. 2A, n 10. 46980 PaternaTel. 96 134 52 47Fax 96 134 52 48

    Polgono Argualas, nave 5150012 Zaragoza

    Tel. 976 35 67 00Fax 976 35 88 12

    985 36 21 28924 33 07 18986 86 07 76

    Prxima aperturaMarzo 2007

  • 7/25/2019 Manual Conducto MUCR HF

    18/34

    Modelos:

    MUCR 18 HFMUCR 12 HF

    MUCR 24 HF

    MUCR 30 HFMUCR 36 HFMUCR 48 HFMUCR 60 HF

    Air ConditionerDC Duct Type

    Installation Manual EN

    For correct installation, read this manual before starting installation.This manual may be subject to change without notice for purpose of improvement..

  • 7/25/2019 Manual Conducto MUCR HF

    19/34

    NDICE

    1. INSTALLATION INFORMATION..............................................................................................................2

    2. ACCESORIES.........................................................................................................................................2

    3. CAUTIONS ON REMOTE CONTROLLER INSTALLATION....................................................................2

    4. INSTALATION PLACE.............................................................................................................................3

    5. INDOOR UNIT INSTALLATION...............................................................................................................4

    6. INSTALL THE MAIN BODY......................................................................................................................5

    7. PANEL INSTALLATION...........................................................................................................................6

    8. INSTALL THE CONNECTING PIPE........................................................................................................7

    9. REFRIGERANT PIPE CONNECTION....................................................................................................8

    10. CONNECT THE DRAIN PIPE...............................................................................................................9

    11. WIRING.................................................................................................................................................9

    12. WIRING CHART..................................................................................................................................10

    13. NETWORK ADDRESS SET................................................................................................................13

    14. TEST OPERATION..............................................................................................................................1415. POINT CHECK INSTRUCTION...........................................................................................................14

    16. DISPLAY FUNCTION INSTRUCTION.................................................................................................14

    17. MALFUNCTION CODE OF OUTDOOR UNIT.....................................................................................15

    Air Conditioner DC Duct Type EN

  • 7/25/2019 Manual Conducto MUCR HF

    20/34

    2

    Air Conditioner DC Duct Type EN

    1. INSTALLATION INFORMATION

    T

    f aWlW s

    Nf

    The installor should illustrate to users how tocorrectly use and maintain the air-conditioner, as

    well as remind users to carefully read and keepboth Installation Manual and Owner's Manual well.

    NOTE

    o install properly, please read this manual at

    irst. The air conditioner must be installed byqu lified persons. hen installing the indoor unit or its tubing,p ease follow this manual as strictly as possible. hen all the installation work is finished, plea eturn on the power only after a thorough check. o further announcement if there is any changeo this manual caused by product improvement.

    2. ACCESORIES

    3.CAUTIONS ON REMOTECONTROLLER INSTALLATION

    Installation manual (1)Remote controller subassembly (1)Pipe insulation material (2)Accessory drain pipe (1)Adhesive tape for seal (1)

    1. Remote controller (1)2. Frame (1)3. Mounting screw (2)4. Alkaline dry batteries (AM4)(2)5. Remote controller manual (1)

    NB e

    K

    ce

    D

    eoN

    Remote controller & its frame

    ever throw or beat the controller. efore installation, operate the remote controll rto determine its location in a reception range. eep the remote controller at least 1mapart fromthe nearest TV set or stereo equipment. (It isne essary to prevent image disturbances or noiseint rferences.) o not install the remote controller in a place

    xposed to direct sunlight or close to a heatings urce, such as a stove. ote that the positive and negative poles are inright positions when loading batteries.

  • 7/25/2019 Manual Conducto MUCR HF

    21/34

    3

    Air Conditioner DC Duct Type EN

    4. INSTALLATION PLACE

    The Indoor Unit

    The Outdoor Unit

    CAUTIONS

    T aT

    T ,

    TT

    cT

    Tn

    T ,

    TT

    Yt

    TI l

    Location in the following places may causemalfunction of the machine. (If unavoidable, pleaseconsult your local dealer.)

    a. There exists petrolatum.b.There is salty air surrounding(near the coast).c. There is caustic gas(the sulfide, for example)existing in the air (near a hot spring).d. The Volt vibrates violently(in the factories).

    e. In buses or cabinets.f. In kitchen where it is full of oil gas.g. There is strong electromagnetic wave existing.h. There are inflammable materials or gas.i. There is acid or alkaline liquid evaporating.j. Other special conditions.

    here is enough roomfor installation andmainten nce. he ceiling is horizontal, and its structure canendure the weight of the indoor unit. he air outlet and the air inlet are not impededand the influence of external air is the least. he air flow can reach throughout the room. he connecting pipe and drainpipe could beextra ted out easily. here is no direct radiation fromheaters

    here is enough room for installation andmainte ance. he air outlet and the air inlet are not impededand can not be reached by strong wind. he place is dry and ventilative. he support is flat and horizontal and can standthe weight of the outdoor unit. And no additionalnoise or vibration. our neighborhood will not feel uncomfortablewi h the noise or expelled air. here is no leakage of combustible gas. t is easy to install the connecting pipe or cab es.

    NOTES BEFORE INSTALLATION

    NOTE

    1. Select the correct carry-in path.2. Move this unit as originally packaged aspossible.

    3. If the air conditioner is installed on a metal partof the building, it must be electricallyinsulated according to the relevant standards toelectrical appliances

    Remark per EMC Directive 89/336/EECFor to prevent flicker impressions during the startof the compressor (technical process),following installation conditions apply.

    1. The power connection for the air conditioner hasto be done at the main power distribution.The distribution has to be of a low impedance,normally the required impedance reachesa 32Afusing poinat t.2. No other equipment has to be connected withthis power line.3. For detailed installation acceptance, pleaserefer to your contract with the power supplierif restrictions do apply for products like washingmachines, air conditioners or electricalovens.

    4. For power details of the air conditioner, refer tothe rating plate of the product.5. For any question contact your local dealer.

  • 7/25/2019 Manual Conducto MUCR HF

    22/34

  • 7/25/2019 Manual Conducto MUCR HF

    23/34

    NOTICEThis chart is based on 105 type, So, a littledifferences may exist on the outlook and functionsfrom yours.When using a back-air installation, please refer tothe following

    In the above figure, double-point line means thedimensions of air inlet box.

    Please explain clearly when ordering if customersneed air inlet box. And note it is belowair inlet or back air-inlet.

    INSTALLING THE DUST PROOF NETAND CANVAS AIR PASSAGE1. Install the dust proof net according to the

    installation manual.2. Install the canvas air passage underneath thedust proof net.

    The static pressure in the outside of the unit is39.2Pa (maximum98Pa), the length of theair pipe attached is determined by this parameter.

    Pipe Connection

    THE POSITIONING OF CEILING HOLE ANDINDOOR UNIT AND HANGING SCREW BOLTS

    6. INSTALL THE MAIN BODY

    Model(Btu/h) A B C D E F G H I J K M m n

    18000 1082 1052 1112 1085 1470 12.7 6.35 252 24.5 580 290 721 2 3

    24000 1082 1052 1112 1085 1470 16 9.53 252 24.5 580 290 721 2 3

    36000 1350 1400 1380 1400 1430 16 9.53 252 35 930 310 430 3 4

    5

    Model

    (Btu/h) A B C D E F G H I J K L m n

    48000 1350 1400 1380 1400 1430 16 9.53 252 35 930 310 293.8 3 4

    60000 1350 1400 1380 1400 1430 16 9.53 252 35 930 310 293.8 3 4

    Back panel layout

    Air Conditioner DC Duct Type EN

  • 7/25/2019 Manual Conducto MUCR HF

    24/34

    Air Conditioner DC Duct Type EN

    6

    5. Fix the main body and the outside frame withthe fix board of waist-shape hole (in two places)

    Hang one side of the fix board of the waist-shaped hole on the hook of the main body.

    Tighten the other side of the board with screw tothe outside frame.

    Cut off the surplus part of the board with pliers.Bend the top of the broken end.

    When hanging up the outside frame with the fixboard of waist-shaped hole and the belt, stick theoutside frame tightly to the ceiling and fix it.

    6. Install the inner frame on the outside frame (theinverse sequence of unloading the inner frame).

    Connect the remote control receiver with theindoor unit signal wires and fix it.

    7. Install remote controller.

    NOTE

    NOTE

    7. PANEL INSTALLATION

    1. Unload inner frame.Slide the knob, release the buckle fromthe outsideframe hole, then unload the inner frame.

    2. Hang the outside frame on the main body withface down. (4 places at 4 corners).Hang the belt on the hook of the main body.

    The signal wire of the remote control receiver mustbe drawn out through the canvas air passage.

    3. Fix the outside frame and the canvas airpassage with screws. Screw must be fixed on fromthe bottom to the top.

    4. Hang up the outside frame until it sticks to theceiling tightly.

    NOTE

  • 7/25/2019 Manual Conducto MUCR HF

    25/34

    8. INSTALL THE CONNECTING PIPE

    CAUTION

    CAUTION

    CONNECTTHE DRAIN PIPE

    1)

    CAUTION

    Check whether the height drop between the indoorunit and outdoor unit, the length of refrigerant pipe,and the number of the bends meet the followingrequirements:

    Measure the necessary length of the connectingpipe, and make it by the following way.

    Connect the indoor unit at first, then the outdoorunit.Bend the tubing in proper way. Do not harm to

    them.

    Do not let air, dust, or other impurities fall in thepipe systemduring the time of installation. The connecting pipe should not be installed untilthe indoor and outdoor units have been fixedalready. Keep the connecting pipe dry, and do not letmoisture in during installation.

    The outdoor unit is factory charged withrefrigerant. Some systems require additional

    charging of regrigerant depending on pipe lengths.The additional refrigerant to be charged can becalculated fromthe following formule:

    R = T X (L-5)mR(g): Additional regrigerant to be cargedT(g):The length of the liquid pipeL(m):The quantity of charged refrigerant per meter

    Daub the surfaces of the flare pipe and the jointnuts with frozen oil, and wrench it for 3~4 roundswith hands before fasten the flare nuts.(Refer to chart 16)Be sure to use two wrenches simultaneously whenyou connect or disconnect the pipes.

    The stop value of the outdoor unit should beclosed absolutely (as original state). Every timeyou connect it, first loosen the nuts at the part ofstop value , then connect the flare pipeimmediately (in 5 minutes). If the nuts have beenloosened for a long time, dusts and other

    2)

    Air Conditioner DC Duct Type EN

    7

    NOTICE FOR BENDABLE PIPE

    BEND THE CONNETCTING PIPE OF SMALLWALL THICKNESS

    Use the market brass pipe

    The bending angle should not exceed 90 .Bending position is preferably in the middle of thebendable pipe.The larger the bending radius the

    Do not bend the pipe more than three times.

    Cut out a desired concave at the bending part ofthe insulating pipe.

    Then expose the pipe (cover it with tapes afterbending).

    To prevent collapsing or deforming, please bendthe pipe at its biggest radius.

    Use bender to get a small radius pipes.

    better it is.

    Be sure to use the same insulating materials whenyou buy the brass pipe (more than 9mmthick).

    1. LocateThe Pipes1)

    2)

    3)

    4)5)

    6)

    7)

    Drill a hole in the wall (suitable just for the sizeof the wall conduit, 90mmin general), then set onthe fittings such as the wall conduit and its cover.

    Bind the connecting pipe and the cablestogether tightly with binding tapes. Do not let air in,which will cause water leakage by condensation.

    Pass the bound connecting pipe through thewall conduit fromoutside. Be careful of the pipeallocation to do no damage to the tubing.

    Connect the pipes.

    Then, open the stemof stop valves of theoutdoor unit to make the refrigerant pipeconnecting the indoor unit with the outdoor unitfluently flow.

    Be sure of no leakage by checking it with leakdetector or soap water.

    Cover the joint of the connecting pipe to theindoor unit with the soundproof/insulating sheath(fittings), and bind it well with the tapes to preventleakage.

    Chart 16 Chart 17 Chart 18

    18000

    15

    25

    48000

    20

    40

    60000

    20

    40

    Capacity (Btu/h)

    The max. height drop (m)

    Lenght of refrigerant pipe

    Number of bends (m)

    24000

    15

    30

    36000

    20

    40

    Less than 15

  • 7/25/2019 Manual Conducto MUCR HF

    26/34

    Air Conditioner DC Duct Type EN

    9. REFRIGERANT PIPECONNECTION

    Flaring

    Fasten the nuts

    CAUTION

    1. Cut a pipe with a pipe cutter.2. Insert a flare nut into a pipe and flarethe pipe.

    Put the connecting tubing at the proper position,

    wrench the nuts with hands, then fasten it with awrench.( Refer to Chart 21)

    Too large torque will harm the bellmouthingand too small will cause leakage. Pleasedetermine the torque according to Table 2.

    Outside-diameter A(mm)(mm) Max Min

    6.35 8.7 8.39.53 12.4 12.012.7 15.8 15.416 19.0 18.619 23.3 22.9

    Tubing Size Torque6.359.53

    14.4~17.2 N.m32.7~39.9 N.m

    12.71619

    49.5~60.3 N m61.8~75.4 N m92.7~118.6 N m

    Table2

    The necessary filling amount of refrigerant

    L: The length of the pipePlease record the quantity added and store itcarefully for future maintenance.

    (Refer to Chart 22)(please refer to its manual for the way of usingmanifold value)

    When you have pumped for over 15 minutes,please confirm that the indicator of multi-meter ison 1.0x10 Pa(-76cmHg).

    All the stop values should be opened before test

    operation. Each air conditioner has two stopvalues of different sizes on the side of the outdoorunit which operate as Lo-stop value and Hi-stopvalue, respectively.

    Loosen and remove the maintenance nuts ofstop values A and B, and connect the charge hoseof the manifold value with the maintenanceterminator of stop valueA. (Be sure that stopvalues A and B are bothclosed)

    Connect the joint of

    the charge hose with the vacuumpump.Open the Lo-lever of the manifold value

    completely.Turn on the vacuum pump. At the beginning of

    pumping, loosen the maintenance terminator nutof stop valueB a little to check whether the aircomes in (the sound of the pump changes, andthe indicator of compound meter turns belowzero). Then fasten the nut.

    When the pumping has finished, close the Lo-lever of the manifold value completely and turn offthe vacuum pump.

    Loosen and remove the quadrangle cover of stopvalues Aand Bto open stop value A and Bcompletely, then fasten them.

    Disassemble the charge hose fromthe repair-mouth of stop value A, and fasten the nut.

    5

    CAUTION

    Refrigerant volume to be added is calculatedaccording to outdoor unit installation manual .Be sure to add refrigerant measuring by a scale.

    Expel the air with a vacuumpump

    Chart 19 Chart 20

    Chart 21

    Chart 22

    8

  • 7/25/2019 Manual Conducto MUCR HF

    27/34

    10. CONNECT THE DRAIN PIPE

    1. Install indoor unit drain pipe

    CAUTION

    The outlet has PTI screw bread, Please usesealing materials and pipe sheath (fitting) whenconnecting PVC pipes.

    The drain pipe of indoor unit must be heatinsulated, or it will condense dew, as well as theconnections of the indoor unit.

    Hard PVC binder must be used for pipe

    connection, and make sure there is no leakage.With the connection part to the indoor unit,

    please be noted not to impose pressure on theside of indoor unit pipes.

    When the declivity of the drain pipe downwardsis over 1/100, there should not be any win ding.

    The total length of the drain pipe when pulled outtraversely shall not exceed 20m, when the pipe isover long, a prop stand must be installed toprevent winding.

    Refer to the figures on the right for theinstallation of the pipes.

    Check whether the drainpipe is unhinderedNew built house should have this test done beforepaving the ceiling.

    2. Drainage test

    Air Conditioner DC Duct Type EN

    Check the leakage

    Insulation

    Check all the joints with the leak detector or soapwater.

    Be sure to with insulating materials cover all theexposed parts of the flare pipe joints andrefrigerant pipe on the liquid-side and the gas-side. Ensure that there is no gap between them.Incomplete insulation may cause watercondensation.

    11.WIRINGAttaching wiring

    1. The air conditioner should use separate powersupply with rated voltage2. The external power supply to the air conditionershould have ground wiring, which is linked to theground wiring of the indoor and outdoor unit.3. The wiring work should be done by qualifiedpersons according to circuit drawing.4. Aleakage protector should be installedaccording to the National Standard concerningelectrical appliance.5. Be sure to locate the power wiring and thesignal wring well to avoid cross-disturbance and

    their contact with connecting pipe or stop valuebody.6. The wiring attached to this air conditioner is10m long. Be sure to prolong it with wiring of thesame type and proper length if necessary.Generally, do not twist two wiring together unlessthe joint is soldered well and covered withinsulator tape.7. Do not turn on the power until you have checkedcarefully after wiring.

    9

  • 7/25/2019 Manual Conducto MUCR HF

    28/34

    10

    12.WIRING CHART

    Air Conditioner DC Duct Type EN

  • 7/25/2019 Manual Conducto MUCR HF

    29/34

    Air Conditioner DC Duct Type EN

    11

    12.WIRING CHART

  • 7/25/2019 Manual Conducto MUCR HF

    30/34

    12

    Air Conditioner DC Duct Type EN

    The Specification of Power

    Outdoor unit power

    Weak electric signal

    18000 Btu/h

    1-Phase

    220-240V - 50 Hz

    30/25

    3 x 1,0

    3 x 2,5

    3 core shield wire

    24000 Btu/h

    1-Phase

    220-240V - 50 Hz

    40/25

    3 x 1.0

    3 x 2,5

    3 core shield wire

    36000-60000 Btu/h

    3-Phase

    380-415V - 50 Hz

    40/25

    3 x 1,0

    5 x 2,5

    3 core shield wire

    Phase

    Frequency and volt

    Type

    Power

    Circuit breaker / Fuse (A)

    Indoor/Outdoorconnecting wiring(mm )

    Indoor unit power wiring(mm )2

    2

    CAUTION

    NOTE

    The reserved function is indicated in broken linetable,users can select it when necessaryTerminal Board DiagramPlease refer to the indoor unit wiring diagramforthe wiring.

    The air-conditioners can connect with CentralControl Monitor (CCM). Before operation,please wiring correctly and set system addressand network address of indoor units.

    CAUTIONThe reserved function is indicated in broken line table,users can select it when necessary

    CONTROL

    As per the different usages to set the movingswitch on the PCB in the electric control box ofindoor unit.After the setting , be sure to cut down the mainpower supply switch, then turn it on againSetting would be invalid without disconnecting the

    power.

    Please number the indoor units during theinstallation. For example, for the first outdoor unit,the number of the first indoor unit is 1-1, thesecond indoor unit is 1-2, and the set address is1 and 2 respectively, the others is analogical.

    Model 1 show the address'0-F' respectively,

    that is, '0-15' indoor unit

    Model 2 show the address'0-F' respectively,

    that is, '16-31' indoor unit

  • 7/25/2019 Manual Conducto MUCR HF

    31/34

    Air Conditioner DC Duct Type EN

    13

    Cdigo interruptor de palanca

    4

    5

    8

    9

    9

    Capacidad (Btu/h)

    18000

    24000

    36000

    48000

    60000

    CAUTION1.The system together have 64units(0-63),everyone has only system addresscode,If two addresses are the same in one system,

    the abnormal operation will occur.2.Please switch off the power beforesetting,otherwise the unexpected error will occur.

    Network addresscode

    00-15

    16-31

    32-47

    48-63

    13. NETWORK ADDRESS SET

    Every air-conditioner in network has only one

    network address to distinguish each other.Address code of air-conditioner in LAN is set bycode switch on Network Interface Module (NIM),and the set range is 0-63

    N Type Contents LED Lamp Flash Remarks

    1 Malfunction

    2 Malfunction

    3 Malfunction

    4 Malfunction

    5 Alarm

    The evaportator sensor check pointis abnormal, or room temp. sensoris abnormal

    Indoor/Outdoor unit comunicationis abnormal

    Condenser sensor check point isabnormal or outdoor temp. sensoris abnormal

    Water level switch is abnormal

    Mode conflict

    Run lamp flashes at 2.5 Hz

    The timer lamp flashesat 2.5 Hz

    All the indoor alarm lamps

    flash at 0,5 Hz

    Alarm lamp flashesat 2.5 Hz

    Defrost lamp flashesat 2.5 Hz

    After the malfunctions disappear,it restores automatically

    After the malfunctions disappear,it restores automatically

    After the malfunctions disappear,

    it restores automatically

    If the malfunctions can't be solvedin three min. all the indoor alarmlamp flashes at 0,5Hz.Turn off the power to restore.

    When the indoor unit turns toheating mode or is turned off, thealarm will disappear

  • 7/25/2019 Manual Conducto MUCR HF

    32/34

    Air Conditioner DC Duct Type EN

    14

    14.TEST OPERATION1.The test operation must be carried out after theentire installation has been completed.

    2. Please confirm the following points before thetest operation:

    3. According to the user's requirement, install theremote controller frame where the remotecontroller's signal can reach the indoor unitsmoothly.

    4. Test operation

    Set the air conditioner under the mode of

    The indoor unit and outdoor unit are installedproperly.

    Tubing and wiring are correctly completed.The refrigerant pipe systemis leakage-checked.The drainage is unimpeded.The heating insulation works well.The ground wiring is connected correctly.The length of the tubing and the added stow

    capacity of the refrigerant have been recorded.The power voltage fits the rated voltage of the air

    conditioner.There is no obstacle at the outlet and inlet of the

    outdoor and indoor and indoor units.The gas-side and liquid-side stop values are both

    opened.The air conditioner is pre-heated by turning on

    the power.

    COOLING with the remote controller, and checkthe following points per the Owner's Manual. Ifthere is any malfunction, please resolve it throughchapter "Troubles And Causes" in the Owner'sManual.

    1) The indoor unita. Whether the switch on the remote controllerworks well.b. Whether the buttons on the remote controllerworks well.c. Whether the air flow louver moves normally.d. Whether the roomtemperature is adjusted well.e. Whether the indicator lights normally.f. Whether the temporary buttons works well.g. Whether the drainage is normal.h. Whether there is vibration or abnormal noiseduring operation.

    2) The outdoor unita. Whether there is vibration or abnormal noiseduring operation.

    b.Whether the generated wind, noise, orcondensed water by the air conditioner haveinfluenced your neighborhood.c. Whether any of the refrigerant is leaked.

    A protection device delays the start of compressorfor about 3 minutes when it is restartedimmediately after switching on the power.

    CAUTION

    15. POINT CHECK INSTRUCTION

    16. DISPLAY FUNCTIONINSTRUCTION

    0.Normally display1.Running mode:

    0.Stand by2.Cooling3.Heating4.Forced cooling

    2.Runnig fan speed0. Turn off1. Low speed2. High speed

    3. Capacity demand4. T3-Outdoor pipe temp.(Actual value)5. TP-Discharge temp.(Actual value,if over

    100degree,only display hundreds digitand tens digit)

    6.T4-Ambient temp.(Actual value)7.Current of compressor8.PMv opening degree9.The last error or protection code(Display 00 if no error)10. Display

    1. When stand by,LED displaying the amount ofindoor units online whichcommunicate with outdoor units2. When operation,LED displaying frequecny valueof compressor3. When defrost,LED displaying dF

  • 7/25/2019 Manual Conducto MUCR HF

    33/34

    15

    17. MALFUNCTION CODEOF OUTDOOR UNIT

    Display Malfunction or Protection

    E0 EEPROM malfunctionE2 Communication malfunction between

    indoor/outdoor unitsE3 Communication malfunction between

    DSP/outdoor unitsE4 T4 temperature sensor

    malfunctionE5 Compressor Voltage protectionP0 Compressor Top Temperature

    Protection

    P1 High Pressure ProtectionP2 Low Pressure ProtectionP3 Compressor current protectionP4 Compressor discharge temperature

    protectionP5 Proteccin de alta temperaturaP6 Module protection

    CAUTIONPlease cut off the power supply when appearing

    the above malfunction, check the voltage providedis out of range, check if the installation of air-conditioner is correct, then electrify again after 3minutes power off. If the problemis still existent,please contact the local service station or theequipment provider.

    Air Conditioner DC Duct Type EN

  • 7/25/2019 Manual Conducto MUCR HF

    34/34

    BARCELONA

    Head Office:

    Provena, 392, pl 1 2

    08025 BARCELONA

    &

    Export Department:

    [email protected]

    Tel. + 34 93 446 27 81

    Fax + 34 93 446 27 96

    SALVADOR ESCODA S.A.

    EN Instalation Manual