Post on 21-Jul-2016
arium® 611 UV
Product ProfileType 1* laboratory water purifi-cation system. Designed to meetthe requirements of reagentgrade water for routine analysiswhere low organic carbon levelsare required.
* Water exceeds ASTM, NCCLS, ISO and USP reagent water standards
Advanced Design FeaturesInclude:
Carbon-resin TechnologyA unique carbon-resin combina-tion enables the arium 611 UVsystem to produce ultrapurewater with a resistivity up to18.2 M¥ × cm. High purificationcapacity ensures long service lifewhile at the same timeoptimizing water flow to achievedelivery rates up to 2 l/min.Different cartridge packs areavailable to meet specific feedwater and application require-ments.
UV Oxidation ChamberIn-line horizontally mounted UVchamber, dual wavelength of 185 nm and 254 nm is capable ofreducing TOC to levels <1 ppb.
Four Line Alphanumeric VDUContinuously indicates waterquality in M¥ × cm or µS/cmwith compensated or non-com-pensated temperature. A self-diagnostic control feature monitors and displays status of the system on request.
Removable Display and Dispense Display and dispense unit can be removed from the arium 611casing enabling high qualitywater to be provided at point ofuse up to two meters from thesystems installation point.
Solid State ControlMicroprocessor controlled pro-cess-logic, continuously monitorssystem status to provide highpurity water on demand 24 hoursper day. A standby mode recircu-lates water for 15 minutes everyhour of inactivity, thereby main-taining purity levels.
Quality Inert materials used for all wetted parts guarantee the highest water purity.
Security0.2 µm asymmetric heterogene-ous pleated PESU membrane filter capsule with filling bellensures a bacterial free filtrate.Validated according to HIMA &ASTM F-838-83 guidelines.
Documentationarium 611 laboratory watersystems are designed, developedand produced under DIN/ISO9001 certified Quality Manage-ment System. Each unit is testedduring production for highestproduct quality and security. A validation guide is available on request.
Applications• High Performance Liquid
Chromatography (HPLC)• Atomic Absorption (AA)• Ion Chromatography (IC)• Inductively Coupled
Plasma (ICP)• Inductively Coupled Plasma
Mass Spectrometry (ICP/MS)
Specifications
System footprint43 cm (16.85”) Width, 33.4 cm (13.15”) Depth, 48 cm (19”) Height
System weight(including cartridges and water)22.6 kg (48.5 lb)
Removable Display/Dispense 30.2 cm (11.91”) Width, 15.7 cm (6.21”) Depth,11.3 cm (4.44”) Height
ClearancesSide 17 cm (7”) for handling Top 5 cm (2”) for ventilationFront 35 cm (14”) for door opening
Electrical power requirements100–240 V AC 50–60 Hz
Interface RS232 Parallel Port
Feed Water RequirementsSpecific Resistivity
RO water 20 K¥ × cm (50 µS/cm)Distilled water 250 K¥ × cm ( 4 µS/cm)Deionized water 50 K¥ × cm (20 µS/cm)
TOC <1000 ppbTurbidity <1 N.T.U.Silica <1000 ppb
Minimum inlet pressure: GravityMaximum inlet pressure: 7 bar (103 psi)
Ambient Temperature and Humidity
Operation 5°C–28°C (41°F–82.4°F) 80% relative humidity noncondensating
Storage 5°C–45°C (41°F–113°F)80% relative humidity noncondensating
Product Water Quality:
Resistivity 18.2 M¥ × cm
TOC <1 ppb
Particles <1/ml @ 0.2 µm
Bacteria <1 CFU/ml
Flow rate up to 2 l/min
As demands for higher water purity levelsincrease so the 611 UV can grow to meet yourneeds. Depending on your requirements the611 UV can be upgraded to include an UF module thereby increasing the outputwater product quality. An arium 611 UV forexample upgraded to UV/UF is capable of pro-ducing ultrapure water with a resistivity up to18.2 M¥ × cm, TOC level <1 ppb (using 611CKRU cartridge kit) and endotoxin level<0.001 EU/ml.
Spare parts and accessories
Cartridge kitsIncludes 1 × Inlet Pack + 1 × Polishing Pack +2 × final filters
611CKRU RO and distilled feedwater for low organicapplication
611CKDU DI feed water for loworganic application
Accessories
5441307H4-NO-B Sartopore 2 150 (Pack of 5 pieces)
611CDS2 Sanitization Kit (2 syringes)
611CDS6 Sanitization Kit (6 syringes)
611CEL1 UV lamp
611AEC1 Calibration resistor
YDP03-0CE Dot-matrix printer fordata collection
YCC01-0011M1 Interface cable for connecting the printer to the arium 611
6906937 Printer Paper for YDP03-0CE
6906918 Printer ribbon for YDP03-0CE
AC Adaptor for YDP03-0CE rated for:
6971412 Europe6971414 UK6971413 USA6971411 Australia/NZ6971410 South Africa
Sartorius AGWeender Landstrasse 94–10837075 Goettingen, Germany
Phone +49.551.308.0Fax +49.551.308.3289
www.sartorius.com/arium
USA +1.800.3687178UK +44.1372.737100France +33.1.69192100Italy +39.055.505671Spain +34.91.3588566Japan +81.3.33295533
Specifications subject to change without notice. Printed in Germany on paper that has been bleached without any use of chlorine.W/sart-000 · GPublication No.: SLG2002-e01061Order No.: 85030-514-52