R5 - ENGINES REFECTION PARTS Page 1

RENAULT 5 ALPINE 1397cc R1223 - 1550cc (80x77)Moteur 840-25 (76x77) DESCRIPTION REFERENCE €uro HT

Complete set of 4 liners and pistons standard Ø 76mm +pins + rings MP0112 317.32 € Set of forged pistons Ø76mm with pins and ring 1.75 + 2 + 4mm MP0186A 443.67 € Piston standard with pin and rings 76mm MP0186 64.39 € rings (1,75 + 2 + 4mm) for 4 pistons MP0114 71.18 € Cast iron liner Ø 76mm original type MP0162 49.18 € Set 4 Iron cast liner with spheroïdal graphite (SG600 ) Ø76 MP0187 354.94 € Steel liner Ø 76mm (special steel ) MP0140 140.00 € Engine 1550cc (atmo) Complete set of 4 liners and forged pistons 80mm MP0192 1522.24 € Steel liner (Ø80mm ) MP0313 187.35 € Forged piston with pin and rings ø 80mm MP0193 188.56 € Set of 4 re-used rods for mounting with pistons MP0193 MP0194 351.29 € Forges rods for competition with hole of lubrication (free axe with a forged piston and on the rod MP0199 1004.50 € Set of connecting rod bearings (for rods type origin without hole of lubrication ) MP0115 20.46 € Complete engine set for main bearings Ø 54,785 / 54,805 mm MP0116 40.19 € Side clearance of crankshaft collar 2.85 mm MP0117 8.38 € Intake valve Ø 38.7 mm ( monoblog forged typ racing ) MP0118 18.14 € Exhaust valve Ø 34.7 mm long 108mm ( monobloc forged typ racing ) MP0119 20.55 € Set of bronze valve stem guide MP0123 122.96 €

R5 ALPINE et 5 ALPINE TURBO Set 8 valve springs R5Alpine et Alpine turbo Engines (race set + hard

)MP0240 85.80 €

Complete set gasket for engine without cylinder head gasket MP0124 91.57 € Original cylinder head gasket 1.45mm MP0146 49.38 € Strengthened cylinder head gasket 1,60 mm for upgraded engine ( for piston 76mm ) MP0135 159.59 € Racing cylinder head gasket 1550 cc MP0145 173.36 € Camshaft bush MP0127 33.97 € Set of 4 Camshaft bushes for R5A group 2 MP0180 110.08 € Crankshaft MP0126 338.66 € Rubber channel seal for cylinder head cover MP0144 0 €

The connecting rod bearings and the main bearings can be delivred in any repair size.Just mention 0.25 or 0.50 etc.. before the part number

It's possible for any kind of engineOthers parts are available on request

Consult us for prices

R5 - ENGINES REFECTION PARTS Page 1A

R5 TURBO 2 TYPE 8220 Alésage / course 76 x 77 - 77x77 - 78x77 DESCRIPTION REFERENCE €uro HT

Set of 4 liners spheroidal graphite (GS600 ) (MP0187)+4 forged pistons + rings1.75 +2+4mm(MP0136 ) MP0141 703.80 € Complete set 4 steel liners Ø76 mm + 4 forged pistons Ø76mm +rings 1.75+2+4mm MP0165 1197.90 € Set of 4 Forged pistons Ø76 mm(rings 1.75 + 2+ 4mm ) + pins ( identical form MAHLE ° MP0136 489.00 € Forged piston Ø77 with pin + rings ( 1 + 1,2 + 2,8 mm) MP0182 210.74 € Set 4 Iron cast liner with spheroïdal graphite (SG600 ) Ø76 MP0187 354.94 € Set of rings for 4 forged pistons (1 + 1,2 + 2,8 mm) MP0139 51.67 € Set of rings Ø 76 mm very high quality (1.75+2+4mm) ( for 4 pistons ) MP0137 94.28 € Steel liner Ø 76mm (special steel ) MP0140 140.00 € Steel liner Ø 78mm MP0166 161.53 € Steel liner Ø77mm MP0188A 140.00 € Forged piston Ø78mm with pin and rings MP0184 210.74 € Forges rods for competition with hole of lubrication (free axe with a forged piston and on the rod MP0199 1004.50 € Set of connecting rod bearings with lubrification hole ( kit for 4 rods ) MP0120 34.33 € Complete engine set for main bearings Ø 54,785 / 54,805 mm MP0116 40.19 € Side clearance of crankshaft collar 2.85 mm MP0117 8.38 € connecting rod screws(set of 8) MP0191 110.36 € Strengthened cylinder head gasket 1,60 mm for upgraded engine ( for piston 76mm ) MP0135 159.59 € Stainless steel strengthened cylinder head gasket 2,4 mm ( for piston 76mm ) MP0133 159.59 € Strengthened cylinder head gasket 1,45 mm for standard engine MP0173 141.21 € Strenthened cylinder head gasket 1,90 mm for upgraded engine ( for piston 76mm ) MP0174 127.44 € Head cylinder gasket1.90mm for piston Ø77mm MP8538 194.87 € Head cylinder gasket 1.60mm for piston Ø77mm MP8517 173.61 € Head cylinder gasket 1.45mm forpiston Ø77 and 78mmm MP8539 173.60 € Fiber Seal for cylinder head cover.High quality MP0125 11.85 € Complete set of gaskets for engine (without cylinder head gasket ) MP0179 163.93 € Set of camshaft bushes MP0214 103.04 € Forged Intake valve Ø 38,8mm MP0121 21.49 € Forged Exhaust valve Ø 34,6mm MP0122 89.58 € Forged Exhaust valve Ø 34,6mm ( very high quality ) MP0181 104.21 € Set pushrod racing long 205mm and 178mm (holes in the cylinder head) MP0243 321.98 € Set pushrod racing has finish to adjust length between 210 and 205mm / and of 183 à178mm MP0244 321.98 € Set of bronze valve stem guide MP0123 122.96 € Valve spring lock ( kit 8 ) MP0143 16.39 €

The connecting rod bearings and the main bearings can be delivred in any repair size.Just mention 0.25 or 0.50 etc.. before the part number

It's possible for any kind of engineOthers parts are available on request

Consult us for prices

R5 - ENGINES REFECTION PARTS Page 2

R5 ALPINE TURBO R122B Moteur 840.26 840C7.26 C6J726 1397 cc 76 x 77DESCRIPTION REFERENCE €uro HT

Set of 4 liners and 4 pistons wtih pins and rings MP0175 401.80 € Cast iron liner Ø 76mm original type MP0162 49.18 € Set 4 Iron cast liner with spheroïdal graphite (SG600 ) Ø76 MP0187 354.94 € Steel liner Ø 76mm (special steel ) MP0140 140.00 € Steel liner Ø 78mm MP0166 161.53 € Steel liner Ø77mm MP0188A 140.00 € Piston Ø76mm with pin and rings (1,75 + 2 + 4 mm) MP0176 56.82 € Set of rings Ø 76 mm very high quality (1.75+2+4mm) ( for 4 pistons ) MP0137 94.28 € Forged piston with pin and rings (1.5 + 1.5 + 2,8mm ) MP0177 210.74 € Forges rods for competition with hole of lubrication (free axe with a forged piston and on the rod MP0199 1004.50 € Set of connecting rod bearings with lubrification hole ( kit for 4 rods ) MP0120 34.33 € Complete engine set for main bearings Ø 54,785 / 54,805 mm MP0116 40.19 € Side clearance of crankshaft collar 2.85 mm MP0117 8.38 € Intake valve Ø 38.7 mm ( monoblog forged typ racing ) MP0118 18.14 € Exhaust valve Ø 34.7 mm long 108mm ( monobloc forged typ racing ) MP0119 20.55 € Set of bronze valve stem guide MP0123 122.96 € Complete set of gaskets engine without cylinder head gasket MP0178 100.70 € Strengthened cylinder head gasket 1,45 mm for standard engine MP0173 141.21 € Strengthened cylinder head gasket 1,60 mm for upgraded engine ( for piston 76mm ) MP0135 159.59 € Strenthened cylinder head gasket 1,90 mm for upgraded engine ( for piston 76mm ) MP0174 127.44 €

R5 ALPINE et 5 ALPINE TURBO Set 8 valve springs R5Alpine et Alpine turbo Engines (race set + hard

)MP0240 85.80 €

SCREW for FLYWHEEL. One piece MP0373 3.85 € The connecting rod bearings and the main bearings can be delivred in any repair size.

Just mention 0.25 or 0.50 etc.. before the part numberIt's possible for any kind of engine

Others parts are available on requestConsult us for prices

R5 - ENGINES REFECTION PARTS Page 2A

R5 GT TURBO Moteur C1J 782 / 788 Ø76 - 77 - 78 Set of 4 liners and pistons with rings and pins Ø 76 mm original type MP0161 281.03 € Set 4 liners ductile cast iron Ø 76mm + 4 forged pistons Ø76mm+pins+rings MP0200 865.15 € Complete set of 4 Steel liners Ø76mm + 4 forged pistons Ø76mm +pins +rings MP0239 976.07 € Cast iron liner Ø 76mm original type MP0162 49.18 € Set 4 Iron cast liner with spheroïdal graphite (SG600 ) Ø76 MP0187 354.94 € Piston with pin and rings Ø 76 original type MP0163 64.39 € Set of rings Ø 76 mm very high quality (1.75+2+4mm) ( for 4 pistons ) MP0137 94.28 € Forged piston Ø76mm with pin and rings (1.75+2+4mm ) MP0164 133.10 € Forged piston with pin and rings Ø76,6 mm (groupe A) MP0190 241.21 € Forged piston Ø77mm with pin and rings MP0183 210.74 € Forged piston Ø78mm with pin and rings MP0184 210.74 € Steel liner Ø 76mm (special steel ) MP0140 140.00 € Steel liner Ø76.60mm MP0195 172.21 € Steel liner Ø77mm MP0188A 140.00 € Steel liner Ø 78mm MP0166 161.53 € Forges rods for competition with hole of lubrication (free axe with a forged piston and on the rod MP0199 1004.50 € Set of connecting rod bearings with lubrification hole ( kit for 4 rods ) MP0120 34.33 € Complete engine set for main bearings Ø 54,785 / 54,805 mm MP0116 40.19 € Side clearance of crankshaft collar 2.85 mm MP0117 8.38 € Set of 4 Exhaust valveforged racing group N ( 29x7x89) MP0168F4 83.19 € Set of 4 intake valves forged racing group N (34.2x7x90.70 ) MP0167F4 83.19 € Intake valve 34,1 x 7 x 90,5 MP0167 11.36 € Exhaust valve 28,9 x 7 x 88,9 MP0168 16.64 € Set of 16 valve spring locks MP0169 18.31 € Intake and Exhaust valve stem guide (Ø + 0.15) ( kit 8 parts ) MP0170 42.16 € Complete gaskets set without cylinder head gasket MP0171 115.86 € kit 8 valves stem seals MP0241 22.74 € Stainless steel strengthened cylinder head gasket 1,9 mm N group MP8502 67.20 € Strengthened cylinder head gasket 2.10 mm cylinder head rectified or increase pressure MP8501 162.40 € Head cylinder gasket .240 mm ( for piston 76mm ) MP8513 183.67 € Stainless steel strengthened cylinder head gasket 2,1 mm ( for piston 77 and 78 mm ) MP8503 159.04 € Set of screwws for cylinder head ( 10 screw ) MP0185 35.13 € Engine 1550cc (atmo) Complete set of 4 liners and forged pistons 80mm MP0192 1522.24 €

The connecting rod bearings and the main bearings can be delivred in any repair size.Just mention 0.25 or 0.50 etc.. before the part number

It's possible for any kind of engineOthers parts are available on request

Consult us for prices

R5 - SEALING BUSHES Page 4

R5 ALPINE - ALPINE TURBO DESCRIPTION REFERENCE €uro HT

Wheel side crankshaft MP0607 13.85 € Wheel side camshatf MP0615 6.67 € Cover gasket for water pump MP0617 3.09 € Oil sump gasket MP0619 22.25 € Gasket between intake manifold and head cylinder (the 4) MP0620 4.40 €

R5 GT TURBO Wheel side crankshaft MP0607 13.85 € Timing side crankshaft MP0616 8.20 € Cover gasket for water pump MP0618 3.81 € Oil sump gasket MP0619 22.25 € Gasket between intake manifold and head cylinder (the 4) MP0620 4.40 € gasket manifold inlet outlet ( graphite and stainless steel) MP8557 36.96 € Reinforced stainless steel gasket, turbo outlet MP1462 39.04 €

SUPER 5 GT TURBO Rubber cylinder cover gasket MP0621 5.40 €

R5 - OIL PUMPS Page 5

TYPE DESCRIPTION REFERENCE €uro HTR5 ALPINE rep ( 1 ) : Oil pump ( gear 25mm ) original model MP0417 77.29 €

R 5 ALPINE ( moteur préparé ) Oil pump big delivery ( pinion 31mm ) MP0400 97.58 € R5 ALPINE moteur 1397cc Spacer for oil pump fitting think 7mm for casing MP0904 and MP0927 MP0476A7 44.49 €

R5 ALPINE TURBO / TURBO 2 /

SUPER 5 GT TURBO ( 2 ) kit Oil pump MP0482 79.61 €

WATER PUMPS

TYPE DESCRIPTION REFERENCE €uro HTR5 ALPINE / ALPINE TURBO rep ( 5 ) : Unequipped pump MP0516 70.26 €

R5 Turbo 1 et 2 (..83) rep ( 7 ) : Unequipped pump MP0520 77.87 € R5 turbo 2 (84..) rep ( 12 ) : Unequipped pump MP0526 81.97 €

R5 Alpine turbo (Avec direction

assistée)rep ( 11 ) : Water pump with pulley MP0525 88.30 €

Super 5 GT turbo rep ( 1 ) : Complete pump (Striated belt) MP0531 55.04 € Super 5 GT turbo rep ( 2 ) : Complete pump (Striated belt) MP0532 73.78 €

Pompe auxiliaire competition rep ( 6 ) : Electric pump Flow 30l /mn MP0511 257.61 €

R5 - OIL FILTER AIR FILTERS Page 6

OILFILTERSTYPE DESCRIPTION REFERENCE €uro HT

R5 TURBO ( 8220 ) de 10/76 à 6/84 Oil filter ( threading 3/4-16UNF) MP0808 7.21 € R5 TURBO ( 8220 ) Depuis 7/84.. Oil filter (threading M20x1.5 ) MP0809 7.32 € R5 ALPINE (R1223 ) R5 ALPINE

TURBO ( 122B ) Oil filter (threading 3/4-16UNF ) MP0805 7.90 €

SUPER 5 GT TUBO ( C405 ) Oil filter (threading M20 x1.5 ) MP0800 7.21 €

GAZOLINE FILTERSTYPE DESCRIPTION REFERENCE €uro HT

R5 TURBO 1 et 2 - R5 ALPINE

TURBO Gasoline filter (M14x1,5 and M12 x 1.5 ) MP0803 16.70 €

SUPER 5 GT TURBO Gasoline filter MP0804 16.09 €

OIL FILTER FASTENING SET

TYPE DESCRIPTION REFERENCE €uro HTR5 Turbo (8220 ) de 10/76 à 6/84

R5 Alpine (1223 )

Bracket for derivation with screw of extension Ø3/4 -16UNF for

mounting oil radiator and block filteMP0811 43.26 €

SUPER 5 GT TURBO ( C 405 )

<BR> R5 TURBO depuis 7/84 ( 822 Braket for dérivation with screw Ø20 x 150 for mounting oil radiator MP0811A 50.18 €

AIR BOX

Replace the original element without modificationUpgraded air passagePower increasingCleanable and reusableOthers models on request

DESCRIPTION REFERENCE €uro HT Air box for 2 weber 40DCOE (170x115x45) the pair MP0816 195.17 € Air box for 2 weber 45DCOE or 48DCOE (170x115x45) the pair MP0817 195.17 € Sock Air filter MP0814 16.95 € Filtre a air pour 40DCOE( mini filtre 3 épaisseurs +grillage inox )emboitement sur la trompette MP0815A40 18.31 € Filtre a air pour 45DCOE( mini filtre 3 épaisseurs +grillage inox )emboitement sur la trompette MP0815A45 18.31 €

HIGH PERFORMANCE AIR FILTERS

Replace the original element without modificationUpgraded air passagePower increasingCleanable and reusableOthers models on request

TYPE DESCRIPTION REFERENCE €uro HTR5 TURBO Air filter ( rectangular ) MP0820 59.69 €

R5 TURBO - ALPINE TURBO Air filter performance ( cylindrical ) MP0824 46.50 € SUPER 5 GT TURBO Air filter MP0825 52.81 €

Tous modèles Set oil and cleaner for air filter MP0823 13.77 €

R5 - ALUMINIUM OIL SUMP Page 7

TYPE DESCRIPTION REFERENCE €uro HT

R5 ALPINE Low oil AUTOBLEU sump with partition for engine R5 ( rear engine

R8 / A110 )MP0927 493.63 €

R5 Alpine Oil pan set for engine with big base bearing MP0370 8.32 €

ALUMINIUM CYLINDERS HEAD COVER

DESCRIPTION REFERENCE €uro HT Cylinders head cover black treatment for engine R5 Alpine (sold complete with the gasket) MP0902 378.84 € Cylinders head cover aluminum (possible burnishing) for Cylinder head R 5 Alpine MP0902A 378.84 €