COMERCIALIZADORA DE INSUMOS Y SUMINISTROS PUNICUS … · COMERCIALIZADORA DE INSUMOS Y SUMINISTROS...

COMERCIALIZADORA DE INSUMOS Y SUMINISTROS PUNICUS S.A. DE C.V.

Calle 21 de Marzo No. 21, Col. Santa Cruz Atzcapotzaltongo, Toluca, Estado de México, C.P. 50290

Tels.: +52 (722) 242 6975 y +52 (722) 242 6370 [email protected] | www.punicus.com.mx

mailto:[email protected]

http://www.punicus.com.mx/




Accura Tablet De-Burring & De-

Dusting (cGMP, Vibro Type)

TECHNICAL SPECIFICATIONS

MODEL ACRA-DB-300

Out Put (for 8 mm Tablet)* 5,000 to 2,50,000 tab/hr.

Powder 0.25 H.P. / 3 Phase / 1440 RPM

Max Tab. Dia 25mm

Min Tab. Dia 5 mm

Overall Dimensions 400 mm (L) x 400 (W) x 800 mm (H)

* Depending upon the characteristic of material and shape & size of tablets.

SALIENT FEATURES

Compact & elegant, well proven design.

Vibro type, cGMP. & adjustable unit.

Noiseless & Maintenance free unit.

Electric power required less than other machines of its kind.

All contact parts made of SS 304. (SS 316 Optional)

All contact parts can be easily washed and / or sterilized.

Tablet conveying route is geometrically designed, for De-burring.

Efficient de-burring & de-dusting and full suction of excess powder.

Machine can be equipped with additional brushing unit also. (Optional)

This can make additional Cleaning for better surface quality of tablets.

Machine in fitted with the castor wheels for easy mobility






Accura Tablet De-Burring & De-

Dusting (cGMP, Elevating Type)


MODEL AC-DDEL-500

Output (for 8mm tablet)* 5,000 to 2,50,000 tablet / Hour

Conveying Height Differential 250 mm

Max. Tablet Diameter 25 mm

Min. Tablet Diameter 5 mm

Power Supply 230 V, 50 Hz / 1 Ph

*Depending upon tablet shape & size.

SALIENT FEATURES

De-Dusting, De-Burring and Conveying by Vibration: The tried and tested vibration Basis of

these De-Dusters. Fine-tuning of the oscillating magnets with the spring assemblies causes

the tablet to move forward, turning and rotating along the perforated spiral. This removes

dust and burrs resulting from pressing are gently broken off.

Direct De-Dusting and Transport for any Tablet Press: The De-Dusters can be used with any

Tablet Press from any manufacturer.

Simple Disassembly for Cleaning: Loosening a Locking screws allows all the components

mounted on a central shaft to be easily removed. The outer cylinder is pulled off after opening

a collar. All components may be cleaned dry or wet, allowing optimal cleaning to be achieved

in accordance with GMP standards.

Easy Maintenance and Cleaning: The new tablet De-Duster Model AC-DDEL-500 combines

gentle conveying, burring and De-dusting action with very Low noise level, user friendly and

low maintenance, and easy cleaning operations as well. Vibration is limited to the spiral only,

this allows rigid assembly

Can be easily attached with Metal Detector Unit






Accura Dust Extractor (150 CFM, cGMP

MODEL)


MODEL ACRA-DE-150

Suction Capacity 150 C.F.M.

Inlet Connection 4 Nos of Dia 1 ½” (38.1)

Electrical Motor 1 H.P. 2800 RPM 440 V., 50 Hz, 3 Phase

Overall Dimensions 28” (L) X 19” (W) X 32” (H)

Case Dimensions (mm) 660 (L) x 470 (W) x 745 (H)

Net Weight 80 KGS

Gross Weight 100 KGS

Dust Storage Capacity 25 Ltrs.

*Depending upon tablet shape & size.

SALIENT FEATURES

The machine control the flying dust generated during the compression of tablets.

With the use of this unit flying, dust is kept to minimum but it is difficult to eliminate entirely.

Minimizes mechanical strain, excessive wear of tableting machine – resulting in minimum

machine break-downs and punch wears.

Provided with stainless steel S.S 304 contact parts (SS 316 Optional)

Blower fan is dynamically balanced.

Machine in fitted with the castor wheels for easy mobility.

Overcome dust hazards as well as cross contamination at tablet compression.

All inlet manifolds and dust collection trays are of SS 304

Two inlet manifolds facilitate to connect any Tablet press machine And two for De-burring

units.

Handle type shaking arrangements for Cleanning the filter bags.

Filter bags are of high viscose quality.






Accura Dust Extractor (300 CFM,

cGMP MODEL)


MODEL ACRA-DE-300

Suction Capacity 300 CFIVI (500 M3/HR) at 125 mm W.G.

Alteration Area 1.343 M2

Dust Storage Capacity 40 Ltr.

Inlet Manifolds (Four) Did 50 mm 2 Nos. / Did 50 mm 4 Nos.

Electric Motor 1.5 hp/2880 RPM/440 V / 50 Hz/3 Phase

Case Dimensions (mm) 720 (L) x 600 (W) x 1358 (H)

Net Weight (Approx) 170 KGS

Gross Weight (Approx) 270 KGS

Case Dimensions (mm) 870 x 1060 1575 (H)

SALIENT FEATURES

The machine control the flying dust generated during the compression of tablets.

With the use of this unit flying, dust is kept to minimum but it is difficult to eliminate entirely

Provided with stainless steel S.S 304 contact parts (SS 316-Optional)

Blower fan is dynamically balanced.

Machine in fitted with the castor wheels for easy mobility.

Overcome dust hazards as well as cross contamination at tablet compression.

Minimizes mechanical strain, excessive wear of tableting machine – resulting in minimum

machine break-downs and punch wears.

All inlet manifolds and dust collection trays are of SS 304

Four inlet manifolds facilitate to connect any Tablet press machine and two for De-burring

units.

Handle type shaking arrangements for Cleanning the filter bags.

Filter bags are of high viscose quality.






C&C200G

Uphill Deduster

C&C200G Series Uphill Tablet Deduster is new model with advanced structure. It has achieved

double functions of tablet dedusting and elevating. Inlet of the machine can be connected with any

model of tablet press, and outlet with metal detector, so that to realize the production line of tablet

dedusting, elevating, and detecting. Designed with up-to- date concepts and adopting several

advanced technologies, especially suitable for large quantities, large diameter tablets of dust removal

and high transmission, the machine is equipped with following characteristics:

Characteristics:

Body and cover of the machine take building-block design. Height of outlet is easy to adjust.

The machine working chamber and drive chamber are completely segregated with control

chamber, avoided the dust pollute the vibration device and electric control system.

360° circle adjustment of inlet and outlet to make production more convenient and save

factory room.

Fast-joint system to ensure safe and quick disassembly and assembly.

Outstanding efficiency can make mass production of cl>3- cl>35mm all-kind-shape tablet.

Parts in contact with medicine all made of 316L stainless steel. No blind spot during whole

machine cleaning. Meet cGMP demands.

New design motor driver to make machine run more smoothly with lower noise.






Safe and fast tablet conveying at high position

Technical Parameter

Model C&C200G C&C200G1 C&C200G2 C&C200G3

Tablet Diameter (mm) Ø3-Ø35

Max Output Capacity (t/h) 1,800,000(Ø6)

Inlet height (mm) 740-940 740-940 740-940 740-940

Outlet height (mm) 1,125-1,325 1,525-1,725 1,925-2,125 2,325-2,525

Dedusting Distance (m) 6.8 11.1 15.4 19.7

Power Supply 1PH 220V/110V 50Hz/60Hz 0.1kw

Compression Air 0.1m3/min 0.05MPa

Vacuum 2.7 m3/min -0.014MPa

Dimension (mm) 577 X 606 X (1362-1562) 577 X 606 X (1762-1962) 577 X 606 X (2162-2362) 577 X 606 X (2562-2762)

Weight (kg) 120 130 140 150

Note: No additional information noted if there are any changed caused by the technical development.






C&C200F

Uphill Deduster

Characteristics:

Body and cover of the machine take building-block design. Height of outlet is easy to adjust.

The machine working chamber and drive chamber are completely segregated with control

chamber, avoided the dust pollute the vibration device and electric control system.

360° circle adjustment of inlet and outlet to make production more convenient and save

factory room.


Outstanding efficiency can make mass production of C113-Cll25mm all-kind-shape tablet.




Technical Parameter

Model C&C200F C&C200F+MD C&C200FA C&C200FA+MD



Inlet height (mm) 825-1,005

Outlet height (mm) 1,210-1,390 920-1,100 1,530-1,710 1,240-1,420

Dedusting Distance (m) 7.5 11.0


Compression Air 0.1 m3/min 0.05MPa


Dimension (mm) 515 X 545 X (1365-1545) 1020 X 600 X (l365-1545) 515 X 545 X (1712-1892) 1020 X 600 X (1712-1892)

Weight (kg) 90 140 100 150







C&C200E

Uphill Deduster

Characteristics:

The machine working chamber and drive chamber are completely segregated with

control chamber, avoided the dust pollute the vibration device and electric control system.


Outstanding efficiency can make mass production of «1>3-C1>25mm all-kind-shape tablet.




Technical Parameter

Model C&C200E C&C200E+MD C&C200EA C&C200EA+MD



Inlet height (mm) 800-980

Outlet height (mm) 1,085-1265 760-940 885-1,055 560-740

Dedusting Distance (m) 6.0 3.8


Compression Air 0.1 m3/min 0.05MPa


Dimension (mm) 500 X 550 X (1280-1460) 1020 X 600 X (1280-1460) 500 X 550 X (1080-1260) 1020 X 600 X (1080-1260)

Weight (kg) 70 120 65 115







C&C100

C&C100 / C&C100A / C&C100C

Capsule Polisher

C&C100C series Capsule Polisher has achieved double functions of capsule polishing and elevating.

Inlet of the machine can be connected with any model of capsule filling machine, and outlet with

capsule sorter and metal detector, so that to realize the production line of capsule polishing, elevating,

sorting and detecting.

Designed with up-to-date concepts and adopting several advanced technologies, the machine is

equipped with following characteristics:

Besides, with the advantages of excellent polishing performance, high production efficiency, smart

appearance and easy movement, the machine can make production more safe and standard

Double functions of capsule polishing and elevating to leave high flexibility for follow-up

equipment line;

360° circle adjustment for inlet and outlet to make production more convenient and save

factory space;

Automatically rejection of less dosage, empty, fractured and cap-body separated capsule.

Fast Dismounting to ensure safe and quick disassembly and assembly;

Parts in contact with medicine all made of 316L stainless steel or other material conforms to

modem medicine safety standards;

Detachable brush on main shaft can be thoroughly cleaned. No blind spot during whole







C&C100CDSA Online Application Sketch

Technical Parameter

Model C&C100CS C&C100CSA C&C100CS1 C&C100CSA1

Capsule Model No. 00# 0# 1# 2# 3# 4#

Max Output Capacity (pcs/h) 300,000 600,000

Inlet height (mm) 730

Outlet height (mm) 1,100 1,550 1,100 1,550


Compression Air 0.3m3/min 0.3Mpa

Vacuum 3.0 m3/min -0.01Mpa

Dimension (mm) 740 X 510 X 1500 740 X 510 X 1950 740 X 510 X 1500 740 X 510 X 1950

Weight (kg) 80 100 90 110







Different Combination with different

functions - Just For You

Several advanced technologies and up-to-date concept of designing.

Technical Parameter

Model C&C100CS C&C100CSA C&C100CS1 C&C100CSA1

Capsule Model No. 00# 0# 1# 2# 3# 4#


Inlet height (mm) 730

Outlet height (mm) 1,100 1,550 1,100 1,550


Compression Air 0.3m3/min 0.3Mpa

Vacuum 3.0 m3/min -0.0lMpa

Dimension (mm) 740 X 510 X 1500 740 X 510 X 1950 740 X 510 X 1500 740 X 510 X 1950

Weight (kg) 80 100 90 110







C&C100-1/C&C100A-1

CAPSULE POLISHER

C&C100 series capsule polishing and sorting machine is an

advanced machine with new structure. To compare it with the

traditional ones it has apparent advantage for its function and

structure. The main characters are:

Small size, good looking, adjustable height and

angles. It can be connected to any types of capsule

filling machines. Timely polishing while producing is

realized to raise the polishing quality and efficiency.

It can automatically sort out capsules with low weight,

empty body, scrap and loose piece to meet cGMP

standard.

High quality stainless steel is used inside the

medicine polishing chamber. Quick connecting parts

are also adopted to dismount the equipment more

easily and to clean more thoroughly.

Quick detachable brush and bearing are used for the

main axle. The brush and bearing can be dismounted easily. The hair of brush will not drop.

A safety device is equipped. The speed of motor is controlled by converter. The polisher can

continue to work for long time and stands moment of force

Technical Parameter

Model C&C100 / C&C100-1 C&C100A / C&C100A-1 C&C100B

Capsule Model No. 00# 0# 1# 2# 3# 4#



Compressed Air 0.25m3/min 0.3Mpa

Vacuum 2.7m3/min -0.01Mpa

Dimension (mm) 950 X 600 X (870-1000) 1150 X 600 X (870-1000) 500 X 400 X (750-1050)

Weight (kg) 35 40 15







New function - Main Shaft Blowing:

Blowing air with brush rolling bring

perfect capsule polishing performance to

you.

CLASSIC MODEL WITH

NEWLY DESIGN ELEMENTS

C&C100B

CAPSULE SORTER

Model C&C100B capsule sorter is used to select out the

empty capsules loose pieces as well as scraps after

capsule filling. It can also automatically select out those

capsules with lighter dosage. The machine can be

connected to the main production line. The capsules can

be polished after sorting process which is more suitable for

SR capsule dosages.



COMERCIALIZADORA DE INSUMOS Y SUMINISTROS PUNICUS … · COMERCIALIZADORA DE INSUMOS Y SUMINISTROS...

Documents

Transcript of COMERCIALIZADORA DE INSUMOS Y SUMINISTROS PUNICUS … · COMERCIALIZADORA DE INSUMOS Y SUMINISTROS...