2001 Montero
-
Upload
josue-zepeda -
Category
Documents
-
view
215 -
download
0
Transcript of 2001 Montero
-
7/29/2019 2001 Montero
1/4
GENERAL INSTRUCTIONS
Insulating TapeBattery
Battery Cable
Before beginning work, turn the ignition key to LOCK positionand disconnect the black negative battery cable. Wrap the terminalin electrical tape to prevent it from touching the battery post.
Wait 60 seconds or more before proceeding. The Supplemental
Restraint System is designed to retain enough voltage to deploythe air bags for a short time even if the battery is disconnectedduring a crash.
As a further caution, do not let the console bump againstthe SRS control module during the radio removal operation.
Shown at left is an example of the label affixed to the radio withthe information you need.
Common household tools are needed for this project.- Medium Phillips screw driver- Flat-blade screw drivers of various sizes- Plastic spatula- Household pliers
- Electrical tape
The following instructions are intended to provide only a general overview of the radio removal process. They areintended for use by qualified technicians. Qualified technicians are properly trained individuals having the equipment,tools, safety instruction, and knowledge to do this procedure properly and safely. Please refer to the complete servicemanual on Mitsubishitechinfo.com for detailed instructions and safety warnings. If you are not comfortable in removingyour radio, we recommend taking your vehicle to an Authorized Mitsubishi Motors Dealership.
WARNING
During removal and installation of the radio, never touch or damage yellow color wire harnesses/connectorsand/or parts with a yellow connector. Those are components of the SRS air bag system. Damaging SRS airbagcomponents can result in inadvertent air bag deployment or render the SRS air bag system inoperative.
-
7/29/2019 2001 Montero
2/4
1 2
3
2
2
3
3
4
5
2
2
2
On subsequent pages of these instructions, you will finddiagrams similar to the one at left to help you access the labelaffixed to the radio chassis. Depending on the vehicle, thismay include Floor Console and Instrument Panel drawings.
-
7/29/2019 2001 Montero
3/4
2001 MONTERO
RADIO WITH CD PLAYER
1. CENTER PANEL
2. RADIO WITH CD PLAYER
3. RADIO WITH CD PLAYER BRACKET
-
7/29/2019 2001 Montero
4/4
1. CENTER PANEL ASSEMBLY
2. CLOCK OR RV METER
3. RADIO, TAPE PLAYER OR BOX
4. HEATER CONTROL ASSEMBLY
5. GLOVE BOX STOPPER
6. GLOVE BOX ASSEMBLY
7. GLOVE BOX LOCK
8. GLOVE BOX LIGHT SWITCH CONNECTOR
9. GLOVE BOX LIGHT SWITCH
10. GLOVE BOX LIGHT
11. UPPER GLOVE BOX STRIKER12. UPPER GLOVE BOX ASSEMBLY
13. UPPER GLOVE BOX LID LOCK
14. INSTRUMENT PANEL SIDE COVER
15. AIR OUTLET ASSEMBLY
16. METER BEZEL
17. COMBINATION METER
18. LOWER PANEL
19. SWITCH PANEL
20. COLUMN COVER
21. STAY A
22. STAY B
23. CORNER LOWER PANEL
24. PHOTO SENSOR CONNECTOR25. INSTRUMENT PANEL ASSEMBLY
2001 MONTERO
FLOOR CONSOLE ASSEMBLY
14
14
15
15
16 17
18
19
20
2122
23
24
25