2G Flexi MSR Guia Comisionado2 E1- SRAN TE

Welcome to Nokia Solutions and Networks

Comprobar visualmente cualquier error de la instalacin. Conexiones a tierra (importante para no haya problema tarjeta tx)Cableado alimentacin, polaridad y voltaje suministrado.Cableado de fibraConectados los cables de antena de los mdulos de radio (Rx/Tx)Cableados de tx:Cables fibra optica.Cables ethernetCable coaxial E1Cuando todo est probado encender el equipo, y comprobar el estado de los leds.Preparacin para comisionadoComprobacin visual antes del encendidoR 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal useMetadata and Change HistoryPlease delete this slide as appropriateReviewer, Review DateIaki Arauzo, 10-Mar-2014Approver, Approval Date:Owner:Iaki ArauzoDocument type:2G gua comisionadoVersionDateHandled byComments and status0.110-mar-2014Iaki Arauzo0.20.31.0R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use25/19/2014ContenidoPreparacin para el comisionado2G Flexi BTS Manager y Software BTS 2GTipos de comisionadoComisionadoR 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal useAntes de comisionar, deben estar fsicamente instalados o preinstalados el nodo 2G ( mdulos, cables alimentacin y fibra).PC con 2G Flexi BTS Site Manager instalado y con la versin adecuada al software del nodo.RG30 EX5_2.1.1 2G BTS Site Manager EX5_2.1.1_BL109RG20 solo 2G BTS Site Manager EX4.1_2G_BL044RG10 EX3.1_PP2.2 2G BTS Site Manager EX2.1_PP2.2_BL93Cable 10/100 Mbit/s Ethernet para la conexin entre BTS y Pc usuario.Parametros radio / transmisin deben estr disponibles. Estos los dar los responsable de BBDD. Configuracin BSC : la BTS debe estar ya creada en la BSC.

Preparacin para comisionadoPrerrequisitos Comisionado 1/2R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal useLa red de Transmission network: los enlaces fsicos y lgicos entre la BSC y la BTS debes estar ya configurados y funcionando, para los distintos tipos de camno fsico que haya en el emplazamiento (FO, Ethernet o E1).Preparacin para comisionadoPrerrequisitos Comisionado 2/2R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal useContenidoPreparacin para el comisionado2G Flexi BTS Manager y Software BTS 2GTipos de comisionadoComisionadoR 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal usePreparacin para comisionadoAplicacin Software necesaria para comisionar y supervisar 2G BTS Flexi Mutiradio es s 2G Flexi BTS Site Manager (mandatory)Asegurarse la compatibilidad entre la aplicacin software 2G Flexi BTS Manager y el software de la BTS GSM.RG30 EX5_2.1.1 2G BTS Site Manager EX5_2.1.1_BL109RG20 EX3.1_PP2.2 2G BTS Site Manager EX3.1_PP2.2_BL93RG10 EP3_MP3.0 2G BTS Site Manager EP3_MP3.0_BL0009Instalar 2G Flexi BTS Site Manager (1/4)

R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal usePreparacin para comisionadoChequear requerimientos PC para la instalacin .Leer el fichero ReadMe que adjunto (cada versin del BTS Manager tiene la suya)NO FUNCIONA CON WINDOWS 8.Instalar 2G Flexi BTS Site Manager (2/4)

R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal usePreparacin para comisionadoInstalar el 2G Flexi BTS Manager siguiendo las instrucciones de la aplicacin

Si se ha instalado correctamente puedes abrir la aplicacinInstalar 2G Flexi BTS Site Manager (3/4)

R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal usePreparacin para comisionadoSi se ha instalado de forma satisfactoria aparecer un icono de acceso directo tanto en el Star Menu como en el escritorio (si se ha seleccionado la opcin)

Instalar 2G Flexi BTS Site Manager (4/4)

R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use2G Flexi BTS ManagerPgina principalAl arrancar el 2G Flexi BTS EX 5.1 Site Manager aparece esta pantalla

R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use2G Flexi BTS ManagerPgina PrincipalAl arrancar el 2G Flexi BTS Site Manager aparece esta pantalla.

Para comisionar / revisar si PC conectado localmente a BTSPara re-comisionar / revisar si PC conectadpS via NetAct (remoto)Para crear ficheros SCF or (PC offline, no conectado a BTS)AyudaLista de sw BTS y lista versiones 2G Flexi BTS Site ManagerSalirR 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use5/19/20142G Flexi BTS ManagerPgina principal Local ConnectionAl hacer click en Local Connection sale esta pantalla

IP Address of ESMB/CPor defecto: sin password, dejarlo en blancoR 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use5/19/2014

2G Flexi BTS Manager Pgina principal Remote ConnectionPantalla que sale al acceder a Remote connection:Campos a rellenarR 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use5/19/2014

2G Flexi BTS Manager Pgina principal Create FilePantalla que aparece al acceder al menu Create File:Release packages and 2G Flexi BTS Site Manager versionsSirve para crearficheros configuracin en remotoR 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use5/19/2014

2G Flexi BTS Manager Pgina principal ToolsPantalla que aparece al acceder al menu Tools:

Herramienta ayuda para las distintas versiones (releases).R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use5/19/2014

2G Flexi BTS Manager Pgina principal AboutPantalla que aparece al acceder al menu About::Listado de paquetes versions instaladas y versiones 2G Flexi BTS Site manager.R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use5/19/2014ContenidoPreparacin para el comisionado2G Flexi BTS Manager y Software BTS 2GTipos de comisionadoComisionadoR 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal useTipos de comisionadoProcesos de comisionado local (1/2)El proceso de comisionado se divde en 4 tipos dependiendo el tipo de conexionado con la BTS y el estado de comisionado de la BTSBTS no conectada: Crear fichero SCF (offline). BTS conectada y uncommissioned: El usuario quiere levantar la BTS. Puede usar bien un fichero de configuracin ya hecho o puede hacerlo manualmente.BTS conectada y comisionada (integrada): El usuario pretende ampliar / cambiar la configuracin. El usuaro simplemente adjuntar la nueva configuracin con archivo o realizar cambios manualmente sobre la configuracin actual.R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use5/19/2014Tipos de comisionado Procesos de comisionado local (2/2)Las distintas formas de realizar un comisionado son: Descargar el fichero SCF que nos pasen de BBDDDescargar el fichero SCF de la BTS y hacer modificaciones sobre l. (ampliaciones)Crear fichero SCF (manual comissioning con el Commissioning Wizard)Note: NUNCA MODIFICAR Fichero Site Configuration File con el editor XML. El Commissioning Wizard nos guiar atravs de la configuracin, pestaa a pestaaThe wizard tiene estas 3 fases :Site specific InformationHardware ConfigurationTransmission Parameter R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use5/19/2014Commissioning TypesBTS no conectada

R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal useThis screen provides 3 options to the User to specify the operation to be performed: 1. Create EasyWizard Hardware Template: The user specifies this option when he wants to create a hardware template, which can be used in EasyWizard mode of commissioning. 2. Create EasyWizard Transmission Template: The user specifies this option when he wants to create a transmission template, which can be used in EasyWizard mode of commissioning. 3. Create SCF: The user specifies to prepare a partial or complete SCF by navigating through all the screens of commissioning wizard, which can be later used to commission BTS with no user intervention. 5/19/2014Tipos de comisionado BTS conetacta y sin comisionar

Se Configurar con fichero XML que nos pase BBDD (Tx y radio)Comisionado manualComisionado fichero SCF commissioning WIZARDR 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal useThis screen provides the following four options to the User: 1. Commission from EasyWizard Template File: The user selects this radio button to commission an uncommissioned BTS with EasyWizard Template. For this purpose it is mandatory to provide both hardware and transmission templates. The user will manually provide the site-specific information, Local Sectors, Antenna Settings, Battery Backup Unit, and passive unit details. User can provide the EasyWizard Template Files by browsing through the file system When the selected Transmission Template contains PIU Type as FIQA/FIYA in PWE mode, the Tunnel Setting and PseudoWire Settings information also needs to be provided. 2. Commission from SCF: The user selects this option when a complete SCF is available (it is mandatory). This will be a one-click commissioning as user specifies the file and will directly be moved to SCF preview to send it to BTS if it is a valid file and does contain complete information. 3. Commission Manually: This radio button let user to commission the BTS without using any predefined configuration. The user will specify all the data required for commissioning by moving through the complete wizard. 4. Undo Commissioning of BTS to erase bypass capacity: This options lets user remove the bypass capacity present in the un-commissioned BTS.

Undo Commissioning of BTS to erase bypass capacity option is enabled when changing the mode from TDM to PWE or vice-versa from transmission view. In this case all other options except Undo Commissioning of BTS to erase bypass capacity remain disabled and unselected.

Commission Standalone: This checkbox allows user to commission the BTS standalone, i.e. without network integration. In this mode the BTS will be successfully commissioned regardless of whether the BSC connection is present or not. At the end of commissioning the BTS will be in Local Mode until it is reset. This option can be used in conjunction with the first three options.

5/19/2014ContenidoPreparacin para el comisionado2G Flexi BTS Manager y Software BTS 2GTipos de comisionadoComisionadoR 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use

Local CommissioningIP Setup Local Commissioning PCConectar puerto LMP on ESMx con cable ethernet.Estableces las direcciones locales IP del PCr Internet Protocol v4 (TCP/IP) como sigueIP address:192.168.255.130Subnet Mask:255.255.255.0Default Gateway: nonePuede ser necesario deshabilitar Firewall para tener acceso a red local BTSDefault settings BTS : IP address: 192.168.255.1312G Flexi BTS Site Manager connection TCP Port: 275002G Flexi BTS Site Manager SW download via TCP Port: 27501

R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use5/19/2014Local Commissioning Flexi 2G BTS Site Manager (1/2)Nokia Solution Networks 2G Flexi BTS Site Manager permite al operario de BTSCommisionar / IntegrarConfigurarMonitorizar la BTS / hacer test Tipos de conexin al nodo:Conexin en local, en el emplazamientovia comunicacion desde el NMS system. (NETACT)Desde BSC ( Remote Connection). 2G Flexi BTS Site Manager sirve para mantener, comisionar e integrar Flexi Multiradio BTS.

R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use5/19/2014Local CommissioningLocal Connection

R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use5/19/2014Local Commissioning Flexi 2G BTS Site Manager windowFunciones 2G BTS Site Manager: BTS commissioningBTS supervisionBTS mantenimientoBTS test (VSWR, RSSI,)

Las vistas del menu principal:AlarmasVista logica BTSCommissioningSupervisionTransmissionTests

BarraNavegacinVista BTS Logica / HWPropiedadesVista AlarmasEstado conexinR 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use5/19/2014Local CommissioningCommissioning Wizard

Seleccionar Commissionig Wizard menu item or click the Commissionigbutton on the View Selection Bar.R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use5/19/2014Local CommissioningUndo Commissioning (1/4)

Para pasar a un-commissioned mode y se puede borrar bypass capacity (transmisin) con el decomisionadoEsto est deshabilitado en el modo remoto, ya que pierde la transmisinR 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use5/19/2014Local CommissioningUndo Commissioning (2/4)

R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use5/19/2014Local CommissioningUndo Commissioning (3/4)

Indica que la BTS se ha decomisionadoR 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use5/19/2014Local Commissioning Undo Commissioning (4/4)

En estado de uncommissioning no se detecta ningn mdulo radio. Vaciamos de configuracin el nodo.Solo se detectan mdulos RF en estado comisionado del nodo.R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use1. Select the Commissioning Wizard menu item or click the Commissioningbutton on the View Bar.5/19/2014Actualizacin Software de la BTSDescarga de software del nodo (1/3)BTS software menu

Usar version actual Actualizar SWSe descarga nuevas versiones.

Tabla compatibilidades SWPermite comprobar la configuracin SW BTS y Node manager

R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use1. Select the Commissioning Wizard menu item or click the Commissioningbutton on the View Bar.2. Select the Commission manually option.3. Click Next to continue.The Site Specific Information page opens.5/19/2014Actualizacin Software de la BTSDescarga de software del nodo (2/3)

Seleccionar SW update:Elegir el archivo RG30: MSR_EX5_211Buscar el archivo cabecera: BTSM5013.6DX

R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use1. Select the Commissioning Wizard menu item or click the Commissioningbutton on the View Bar.2. Select the Commission manually option.3. Click Next to continue.The Site Specific Information page opens.5/19/2014Local Commissioning Commissioning Manually Commissioning manual paso a paso

Se usa cuando se quiere modificar algo del nodoR 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use1. Select the Commissioning Wizard menu item or click the Commissioningbutton on the View Bar.2. Select the Commission manually option.3. Click Next to continue.The Site Specific Information page opens.5/19/2014Local Commissioning Commissioning Manually - ProcedimientoSite Specific InformationHardware ConfigurationModule ConfigurationLocal Sector SettingsAntenna SettingsRET SettingFRM EAC SettingsBattery Backup UnitOther Passive Units

Transmission parameterPhysical SettingLIF SettingsSynchronizationAbis TerminationAbis AllocationAbis ProtectionCross ConnectionQ1 ManagementR 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use5/19/2014Local Commissioning Site Specific Information

Navigation tree Permite al usuario navegar por las distintas ventanas de configuracin y actualizar o revisar sus parmetros. Los valores se mantienen durante toda el proceso.R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use4. Enter the site-specific parameters. BCF Id - Enables user to specify BCF Id. (Range 1-3000). This is a mandatory field. BSC Id - Enables user to specify BSC Id. BSC Name - Enables user to specify BSC Name. Site Id - Enables user to specify Site Identifier. Site Name - Enables user to specify the name identifier of the BTS. Location - Enables user to specify the location of the BTS. Ambient Air Temperature Offset - Enables user to specify a different ambient offset depending on the BTS configuration. Values: Normal, High, default Normal. Installation Date - Enables user to specify the date of installation of the unit. Installed By - Enables user to specify the name of the person who has installed the BTS. Notes - Enables user to specify installation notes.

5. Click Next to continue.The Hardware Configuration page opens.

Note:Ambient Air Temperature offset is used to calculate ambient temperature according to sensor temperature and rotational fan speed. Purpose of monitoring ambient air temperature is to indicate user if some problem occurs and thus can do safety handling. The Ambient Air Temparature Offset has following options: Normal: This option is used for all pole, wall, stack, indoor cabinet configurations, and outdoor cabinet configurations up to a 4+4+4. High: This option is used for full outdoor cabinet configurations and all CityTalk conversion kit installations. 5/19/2014Local Commissioning Hardware ConfigurationComm con fichero de configuracin HW o Tx

Comm con fichero de comissioning scf (total)R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use6. Select one of the following options:- Specify manually or Specify from file. To specify hardware configuration settings based on an existing SCF, select Specify from file, then select Browse. To specify hardware configuration settings based on a configuration predefined by Nokia Siemens Networks, select Specify from file, and click the folder icon. This will show the configuration picker from which user can select the configuration. User can filter the configurations shown according to the number of sectors, the carriers per sector, and/or the combining method. To specify hardware configuration from the start, select Specify manually. If the BTS connected and already commissioned, another options is Do not change settings

7. Click Next to continue.The Module Configuration page opens.5/19/2014Local Commissioning Hardware Configuration Module Configuration Conf mdulos radio HW.Se indica tal y como estn conectados a los puertos opticos mod sistema.

Se indica la potencia max por pipe del mdulo instalado.

FX: modulo triple. Rx: cabeza remota.

R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use8. Enter the module configuration parameters. The module configuration screen displays the current module configuration. User can graphically configure various radio modules, synchronization master, and radio masters. RF Module Configuration: Add and configure RF chain from OPT1 to OPT4. A maximum of four Radio Module chains can be added in either of two modes; collapsed with only FRM ID's or expanded with FRM location. User can add a chain in expanded mode. Each of these RF chains can contain up to three FRMs After adding a chain in expanded mode, user can add a RF units in increasing order of their position in the chain. User can choose between RM and RF modules. User can delete the RF chain or the RF unit by clicking the cross button on the right side of the chain. Radio Master Configuration: allows user to specify the radio master for a chain through the Radio Master Table. The Synchronization master check box allows user to specify the synchronization master.

9. Click Next to continue.The Local Sector Settings page opens.5/19/2014Local CommissioningHardware Configuration Local Sector settingconfigura and asocia antenas a solo un tipo de mdulo RF (Radio Module) a un sector local particular y especifica la potencia de los TRX, por defecto 20W

R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use10. Enter Local Sector setting parameters. Local sector settings screen allows user to configure and associate antennas of only one type of RF unit (RM) to a particular local sector. Select the local sector Id which shows the available antennas for configured RF unit. To assign an antenna to a local sector, user can select antennas from the list and move it to associated antenna list and vice versa. A local sector must have at least one antenna associated and perTRXPower parameter associated to it.

11. Click Next to continue. The Antenna Settings page opens.5/19/2014Local Commissioning Hardware Configuration Antenna Settingsantenna line settings: MHA settings, Voltaje MHA, perdidas insercin feeder loss, valores lmites

No habilitar alimentacin MHA en 2G: esta en Rxsharing se hace por nodo 3GMHA se autodetectaSe ponen valores para alarma ROE: minor 1.5 y major 1.8Se configura las prdidas totales de insercin del cableado RFR 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use12. Enter the antenna settings parameters.Select the antenna line settings from the drop-down list. User can specify MHA settings and also provide information for feeder voltage, feeder loss, VSWR minor and major limits for the selected antenna. Feeder Voltage: Select the feeder voltage for an antenna line. Possible values are 0,12 and 24 volts. Feeder Loss: Specify total antenna losses for an antenna line (including cables, jumpers and connectors). Possible values are -99.9 to 0, in steps of 0.1. VSWR minor limit: Specify VSWR minor limit for only TxRx antennas. Range of values are 1.5 to 2.9, in steps of 0.2 (Default value is 2.1). VSWR major limit: Select from the range of 2.5 to 3.5, in steps of 0.2 to specify VSWR major limit for only TxRx antennas (Default value is 3.1).

Note : VSWR minor and major limits are not applicable for even antennas

MHA Settings MHA Type - Type of MHA used with the antenna. Value: NONE /AISG/NON AISG. If MHA type is none all the associated fields are disabled. Product Type - Enables user to specify Product Type of MHA. Serial Number - Enables user to specify Serial No. of Antenna. Product code - Enables user to specify product code of MHA. Detected from - Specifies the controlling antenna MHA. This field is disabled if MHA is Non AISG. LNA number - Parameter for MHA telling LNA number inside one MHA. This field is disabled if MHA is Non AISG. Gain - Defines the gain of the mast-head amplifier. Value: 0 to 99.9 Alarm threshold - Shows threshold values only when MHA alarms enabled checkbox is checked. Disabled when MHA type is AISG and it is offline mode. Bypass Supported - Indicates if bypass mode is supported or not for MHA. Visible only when MHA type Non-AISG is selected5/20/2014

Se puede cambiar el indicador / contador de muestra Signal Strength Indicator (RSSI)Local Commissioning Hardware Configuration Antenna monitoring parametersR 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use13. Change the antenna monitoring parameters.User can change the Received Signal Strength Indicator (RSSI) sample count. The sample count defines how many samples must be made for a single RSSI measurement to be considered valid. There is only one sample count which applies to all antennas. It is not possible to set different sample counts for different antennas.

Click Next to RET settings5/19/2014

configuracion RETs online o offlineLocal Commissioning Hardware Configuration RET settingsR 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use14. RET (Remote Electrical Tilt) Settings

The RET setting page opens.The screen allows user to configuration of RETs in either online or offline mode. Offline mode allows user work in offline mode or online uncommissioned mode. User can add and delete RETs from the list. User can also configure the selected RET parameter. Online Mode allows user to work in commissioned state and settings get uploaded from the BTS. RETs (Ranging from 1 to 72) get autodetected and the fields get auto populated. User can configure the parameters for the selected RET.

Click Next to continue5/19/2014Local Commissioning Hardware Configuration RFM EAC settings

Configurar external alarm asociadas a los modulos radio. No se configuranR 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use15. External Alarm configurationFRM external alarm and control settings screen allows user to configure the external alarm lines associated with the individual FRMs. User can also see the summary of the configured alarm lines in a pictorial format.

16. Enter the FRM External Alarm parametersWhen user select the FRM from the drop down list for which user want to configure EAC lines, the table fields Module and Line Id gets auto populated with non editable values.

17. Click Next to continueThe Battery Backup Unit page opens.

5/19/2014Local CommissioningHardware Configuration Battery Backup Unit

Introducir battery backup unit parametros.No se configuraR 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use18. Enter the battery backup unit parametersOn the drop-down menu, select FPxA / WPxx / FPRx when the EBCA alarm cable is connected to the FPA connector on the ESMA System Module. Select NON_NOKIA if a 3rd party BBU is used and the BBU alarms are monitored via EAC alarm lines. (Note that the FPA connector can only be used for BBU-related alarms, not for other kind of EAC alarms).

ParametersUnit Type - Enables to select the type of the Battery Backup Unit used. Selecting the unit type enables the other items in this page.Values: No BBU Present, FPxA, WPxx, FPRx or NON_NOKIA. The mapping of these BBU unit types in SCF is: FPxA: FPMA WPxx: MIBBU FPRx: IPSU Serial No. - Enables to specify the serial number of the Battery Backup Unit. Mandatory only for the complete SCF. Product Type - Enables to specify the type of the Battery Backup Unit. Mandatory only for the complete SCF. Installation Date - Enables to specify the installation date of the Battery Backup Unit with spinner or calendar. Expiry Date - Enables to specify the expiration date of the Battery Backup Unit with spinner or calendar. Description - Enables to enter a description about the Battery Backup Unit.

19. Click Next to continue.The Other Passive Units page opens.5/19/2014Local CommissioningHardware Configuration Passive Units

Introducir los elemento pasivos. Combinadores, triplexores, splitter.R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use20. Enter the passive unit parameters. Unit Name - Enables user to specify unit type with editable combo box. FSEB Flexi System External Alarm EWxA EDGE Wideband Combiner FCIA Flexi Indoor Cabinet FCOA Flexi Outdoor Cabinet Other Cabinet FCFA Flexi Cabinet Air Filter FCDA Flexi Cabinet Smoke Detector FCSA Flexi Cabinet Site Support FPMA Flexi Power Module FPAA Flexi Power AC/DC sub-module FPBA Flexi Power Battery sub-module FPDA Flexi Power DC/DC Module EMTA 2HU Case EMHA 3HU Case FMCB 2HU Cover FMFA Flexi Mounting Kit WMPB Pole Mounting KitUser can also add more passive units to the list by typing the name of the unit the Unit Name box. User can specify information for a maximum of 20 passive units. Serial No. - Enables user to specify the Serial Number of Unit. Product Type - Enables user to specify the Type of Unit. Description - Enables user to give additional information about the unit. User can also use a bar code reader to scan the Serial Number and product code in the Product Type field from module stickers.

21. Click Next to continue.The Transmission Parameters page opens.5/19/2014Local CommissioningTransmission Parameter

Si tenemos un archivo de configuracin de transmisin transmission template file (.ept or SCF file), specify from file can be selectedUpload from BTS Se usa se quiere cambiar algn parmetro (cuando ya est integrado)Configurar manualmenteTipo de tarjeta de transporte. Siempre sera FIYBR 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use22. Select one of the options, depending on how user wish to commission the transmission settings.Selecting Specify from file gives user two options: Open either an existing Site Configuration File (SCF, with .xml file identifer), Node Level transmission file (.nod), or a Transmission template file (.ept) by selecting the Browse button. Alternatively, user can easily select a standard Transmission template file by selecting the button, which is next to the Transmission File text box. Details of the standard Transmission template files supplied with the 2G Flexi BTS Site Manager are given in Appendix List of transmission Template Files supplied with 2G Flexi BTS Site Manager. When the selected file is opened, fields in the Commissioning Wizard pages will be filled in automatically according to the parameters in the file.

Note: New transmission submodules may be damaged and will not operate correctly if they are replaced when the base transceiver station (BTS) power is switched on. Switch off the Flexi Multiradio BTS before replacing the transmission submodules. In case the transmission plug-in unit (PIU) module type changes, perform undo commissioning with removal of bypass traffic after the new PIU is inserted. After that, commission the Flexi Multiradio BTS.

Click Next to Physical Settings5/20/2014Local Commissioning (configuracin con E1 - TdM)Transmission Parameter Physical settingsSetting for Packet abis over TdM (E1)

R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use25. Physical Setting For FIPA, FIEA and FIFA, the Line Interface (LIF) Settings page opens. Note that two E1/T1 interface are free of licence control. Licences for additional E1/T1 interfaces are described in TRS Licensing. For FIQA and FIYA, the Physical Interface Settings page opens. The Physical Interface Settings page is not visible to FIPA, FIEA and FIFA. When the TDM mode is selected, after pressing Next, the Line Interface (LIF) Settings page opens, as for FIPA, FIEA and FIFA. The commissioning proceeds, as for FIPA and FIEA. When the PWE mode is selected, user start commissioning in the PW mode. For details on the PW mode commissioning, see section Commissioning in PWE mode.

Click Next to Line Interface Settings5/19/2014Local CommissioningTransmission Parameter Physical settingsSetting the E1


Click Next to Line Interface Settings5/19/2014Local CommissioningTransmission Parameter Physical settingsSettings IP address Packet abis over TdM


Click Next to Line Interface Settings5/19/2014Local CommissioningTransmission Parameter Physical settingsSetting the map Bundles


Click Next to Line Interface Settings5/19/2014Local CommissioningTransmission Parameter Physical settingsSincronizacinRx Clock E1/ 1Internal Timining

Protection y Output: se dejan por defecto.R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use25. Physical Setting For FIPA, FIEA and FIFA, the Line Interface (LIF) Settings page opens. Note that two E1/T1 interface are free of licence control. Licences for additional E1/T1 interfaces are described in TRS Licensing. For FIQA and FIYA, the Physical Interface Settings page opens. The Physical Interface Settings page is not visible to FIPA, FIEA and FIFA. When the TDM mode is selected, after pressing Next, the Line Interface (LIF) Settings page opens, as for FIPA, FIEA and FIFA. The commissioning proceeds, as for FIPA and FIEA. When the PWE mode is selected, user start commissioning in the PW mode. For details on the PW mode commissioning, see section Commissioning in PWE mode.

Click Next to Line Interface Settings5/20/2014Local Commissioning Transmission Parameter LIF SettingHabilitar los puertos E1 que se requieran. (max 12 TRX en 1 E1)Nodos con mas de 12 TRX requieren mas de 1 E1 conectado.

CRC generalmente est en uso. Chequar nodo swapeado.

R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use26. Enter the line interface parameters.User can configure line interface settings for the interface used.a) Select an interface from the list displayed in the Transmission equipment view on the left pane. For FIPA or FIQA, select also the mode (E1 or T1).b) Specify if the interface is in use and its name. The subsequent fields displayed depend on the interface mode.

27. Click Next to continue.The Synchronization view with two tabs opens.5/20/2014Local Commissioning

Abis TerminationSiempre se pone activas estas casillas:Enable Abis single mapping.Esto permite asignar a la BSC Trxsig, TCH y EDAP tal y como se han cargado BSC.Solo es necesario alocar OMUSIG:Siempre TS 31 - 32bitsR 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal useLocal Commissioning

Abis TerminationSiempre se pone activas estas casillas:Enable Abis single mapping.Esto permite asignar a la BSC Trxsig, TCH y EDAP tal y como se han cargado BSC.Solo es necesario alocar OMUSIG:Siempre TS 31 - 32bitsR 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal useAbis AllocationTransmission Parameter Abis AllocationPantalla para indicar Abis Allocation parameters (OMUSIG, TRXSIG, TCH and EDAP)Si se selecciona Enable Abis Signal Mapping, solo es necesario alocar OMUSIG el resto se colocar segn se haya definido en BSC.OMUSIG:TS: 31Signal Size 32Kbps

R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use31. Enter the Abis Allocation parameters.The traffic frame displayed is based on the selected interface.User can select: Signal type: TRXSIG, TCH, OMUSIG and EDAP Size: 16 kbps to 128 kbpsFor TCH, the only option is 128 kbps. TRX number for which the signal is meant.For EDAP, user can select more than one TRX by holding the Control (Ctrl) key while left-clicking with the mouse on the TRX names.To add a signal to the allocation, click any cell on the table. The cells will be coloured corresponding to the signal selection and granularity.TRXSIG and OMUSIG can be set on TCH. Configurations have to match with the BSC's.

32. Click Next to continue.The Abis Protection view opens.Note that Abis Protection requires a Flexi Multiradio TRS Loop Protection licence. This is described in TRS Licensing.

5/19/2014Resto pasos TransmisinAbis Protection, Crossconection Q1 management: dejar por defectoDejar por defecto:Resto de parametros Trs

R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use31. Enter the Abis Allocation parameters.The traffic frame displayed is based on the selected interface.User can select: Signal type: TRXSIG, TCH, OMUSIG and EDAP Size: 16 kbps to 128 kbpsFor TCH, the only option is 128 kbps. TRX number for which the signal is meant.For EDAP, user can select more than one TRX by holding the Control (Ctrl) key while left-clicking with the mouse on the TRX names.To add a signal to the allocation, click any cell on the table. The cells will be coloured corresponding to the signal selection and granularity.TRXSIG and OMUSIG can be set on TCH. Configurations have to match with the BSC's.

32. Click Next to continue.The Abis Protection view opens.Note that Abis Protection requires a Flexi Multiradio TRS Loop Protection licence. This is described in TRS Licensing.

5/20/2014Local CommissioningSCF preview - Summary

En este sumario compruebas todos los pasos del comisionado.Esto se compribea mirando el color del indicador. Sie es verde es todo correcto y podemos proceder a enviar configuracin. Un paso en rojo supone revisar ese punto y no nos deja enviarlo.R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use5/19/2014Local Commissioning SCF preview - Detail

R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal useOn the Detail tab, user can view a complete SCF in XML format.

If the details are correct, click Send SCF to begin the commissioning. If the details areincorrect, user can use the Back button to browse back. If there is information enteredincorrectly, the Send SCF button is not enabled and the errors are indicated by a reddot in the navigation tree

41 Click Send SCF.Expected outcomeThe commissioning process begins.5/19/2014Local CommissioningPantalla de proceso comisionado.

BCF waiting for LAPD: en este estado se queda si transmisin no es OK. O&M link not available. ChequearGDC: O&M link en BSC est enable.Transmisin E1s local esta correctamente conectada.BCF SW downloading. En el caso de que no hayamos instalado previamente en local SW nodo correcto, tarda un buen rato en descargarse de la BSC.R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use1. View the commissioning events on the Events tab.The commissioning progress lights indicate when each step has started and when it completes5/20/2014Local CommissioningCommissioning completado

R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use2. View the commissioning result.5/19/2014Local Commissioning Commissioning Report

Resumen de la ejecucinReporte detalladoOldestR 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal useWhen user have successfully completed the commissioning and the Commissioningreport is received from the BTS, the Show Report button would be enabled to view thecommissioning report that is received from BTS: power cabling tests Abis loop tests TRX loop tests EAC input testsThe EAC input test is triggered once the BTS reaches supervisory state and runs fortwo hours during which time any changes in the state of the EAC inputs is recordedto the commissioning report.In addition, alarms are monitored for 60 seconds after the supervisory state isreached, and any alarms active during that time are also recorded to the commissioningreport.5/19/2014Local CommissioningEjemplo de TRX test Falla

R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal useUnexpected outcomeIf the TRX test is failed 5/19/2014Local Commissioning BCF Object despus de comisionado SUPERVISORY

R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use3. To exit the Commissioning Wizard, click Finish.Automatic commissioning tests for inserted DTRX modulesWhen a DTRX module is inserted, the commissioning tests are also executed on it,resulting in an updated commissioning report.Note a restriction in BSC SW S13: first insert the new DTRX module(s) and then unlocktheir respective TRX objects to get the tests executed. If the TRX objects are accidentally unlocked first and the DTRX modules inserted only after that, the commissioningtests are not executed at all on those TRX objects.5/19/2014Local Commissioning Comprobar como est el sector despues de comisionado: ENABLED

R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use5/19/2014Local Commissioning TRX Object despus de comisionado: Enabled - Supervisory

R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use5/19/2014Local Commissioning Traffic trace: verificar llamadas en los TRX

Desde toolbar seleccionar Test menu seleccionar Traffic trace selecionar Sector a chequear --> click Automatic UpdateEl color amarillo indica que Radio TSL esta ocupado.R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use5/19/2014Local Commissioning Guardar fichero commissioning SCF file de la BTS

Desde la toolbar seleccionar Commissioning menu selecc Fetch SCF from BTS Grabar SCF file (.xml) en local PCR 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use5/19/2014Local Commissioning Conseguir fichero de commissioning report

Del toolbar seleccionar Commissioning menu select Report seleccionar Fetch from BTS Guardar Commissioning Report en Local PCR 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use5/19/2014Local Commissioning Conseguir fichero Site Information

Desde toolbar seleccionar Supervision menu seleccionar Site Information Guardar Site Information file en Local PCR 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use5/19/2014Local Commissioning Chequear en la BSC (1/2): Pedir a GDC que lo comprueben Usar MML command: ZEEI: ; usuario chequea estado BTS (sector) de una determinada BCF.OADING PROGRAM VERSION 22.4-1BSC LINDA 2010-05-10 16:38:19RADIO NETWORK CONFIGURATION IN BSC: E P B F T R C D-CHANNEL BUSY AD OP R ET- BCCH/CBCH/ R E S O&M LINK HR FR LAC CI HOP ST STATE FREQ T PCM ERACH X F U NAME ST /GP===================== == ====== ==== == ==== =========== = = == ===== == === ===

BCF-0051 FLEXI MULTIRADIO U WO 0 OM051 WO 00220 22010 BTS-0010 U WO 0 2 DEMOBTS1 -/- 6 TRX-001 U WO 12 0 51 MBCCHC P 0 TRX-002 U WO 20 0 51 0 TRX-003 U WO 30 0 47 3 TRX-004 U WO 40 0 47 3 00220 22011 BTS-0011 U WO 0 2 DEMOBTS2 -/- 6 TRX-005 U WO 50 0 51 MBCCHC P 1 TRX-006 U WO 60 0 51 1 TRX-007 U WO 70 0 47 3 TRX-008 U WO 80 0 47 3 00220 22012 BTS-0012 U WO 0 2 DEMOBTS3 -/- 1 TRX-009 U WO 90 0 51 MBCCHC P 1 TRX-010 U WO 100 0 51 1 TRX-011 U WO 110 0 47 3 TRX-012 U WO 120 0 47 3R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use5/19/2014Local Commissioning Chequear en la BSC (2/2) Pedir a GDC que lo comprueben Usar comando: ZERO: ; usuario chequea estado TRX object de cada sector.EROO:BTS=10,;.GTRX Y (EDGE) BB_UNIT EDGE HRS Y PREF PDFCA N DTRX DISABLED FREQ 12 TSC 3 FRT 0 (REGULAR) LEV N (NOT USED)DAL N (NOT USED) DAP 51 LEVD N (NOT USED)DDU INDEPENDENT SDG - SIGN 0 RFHA YTRX RF POWER - 15000 mW NUMBER OF TRX RF POWER LEVELS 16D-CH TELECOM LINK SET 70 F0151RTSL PCM-TSL SUB_TSL TYPE I.LEV ADM.STATE OP.STATE CH.STATUS------------------------------------------------------------------------------ 0 51 - MBCCHC - UNLOCKED WO 1 51- 1 1 TCHF 0 UNLOCKED WO ID 2 51- 1 2 TCHF 0 UNLOCKED WO GP 3 51- 1 3 TCHF 0 UNLOCKED WO GP 4 51- 2 0 TCHF 0 UNLOCKED WO GP 5 51- 2 1 TCHF 0 UNLOCKED WO GP 6 51- 2 2 TCHF 0 UNLOCKED WO GP 7 51- 2 3 TCHF 0 UNLOCKED WO GP

New parameter for Flexi Multiradio related to defined TRX power level R 255 G 204 B 0R 255 G 130 B 0R 127G 16B 162R 168G 187B 192R 104G 113B 122R 216G 217B 218R 0G 0B 0R 255G 255B 255Supporting colors:Primary colors:R 127G 16B 162Supporting colors:Primary colors:#2013 Nokia Solutions and Networks. All rights reserved.19-May-14Document ID / Version number / Life cycle status / Department / AuthorTo change the document information in the footer, press [Alt + F8] and use the Nokia_Solutions_and_Networks__Change_Document_InformationFor internal use5/21/2014

README

Installing Nokia Siemens Networks 2GFlexi BTS Site Manager Version EX5 0.1.1 Build 109

Table of Contents

IntroductionMinimum System RequirementsInstallationMaintenance InstructionsUninstallation

1. Introduction

This documentprovides information about installing Nokia Siemens Networks 2G Flexi BTS SiteManager. This is not a document or guide to Nokia Siemens Networks 2G Flexi BTSSite Manager itself.

This BTSManager is used for managing the Nokia Siemens Networks 2G Flexi BTS equipment.It is used for various activities like commissioning the BTS, monitoringevents, taking measurements, getting various reports from BTS, configuring dataat BTS, and viewing alarms at BTS. More details on these and other activitiescan be found in user documentation and also in BTS Manager online help.

2. Minimum System requirements

Minimum System Requirements forInstalling Nokia Siemens Networks 2G Flexi BTS Site Manager

- Windows XP Professional

- PC/Laptop with 300 megahertz or higher processorclock speed recommended

- Intel Pentium/Celeron family, or AMD K6/Athlon/Duronfamily, or compatible processor recommended

- 512 megabytes (MB) of RAM or higher recommended

- Super VGA (1024 x 768) or higher-resolution videoadapter and monitor

- Keyboard and Microsoft Mouse or compatiblepointing device.

- Windows 2000 Professional Edition

- PC/Laptop with 300 megahertz or higher processorclock speed recommended

- Intel Pentium/Celeron family, or AMDK6/Athlon/Duron family, or compatible processor recommended

- 512 megabytes (MB) of RAM or higher recommended

- Super VGA (1024 x 768) or higher-resolution videoadapter and monitor


- Windows 2000 Server Edition

- 550 MHz for x86-based computers

- 512 MB of RAM- Super VGA (1024 x 768) orhigher-resolution video adapter and monitor.


- Windows Server 2003

- 550 MHz for x86-based computers

- 512 MB of RAM- Super VGA (1024 x 768) orhigher-resolution video adapter and monitor.


- Windows Vista Business 32-bit edition

- 1 GHz for 32-bit x86-based computers

- 1 GB of RAM - Super VGA (1024 x 768) orhigher-resolution video adapter and monitor.

- Keyboard and MicrosoftMouse or compatible pointing device.

- Windows 2008 Server Standard 32-bit edition

- 1 GHz (x86 processor) or 1.4 GHz (x64 processor)

- 1 GB of RAM, 100 Mbit/sEthernet card, Super VGA (1024 768) or higher-resolution video adapter andmonitor.


- Windows 2008 Server Standard 64-bit edition




- Windows 7 Professional 32-bit edition




- Windows 7 Professional 64-bit edition




- Minimumof 100 MB minimum free disk space for installation with a minimum of 200MB freedisk space if the BTS Manager will be used to connect to a BTS.

- Nokia SiemensNetworks GCS is required for connection with BTS. 2G Flexi BTS Site Managersupports GCS R4.2 and above on all above Windows machines except Windows Vista.On Windows Vista, 2G Flexi BTS Site Manager supports GCSR6.0 and above.Preferred one is GCS R6.0, which is shipped along with BTS Manager.

3. Installation of BTS Manager

Installing 2G Flexi BTS Site Manager

To install 2GFlexi BTS Site Manager, follow these steps:

Step 1: LaunchSetup.exe

LaunchSetup.exe available in EM installable to start installation.

Step 2: Accept License Agreement

A Nokia Siemens Networks proprietary License Agreementdisplays the software license and terms of use of the 2G Flexi BTS SiteManager. Please read the agreement carefully before installing the product. Youmust accept the license agreement in order to install the product on your PC orLaptop. You can also choose to print the agreement if you have a printerconnected to your computer.

Step 3: Provide Installation Location

Thedefault install location of BTS Manager is under the 'Program Files' folder onthe machine, the absolute location is C:\Program Files\Nokia SiemensNetworks\Managers\EDGE BTS. The BTS Manager installation creates 2G Flexi BTS Site Manager folder atthis location, if not already present. The user can change installationdirectory according to his choice. If the directory does not already exist thenthe new directory will be created.

Step 3:Minimum System Requirement Check

After thelocation of installation has been specified, the installation wizard performssystem check on the computer to determine if it meets the minimum system requirementsas specified in System Requirements. The system requirement check will inform you aboutthe installation status of the GCS software on your computer. The Sun JavaRuntime Environment, Copyright Sun Microsystems Inc, is shipped along withthis BTS Manager and does not require any separate JRE installation.

Step 4:Firewall Information

Windows XP

This section is relevant if there is aMicrosoft ICF (Internet Connection Firewall) Microsoft configured on theHost PC/Laptop.

To manually open a port in Internet ConnectionFirewall (ICF) in Windows XP, follow these steps:

1. Click Start, and then click My Network Places. This will open up a Windows Explorer view with a list of known network places for your PC. The contents of this view will vary from PC to PC but on the left hand side there should be a list of tasks. If these are not visible make sure that the "Folders" button in the toolbar is not selected.

2. Under Network Tasks, click View Network Connections. This will change the view to show the network connections that are available on your PC. The number and type of connections available will vary from PC to PC. It is necessary to identify the connection that will be used to connect to the 2G Flexi BTS. The specific name of this connection will vary from PC to PC but the connection name will not contain "wireless" or "bluetooth". If you are unsure which connection will be used please consult your System Administrator or IT Helpdesk.

3. Right-click the connection that will be used to connect to the 2G Flexi BTS, and then click Properties. This will display the properties page for the connection.

4. Scroll down the list of items and choose Internet Protocol (TCP/IP) and then select the Properties button. This will display the Internet Protocol (TCP/IP) Properties page within which the IP address settings can be changed.

5. Ensure that the "Use the following IP address" radio button is selected. Enter the IP Address, Subnet mask and Default gateway according to the instructions given in the 2G Flexi BTS Site Manager connection instructions.

6. Select OK on the Internet Protocol (TCP/IP) Properties page. Then OK again on the connection Properties Page to effect the changes to the IP address settings.

For additional information, click the followingarticle numbers to view the articles in the Microsoft Knowledge Base: 283673

How to enable or disable the Personal Firewallfeature in Windows XP: 307554

How to enable or disable the Personal Firewallfeature in Windows Vista and Windows 2008: 942957

How to enable or disable the Personal Firewallfeature in Windows 2003: 555381

Programs require manual port configurations withInternet Connection Firewall

Zone Alarm

If Zone Alarm Proxy is installed on the clientmachine, following pop up shall appear when 2G Flexi BTS Site Manager tries toconnect to 2G Flexi BTS.

Select the option Remember this settingand click on Allow button to proceed.

Step 5: Ready to install

A page will be displayed informing whether requiredresources available. The user can verify all the options chosen so far. If youwish to change some options, navigate to the particular screen using the Backbutton. If you want the installation process to install or upgrade GCS on yourcomputer to 6.0, you must tick the box provided for the same.

Step 6:Copying of BTS Manager Files

Files are copied at the user-specified location underthe folder Nokia Siemens Networks\Managers\2G Flexi BTS Site Manager \

e.g. Wheninstalling BTS Manager Version 3 MP2.0 Build 0006 at user specified path D:\ProgramFiles the files are copied to this location: D:\Program Files\ Nokia Siemens Networks\Managers\2G Flexi BTS SiteManager \.

Step 7:Launch GCS setup

Launches the GCS installationprocess. Onlyapplicable if this option was selected.

Step 8: Installation complete

On successful completion of installation shortcutswill be created on your desktop and in the Start menu to launch the 2G FlexiBTS Site Manager.

Warning

1. On certain computers, you may also be required torestart your computer before running the application.

2. Usingthe change location dialog repeatedly and specifying a new location every timewould also create as many new folders in your drive. The installation processwill not delete all these interim folders.

4.Maintenance Instructions

Maintenance mode is executed when the installationapplication detects that the same version of 2G Flexi BTS Site Manager isalready installed in the system. You can use this setup either to re-install oruninstall the product. Re-installing is handled in this section,the uninstalling is handled in next section.

Re-installing 2G Flexi BTS Site Manager

To re-install 2G Flexi BTS Site Manager, follow thesesteps:

Step 1: Launch Setup.exe Or Re-installfrom Windows control panel

LaunchSetup.exe available in EM installable to start re-installation Or Select Start-> Settings -> Control Panel -> Add or Remove Programs, select 2GFlexi BTS Site Manager from list of installed programs and click Change button.

Step 2: Maintenance modeselection

Choose Re-install option and click Next onWizard page. A confirmation will appear confirming overwriting of currentlyinstalled version.

Step 3: Minimum System Requirement Check

The Minimum requirements are same as for fresh installation.

Step 4: Re-install the BTS Manager

Application files are copied to the samelocation where the product was installed previously.

Step 5: Re-install Complete

Click Finish to complete re-installation. Onsuccessful completion of re-installation, shortcuts will be created on yourdesktop and also in the Start menu to launch the 2G Flexi BTS Site Manager.

Note: - Presently 2G Flexi BTS Site Manager Installationapplication upgrades GCS version in maintenance mode only when the setup is runfrom the CD-ROM disk, not from the Start menu shortcut.

Warning :

1.On certain computers, you mayalso be required to restart your computer before running the application.

2. Re-installing the same version of the productwill over-write the previous configuration with the default settings.

5. Uninstallation

Uninstalling 2G FlexiBTS Site Manager

1.Uninstalling2G Flexi BTS Site Manager from Windows control panel

- Select Start ->Settings -> Control Panel -> Add or Remove Programs

- Select 2G Flexi BTS Site Manager from list ofinstalled programs and click Change or Remove button.

- Select Yes on confirmation dialog for uninstallation if clicked on Remove button

-Select Re-install option and proceed with Wizard if clicked on Change button

Cancellation:

1. You cannot cancel aninstallation during the time when the actual copying of files is beingperformed.

2. At any time, if you cancel an on-going installation, all temporaryfiles and folders are deleted.

Note:

1. Uninstalling the product will notaffect other installed versions or any user-created files/folders.

2. It is not recommended tore-install/uninstall 2G Flexi BTS Site Manager whilesame version of 2GFlexi BTS Site Manager is running orre-install/uninstall/upgrade GCS whenany version of2G Flexi BTS Site Manageris connected toBTS.However, if this is done, the behavior ofrunning2G FlexiBTS Site Manager application is undefined.

2G Flexi MSR Guia Comisionado2 E1- SRAN TE

Documents

Transcript of 2G Flexi MSR Guia Comisionado2 E1- SRAN TE