EIGRP
-
Upload
carola-romero-bonilla -
Category
Documents
-
view
217 -
download
0
description
Transcript of EIGRP
![Page 1: EIGRP](https://reader034.fdocuments.ec/reader034/viewer/2022051518/568c354f1a28ab023593c307/html5/thumbnails/1.jpg)
CONFIGURACION CON EIGRP
Contenido ROUTER 1 ............................................................................................................................................ 2
ROUTER 2 ............................................................................................................................................ 3
IMAGEN EIGRP
![Page 2: EIGRP](https://reader034.fdocuments.ec/reader034/viewer/2022051518/568c354f1a28ab023593c307/html5/thumbnails/2.jpg)
ROUTER 1
--- System Configuration Dialog ---
Continue with configuration dialog? [yes/no]: n
Press RETURN to get started!
Router>ena
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname A
A(config)#int f 0/0
A(config-if)#ip address 192.168.1.254 255.255.255.0
A(config-if)#no shwtdown
^
% Invalid input detected at '^' marker.
A(config-if)#no shutdown
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
![Page 3: EIGRP](https://reader034.fdocuments.ec/reader034/viewer/2022051518/568c354f1a28ab023593c307/html5/thumbnails/3.jpg)
A(config-if)#int s 0/0/0
A(config-if)#ip address 192.168.2.1 255.255.255.0
A(config-if)#clock rate 64000
A(config-if)#no shutdown
%LINK-5-CHANGED: Interface Serial0/0/0, changed state to down
A(config-if)#exit
A(config)#router eigrp 200
A(config-router)#network 192.168.1.0
A(config-router)#network 192.168.2.0
A(config-router)#exit
A(config)#
%LINK-5-CHANGED: Interface Serial0/0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to up
%DUAL-5-NBRCHANGE: IP-EIGRP 200: Neighbor 192.168.2.2 (Serial0/0/0) is up: new adjacency
A#
%SYS-5-CONFIG_I: Configured from console by console
ROUTER 2
--- System Configuration Dialog ---
![Page 4: EIGRP](https://reader034.fdocuments.ec/reader034/viewer/2022051518/568c354f1a28ab023593c307/html5/thumbnails/4.jpg)
Continue with configuration dialog? [yes/no]: n
Press RETURN to get started!
Router>ena
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname B
B(config)#int f 0/1
B(config-if)#ip address 192.168.3.254 255.255.255.0
B(config-if)#no shutdown
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
B(config-if)#int s 0/1/0
B(config-if)#ip address 192.168.2.2 255.255.255.0
B(config-if)#no shutdown
%LINK-5-CHANGED: Interface Serial0/1/0, changed state to up
![Page 5: EIGRP](https://reader034.fdocuments.ec/reader034/viewer/2022051518/568c354f1a28ab023593c307/html5/thumbnails/5.jpg)
B(config-if)#exit
B(config)#router
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to up
B(config)#router eigrp 200
B(config-router)#network 192.168.2.0
B(config-router)#
%DUAL-5-NBRCHANGE: IP-EIGRP 200: Neighbor 192.168.2.1 (Serial0/1/0) is up: new adjacency
B(config-router)#network 192.168.3.0
B(config-router)#exit
B(config)#exit
B#
%SYS-5-CONFIG_I: Configured from console by console
B#show ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is not set
D 192.168.1.0/24 [90/2172416] via 192.168.2.1, 00:00:42, Serial0/1/0
C 192.168.2.0/24 is directly connected, Serial0/1/0
![Page 6: EIGRP](https://reader034.fdocuments.ec/reader034/viewer/2022051518/568c354f1a28ab023593c307/html5/thumbnails/6.jpg)
C 192.168.3.0/24 is directly connected, FastEthernet0/1
B#SHOW IP PROTOCOL
Routing Protocol is "eigrp 200 "
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Default networks flagged in outgoing updates
Default networks accepted from incoming updates
EIGRP metric weight K1=1, K2=0, K3=1, K4=0, K5=0
EIGRP maximum hopcount 100
EIGRP maximum metric variance 1
Redistributing: eigrp 200
Automatic network summarization is in effect
Automatic address summarization:
Maximum path: 4
Routing for Networks:
192.168.2.0
192.168.3.0
Routing Information Sources:
Gateway Distance Last Update
192.168.2.1 90 370243
Distance: internal 90 external 170
B#show running-config
Building configuration...
![Page 7: EIGRP](https://reader034.fdocuments.ec/reader034/viewer/2022051518/568c354f1a28ab023593c307/html5/thumbnails/7.jpg)
Current configuration : 646 bytes
!
version 12.4
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname B
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
![Page 8: EIGRP](https://reader034.fdocuments.ec/reader034/viewer/2022051518/568c354f1a28ab023593c307/html5/thumbnails/8.jpg)
interface FastEthernet0/0
no ip address
duplex auto
speed auto
shutdown
!
interface FastEthernet0/1
ip address 192.168.3.254 255.255.255.0
duplex auto
speed auto
!
interface Serial0/1/0
ip address 192.168.2.2 255.255.255.0
!
interface Serial0/1/1
no ip address
shutdown
!
interface Vlan1
no ip address
shutdown
!
router eigrp 200
network 192.168.2.0
network 192.168.3.0
auto-summary
![Page 9: EIGRP](https://reader034.fdocuments.ec/reader034/viewer/2022051518/568c354f1a28ab023593c307/html5/thumbnails/9.jpg)
!
ip classless
!
!
!
!
!
!
!
line con 0
line vty 0 4
login
!
!
!
end
--More—
EIGRP CON SUBNETEO
![Page 10: EIGRP](https://reader034.fdocuments.ec/reader034/viewer/2022051518/568c354f1a28ab023593c307/html5/thumbnails/10.jpg)
ROUTER 1.1
--- System Configuration Dialog ---
Continue with configuration dialog? [yes/no]: N
Press RETURN to get started!
![Page 11: EIGRP](https://reader034.fdocuments.ec/reader034/viewer/2022051518/568c354f1a28ab023593c307/html5/thumbnails/11.jpg)
Router>ENA
Router#CON T
% Ambiguous command: "CON T"
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname A
A(config)#int f 0/0
A(config-if)#ip address 192.168.1.30 255.255.255.224
A(config-if)#no sh
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0,
changed state to up
A(config-if)#int s 0/0/0
A(config-if)#ip address 192.168.1.33 255.255.255.224
A(config-if)#clock rate 64000
A(config-if)#no sh
%LINK-5-CHANGED: Interface Serial0/0/0, changed state to down
![Page 12: EIGRP](https://reader034.fdocuments.ec/reader034/viewer/2022051518/568c354f1a28ab023593c307/html5/thumbnails/12.jpg)
A(config-if)#exit
A(config)#router eigrp 215
A(config-router)#network 192.168.1.0
A(config-router)#network 192.168.32
^
% Invalid input detected at '^' marker.
A(config-router)#
%LINK-5-CHANGED: Interface Serial0/0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed
state to up
%DUAL-5-NBRCHANGE: IP-EIGRP 215: Neighbor 192.168.1.34 (Serial0/0/0) is
up: new adjacency
ROUTER 2.2 --- System Configuration Dialog ---
Continue with configuration dialog? [yes/no]: n
Press RETURN to get started!
![Page 13: EIGRP](https://reader034.fdocuments.ec/reader034/viewer/2022051518/568c354f1a28ab023593c307/html5/thumbnails/13.jpg)
Router>ena
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname B
B(config)#int f 0/1
B(config-if)#ip address 192.168.1.94 255.255.255.224
B(config-if)#no sh
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to
up
B(config-if)#int s 0/1/0
B(config-if)#ip address 192.168.1.34 255.255.255.224
B(config-if)#no sh
%LINK-5-CHANGED: Interface Serial0/1/0, changed state to up
B(config-if)#exit
B(config)#router
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to up
![Page 14: EIGRP](https://reader034.fdocuments.ec/reader034/viewer/2022051518/568c354f1a28ab023593c307/html5/thumbnails/14.jpg)
% Incomplete command.
B(config)#router eigrp 215
B(config-router)#network 192.168.1.32
B(config-router)#
%DUAL-5-NBRCHANGE: IP-EIGRP 215: Neighbor 192.168.1.33 (Serial0/1/0) is up: new
adjacency
B(config-router)#network 192.168.1.64
B(config-router)#exit
B(config)#exit
%SYS-5-CONFIG_I: Configured from console by console
B#show ip ruter
^
% Invalid input detected at '^' marker.
B#show ip router
^
% Invalid input detected at '^' marker.
B#show ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
![Page 15: EIGRP](https://reader034.fdocuments.ec/reader034/viewer/2022051518/568c354f1a28ab023593c307/html5/thumbnails/15.jpg)
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is not set
192.168.1.0/27 is subnetted, 3 subnets
D 192.168.1.0 [90/2172416] via 192.168.1.33, 00:01:59, Serial0/1/0
C 192.168.1.32 is directly connected, Serial0/1/0
C 192.168.1.64 is directly connected, FastEthernet0/1
B#