AQUABATT-M2 PRESENTATION

10
THE BATTERY THAT SETS TO CHANGE POWER GENERATION FOR HOMES IN ANY PART OF THE WORLD AQUABATT-M2

Transcript of AQUABATT-M2 PRESENTATION

Page 1: AQUABATT-M2 PRESENTATION

THE BATTERY THAT SETS TO CHANGE POWER GENERATIONFOR HOMES IN ANY PART OF THE WORLD

AQUABATT-M2

Page 2: AQUABATT-M2 PRESENTATION

AQUABATT-M2

IT IS SELF GENERATING AND ABLE TO RECHARGE WITHOUT

ANY THIRD PARTY OR OUTSIDE POWER SOURCE.

Page 3: AQUABATT-M2 PRESENTATION

WHAT IS AQUABATT-M2It is a battery driven by ordinary water with tubular cells made out of alloy specially coated and treated with a proprietary formula. It is 100% environmentally friendly.

Each cell measuring the size of 10cm long can generate 1.5 Volts and 3 Watts of energy. The energy output can further be enhanced if added with a mixture of non toxic mixed powder filled in sachets. You required one small sachet of mix per filled of 5 litres of water say in a month. Users has the option to add or not to add this mix.

When water comes into contact with the cells the reaction of energy will take place. We can design the voltage output to be in 12-24 VDC at this point of time.

The system will produce energy continuously and the free flow of energy can be stored in a storage battery or connected directly to the loads. We have customized built systems such as with a power generator and EOUTPUT for better exploitation of the AQUABATT-M2 power source. (see below slides in this presentation)

Page 4: AQUABATT-M2 PRESENTATION

IT IS REVOLUTIONARY AND WILL HELP MANKIND

IN LOW COST POWER GENERATIONIN

Remote Regions Developing Countries First World Countries

Page 5: AQUABATT-M2 PRESENTATION

THE MAGIC BEGINS

The AQUABATT-M2 is liken to a mini power generator but producing energy without the use of fuel.

It is a 100% off grid power system producing energy at low cost. Its use will be most useful in remote areas and for the poor to have electricity.

Obviously this technology has limitation of use due to capacity presently available however, being able to bring energy to the poor in many places at extremely low cost is a great plus for the company.

On going R & D for bigger capacity of 5-10KW is shows the potential to achieve this goal is of no problem.

AQUABATT-M2 will open doors for new ways of how battery power can benefit mankind at low cost.

Besides creating ways of generating electricity for the poor or even that in First World Countries, we are doing further R & D for the AQUABATT-M2 to be used in boats, motor homes and vehicles and other commercial needs.

For the meantime we will use the EOUTPUT technology to increase the final energy output by 3-4 times more.

We, MSE GREENTECH PTE LTD thinks that the AQUABATT-M2 has a fantastic potential in the energy field.

Page 6: AQUABATT-M2 PRESENTATION

OPTION 1 AQUABATT-M2 ONLY

This configuration is suitable for powering up amount of small loads

Connect the power cable from the output of the AQUABATT-M2 directly to the loads.

Make sure all loads are with DC inputs connection.

DC current appliances normally draw less energy than AC current home appliances.

The DC system is good for remote area users since they generally have less AC home appliances.

Home Distribution

Box

AQUABATT-M2

Page 7: AQUABATT-M2 PRESENTATION

OPTION 2 AQUABATT-M2 WITH DC GENERATOR

With this option of configuration the AQUABATT-M2 acts as the source of power which generates DC energy for the DC generator with DC and AC outputs to deliver to the loads.

There will be a loss of energy at the output of the power generator to the loads because of the inverter in the purchased third party generator.

However, it is also possible that we can add-on the EOUTPUT to be an integrated part of the configuration. Connect the EOUTPUT to the output socket of the AQUABATT-M2 to gain a multiplication of 3-4 times in energy output from its original source in order for the DC Generator to deliver more energy to the loads.

DC

AC

AQUABATT-M2

HomeDistribution

Box

Page 8: AQUABATT-M2 PRESENTATION

OPTION 3 AQUABATT-M2 WITH EOUTPUT

This configuration will enhance the AQUABATT-M2’S original energy output say from say 250 watts to 1KW with the use of the EOUTPUT.

Adding the EOUTPUT’S technology in the configuration will mean that you can have more energy output at low cost and reducing space requirement.

You can have the option of converting the stored energy in the storage battery bank into AC current with the addition of an inverter or using a DC/AC power generator for delivery of the energy to the loads.

Obviously the energy is best distributed via the power circuit board in the house for good protection and control.

AQUABATT-M2250 WATTS

EOUTPUT1KW

HomeDistribution

Box

Page 9: AQUABATT-M2 PRESENTATION

SOLAR POWER HOME SYSTEM

WIND POWER HOME SYSTEM

AQUABATT-M2 HOME SYSTEM

Long Charging Period Long Charging Period Continuous Energy Production

High Investment Cost High Investment Cost Very Low Investment Cost

Productivity Related to Weather Productivity Related to Wind-Flow

Works on any Weather Conditions

High Maintenance Cost High Maintenance Cost Very Low Maintenance Cost

COMPARISON

Page 10: AQUABATT-M2 PRESENTATION

AQUABATT-M2COULD BE WHAT THE WORLD IS LOOKING FORTO PROVIDE SUSTAINABLE, CHEAP & OFF-GRID

POWER SUPPLY FOR THIRD WORLD COUNTRIES.